SoLID DAQ » SoLID ECal

h1. Hallc beamtest runlist

#This file record the run list for solid ecal beamtest in HallC.

#Do not delete

slot 7 FADC250_DAC 3300 (for all 16 channels)

slot 8 FADC250_DAC 3300 (for all 16 channels)

20220620 21:30

HV slot  2:    0    0    0    0    0    0    0

HV slot 10: 1500 1500 1500 1500    0    0    0    0    0    0    0

2925 	FADC only

2926	FADC only

2927	FADC only

2928	FADC only

2929	FADC only

File not exist for run 2930-2949, debug DAQ

20220621 12:20

HV slot  2:  900  950  900    0    0    0    0

HV slot 10: 1500 1500 1500 1500 1500 1500 1500 1800 1800 1800

2950-2956	SSP only

2957	SSP only, trash

2958	debug DAQ, trash

2959	First run for FADC+SSP, good data

2960	good FADC+SSP data

2961-2964    DEBUG SSP, all trash

20220623 15:50

HV slot  2:  900  950  900 1500 1500 1500 1500 

HV slot 10: 1600 1600 1700 1600 1500 1500 1500 1800 1800 1800

From this run, trigger lost due to FIFO has an 100mv offset

2965-2968	SSP only, no trigger and debug daq, trash

2969	FADC+SSP, no trigger, trash

2970	cosmic run, no trigger, trash

2971    beam run, no trigger, trash

From run 2972, trigger is connected to another FIFO unit which has 0 offset 

20220624 12:20

HV slot  2:  900  950  900 1000 1000 1000 1000 

HV slot 10: 1600 1600 1700 1600 1500 1500 1500 1800 1800 1800

2972	debug DAQ, trash

2973	good FADC+SSP data  <------- First run for good Cherenkov HV

2974

2975    trash

2976-2981	good FADC+SSP data 	

2982	trash

2983-3002	good FADC+SSP data 	

3003-3005	debug DAQ, trash

3006-3013	good FADC+SSP data 	

3014-3015	cosmic 

3016		daq crash, no output files

3017-3018	debug daq, trash

3019		cosmic

3020-3021	debug daq for DAC values and HV, trash

=====================================================================

GOOD DATA STARTED ......

=====================================================================

For all runs before 3022, slot 7 and slot 8 FADC250_DAC are 3300 for all channels. Therefore some channels might not see signal.

20220629 16:20

HV slot  2:  900  950  900 1000 1000 1000 1000

HV slot 10: 1600 1600 1850 1750 1000 1100 1800 1680 1920 1800

slot 8 FADC250_DAC 3000 

slot 8 FADC250_DAC 3300 3000 3300 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 

3022    First production run  <-----------------

3023    DAQ crashed

3024    production

3025    debug run, cosmic, trash

=====================================================================

Cherenkov ch12 (started from 0) has cabling issue for runs before 3026

=====================================================================

Change FADC DAC for Ecal channels

slot 8  FADC250_DAC 3300 3000 3300 3000 3000 3000 3000 3000 3000 3000 3300 3300 3300 3000 3300 3000 

3026    production, cosmic at the first 4 hours(~30 events), see beam around 6 pm

3027	production

3028    production  

3029 	production, no beam at the beginning (several hours)

3030	production

3031	production

3032 	production

3033 	production

3034 	production

3035 	production

3036 	production

3037 	production, daq machine tunl11 has some issue and vncserver crashed, so coda also crashed

3038 	production, first test run after rebooting tunl11 and sbsvme22, data is good

3039 	production, test auto log scripts, data is good

3040 	production 

3041    cosmic, trash

3042 	debug daq,trash

3043    no files, daq crashed

FADC config file changed:  

1) remove slot 9

2) slot 7

FADC250_ALLCH_DAC 3205 3170 3170 3195 3195 3190 3200 3195 3180 3205 3190 3215 3170 3215 3175 3205

3)slot 8

FADC250_W_WIDTH 400

FADC250_ALLCH_DAC 3500 3200 3460 3190 3220 3210 3190 3220 3220 3190 3500 3520 3510 3500 3490 3450

3044 	cosmic, slot 8 FADC250_W_WIDTH 400

3045 	cosmic, slot 8 FADC250_W_WIDTH 400

changed slot 7 FADC250_W_WIDTH from 200 to 400

3046 	both slot 7 and slot 8, FADC250_W_WIDTH = 400

3047	production

3048	production

3049    1 event only, cosmic, end it for changing config file

::::::::::::::::::::::::GOOD DATA START:::::::::::::::::::::::

==============================================================

for both slot #7 and #8, changed to the following 2 lines:

FADC250_W_OFFSET 1000

FADC250_W_WIDTH 1000

3050	debug fadc config file,FADC250_W_OFFSET=1000 and FADC250_W_WIDTH=1000

3051	debug fadc config file,FADC250_W_OFFSET=1000 and FADC250_W_WIDTH=1000

==============================================================

for both slot #7 and #8, changed to the following 2 lines:

FADC250_W_OFFSET 1060

FADC250_W_WIDTH 400

3052	debug fadc config file,FADC250_W_OFFSET=1060 and FADC250_W_WIDTH=400

3053    production

3054    production

==============================================================

HV changed

Slot 2

Name: Shower_L(SDU#4), Shower_R(THU#2), Shower_T(SDU#5), CherA, CherB, CherC, CherD

HV: 950 980 900 1000 1000 1000 1000

Slot 10

Name: SC0_T, SC0_B, SC1_T, SC1_B, LASPD_T, LASPD_B, SPD, Preshower_L(SDU#1), Preshower_R(THU#1), Preshower_T(SDU#2)

HV: 1600 1600 1750 1750 900 1000 1950 1580 1750 1750

3055    HV tripped, empty,trash

3056    production

3057    production

================================================================

HV changed

Slot 2

Name: Shower_L(SDU#4), Shower_R(THU#2), Shower_T(SDU#5), CherA, CherB, CherC, CherD

HV: 1000 1030 900 1000 1000 1000 1000

Slot 10

Name: SC0_T, SC0_B, SC1_T, SC1_B, LASPD_T, LASPD_B, SPD, Preshower_L(SDU#1), Preshower_R(THU#1), Preshower_T(SDU#2)

HV: 1600 1600 1750 1750 880 1000 1950 1550 1800 1750

3058    production

3059    production

3060    production

3061    production

3062    production

3063    cosmic, 6 events

3064    production

3065    production

3066    production

3067    production

3068    production

3069    production

3070    production

3071    production

3072    production

3073    production

3074    production

3075    production

3076    production

3077    production

3078    production

3079    pulse trigger

3080    pulse trigger

3081    pulse trigger

3082    pulse trigger

3083-3084 trash, no data file

3085    debug daq

3086    production

3087    production