Hallc beamtest runlist » History » Revision 4
Revision 3 (Jixie Zhang, 07/21/2022 04:08 PM) → Revision 4/9 (Jixie Zhang, 07/21/2022 04:09 PM)
h1. Hallc beamtest runlist #This file record the run list for solid ecal beamtest in HallC. #Do not delete slot 7 FADC250_DAC 3300 (for all 16 channels) slot 8 FADC250_DAC 3300 (for all 16 channels) 20220620 21:30 HV slot 2: 0 0 0 0 0 0 0 HV slot 10: 1500 1500 1500 1500 0 0 0 0 0 0 0 2925 FADC only 2926 FADC only 2927 FADC only 2928 FADC only 2929 FADC only File not exist for run 2930-2949, debug DAQ 20220621 12:20 HV slot 2: 900 950 900 0 0 0 0 HV slot 10: 1500 1500 1500 1500 1500 1500 1500 1800 1800 1800 2950-2956 SSP only 2957 SSP only, trash 2958 debug DAQ, trash 2959 First run for FADC+SSP, good data 2960 good FADC+SSP data 2961-2964 DEBUG SSP, all trash 20220623 15:50 HV slot 2: 900 950 900 1500 1500 1500 1500 HV slot 10: 1600 1600 1700 1600 1500 1500 1500 1800 1800 1800 From this run, trigger lost due to FIFO has an 100mv offset 2965-2968 SSP only, no trigger and debug daq, trash 2969 FADC+SSP, no trigger, trash 2970 cosmic run, no trigger, trash 2971 beam run, no trigger, trash From run 2972, trigger is connected to another FIFO unit which has 0 offset 20220624 12:20 HV slot 2: 900 950 900 1000 1000 1000 1000 HV slot 10: 1600 1600 1700 1600 1500 1500 1500 1800 1800 1800 2972 debug DAQ, trash 2973 good FADC+SSP data <------- First run for good Cherenkov HV 2974 2975 trash 2976-2981 good FADC+SSP data 2982 trash 2983-3002 good FADC+SSP data 3003-3005 debug DAQ, trash 3006-3013 good FADC+SSP data 3014-3015 cosmic 3016 daq crash, no output files 3017-3018 debug daq, trash 3019 cosmic 3020-3021 debug daq for DAC values and HV, trash ===================================================================== GOOD DATA STARTED ...... ===================================================================== For all runs before 3022, slot 7 and slot 8 FADC250_DAC are 3300 for all channels. Therefore some channels might not see signal. 20220629 16:20 HV slot 2: 900 950 900 1000 1000 1000 1000 HV slot 10: 1600 1600 1850 1750 1000 1100 1800 1680 1920 1800 slot 8 FADC250_DAC 3000 slot 8 FADC250_DAC 3300 3000 3300 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3022 First production run <----------------- 3023 DAQ crashed 3024 production 3025 debug run, cosmic, trash ===================================================================== Cherenkov ch12 (started from 0) has cabling issue for runs before 3026 ===================================================================== Change FADC DAC for Ecal channels slot 8 FADC250_DAC 3300 3000 3300 3000 3000 3000 3000 3000 3000 3000 3300 3300 3300 3000 3300 3000 3026 production, cosmic at the first 4 hours(~30 events), see beam around 6 pm 3027 production 3028 production 3029 production, no beam at the beginning (several hours) 3030 production 3031 production 3032 production 3033 production 3034 production 3035 production 3036 production 3037 production, daq machine tunl11 has some issue and vncserver crashed, so coda also crashed 3038 production, first test run after rebooting tunl11 and sbsvme22, data is good 3039 production, test auto log scripts, data is good 3040 production 3041 cosmic, trash 3042 debug daq,trash 3043 no files, daq crashed FADC config file changed: 1) remove slot 9 2) slot 7 FADC250_ALLCH_DAC 3205 3170 3170 3195 3195 3190 3200 3195 3180 3205 3190 3215 3170 3215 3175 3205 3)slot 8 FADC250_W_WIDTH 400 FADC250_ALLCH_DAC 3500 3200 3460 3190 3220 3210 3190 3220 3220 3190 3500 3520 3510 3500 3490 3450 3044 cosmic, slot 8 FADC250_W_WIDTH 400 3045 cosmic, slot 8 FADC250_W_WIDTH 400 changed slot 7 FADC250_W_WIDTH from 200 to 400 3046 both slot 7 and slot 8, FADC250_W_WIDTH = 400 3047 production 3048 production 3049 1 event only, cosmic, end it for changing config file ::::::::::::::::::::::::GOOD DATA START::::::::::::::::::::::: ============================================================== For both slot #7 and #8, changed to the following 2 lines: FADC250_W_OFFSET 1000 FADC250_W_WIDTH 1000 3050 debug fadc config file,FADC250_W_OFFSET=1000 and FADC250_W_WIDTH=1000 3051 debug fadc config file,FADC250_W_OFFSET=1000 and FADC250_W_WIDTH=1000 ============================================================== for both slot #7 and #8, changed to the following 2 lines: FADC250_W_OFFSET 1060 FADC250_W_WIDTH 400 3052 debug fadc config file,FADC250_W_OFFSET=1060 and FADC250_W_WIDTH=400 3053 production 3054 production ============================================================== HV changed Slot 2 Name: Shower_L(SDU#4), Shower_R(THU#2), Shower_T(SDU#5), CherA, CherB, CherC, CherD HV: 950 980 900 1000 1000 1000 1000 Slot 10 Name: SC0_T, SC0_B, SC1_T, SC1_B, LASPD_T, LASPD_B, SPD, Preshower_L(SDU#1), Preshower_R(THU#1), Preshower_T(SDU#2) HV: 1600 1600 1750 1750 900 1000 1950 1580 1750 1750 3055 HV tripped, empty,trash 3056 production 3057 production ================================================================ HV changed Slot 2 Name: Shower_L(SDU#4), Shower_R(THU#2), Shower_T(SDU#5), CherA, CherB, CherC, CherD HV: 1000 1030 900 1000 1000 1000 1000 Slot 10 Name: SC0_T, SC0_B, SC1_T, SC1_B, LASPD_T, LASPD_B, SPD, Preshower_L(SDU#1), Preshower_R(THU#1), Preshower_T(SDU#2) HV: 1600 1600 1750 1750 880 1000 1950 1550 1800 1750 3058 production 3059 production 3060 production 3061 production 3062 production 3063 cosmic, 6 events 3064 production 3065 production 3066 production 3067 production 3068 production 3069 production 3070 production 3071 production 3072 production 3073 production 3074 production 3075 production 3076 production 3077 production 3078 production 3079 pulse trigger 3080 pulse trigger 3081 pulse trigger 3082 pulse trigger 3083-3084 trash, no data file 3085 debug daq 3086 production 3087 production