Beam test table and detector dimensions » History » Revision 1

Revision 1/3 | Next »
Jimmy Caylor, 06/09/2022 12:02 PM

Beam test table and detector dimensions

Attached below is a drawing of the relative dimensions of the test stand and the detectors. On the PDF the dimensions at the top indicate the thickness of the detectors and the dimensions on the bottom indicate the distance between the faces of the detector.

The table is approximately placed at 8 m from the scattering chamber and 70 degrees beam left. This values will be updated after a survey of the table is complete.

Updated by Jimmy Caylor over 1 year ago · 1 revisions