Run List » History » Revision 45
« Previous |
Revision 45/176
(diff)
| Next »
Simona Malace, 07/26/2020 07:10 PM
Run List2 - after the Covid shutdown¶
Calibration runs in prep for taking data at high rate
Run 185: Pulser run to look at MaPMT vtpPulser
Run 188: Cosmic run to look at Calo vtpScaler. Trigger in VTP is Calo only. Bad calo 6-3 is all triggers.
Run 189: Cosmic run to look at Calo vtpScaler. Trigger in VTP is Calo only. Bad calo 6-3 is all triggers.
Run 190: Cosmic run to look at Calo vtpScaler. Trigger in VTP is Calo only. Bad calo 6-3 is all triggers.
Run 202: cosmic run. Calo preamp. All Hv 1200
Run 205: cosmic run. Calo preamp. All Hv 1200, except 9-1,9-2 HV1100
Run 206: maPMT checks -pulser trigger
Run 207: maPMT checks -pulser trigger
Run 208: maPMT checks -pulser trigger - after taking new PEDs
Run 209: maPMT checks -pulser trigger - after taking new PEDs
Run 210: comsics; triggering on calo only
Run 211: maPMT checks -pulser trigger - after taking new PEDs; Cher th at 17 instead of 20
Run 212: maPMT checks -pulser trigger - after taking new PEDs; Cher th at 17 instead of 20
Run 213: maPMT checks -pulser trigger - after taking new PEDs; Cher th at 17 (except for 32 which is at 18) instead of 20; increased HV for 44 from 1085 to 1095 V
Run 213: maPMT checks -pulser trigger - after taking new PEDs; Cher th at 17 (except for 32 which is at 19) instead of 20;
Run 215: Calo gain matching (vtpScalers)
Run 216: Calo gain matching (vtpScalers)
Run 218: Calo gain matching (vtpScalers)
Run 219: Calo gain matching (vtpScalers)
Run 220: Calo gain matching (vtpScalers)
Run 222: Calo gain matching (vtpScalers)
Run 223: Calo gain matching (vtpScalers)
Run 224: Calo gain matching (vtpScalers)
Run 225: Calo gain matching (vtpScalers)
Run List PreCovid¶
MODE 3 Runs - Nitrogen; all detector channels ON; Cher channels with zero FADC threshold; 3-fold coin
Run 54: short run to test the analyzer
Run 55: done
Run 59: done
MODE 3 Runs - CO2; all detector channels ON - 3-fold coin
Run 63: short to test DAQ/Trigger - calo threshold at 10 channels; scin threshold at 120 channels; Cher threshold at zero
Run 64: test DAQ/Trigger - calo threshold at 10 channels; scin threshold at 120 channels; Cher threshold at zero
Run 65: test DAQ/Trigger - calo threshold at 40 channels; scin threshold at 120 channels; Cher threshold at 20 channels
Run 66: Same as run 65.
Run 67: adjusted Calorimeter HVs
Run 68: adjusted Calorimeter HVs
MODE 1 Runs - CO2; all detector channels ON - 3-fold coin
Run 69: to test Chao's code
MODE 3 Beam Scintillator Gain matching
Run 113, 114: changed the scin TH from 120 to 160
Run 115, 116: changed the scin TH from 160 to 210
Run 117: changed the scin TH from 210 to 250
Run 132: S2 and Calo trigger, scin TH = 200, Cher TH = 20, Calo TH = 40
Run 134: Calo trigger, scin TH = 200, Cher TH = 20, Calo TH = 40
MODE 3 Beam Calorimeter Gain matching
Run 135: Calo HV 4: 1775V, 5-1: 1800, 5-2: 1800, 5-3: 1900, 5-4:1800, 6-2:1800, 7-2:1775, 8-3: 1800, 8-4:1875, 9-1: 1800, 9-4:1850
Run 136: Calo HV 4: 1825V, 5-1: 1850, 5-2: 1850, 5-3: 1950, 5-4:1850, 7-2:18255, 9-2: 1600, 9-4:1900
Run 137: Calo HV 5-3: 2000, 8-4: 1925, 9-4:1950
Run 138: Calo HV 5-3: 2000, 8-4: 1925, 9-4:1950
Run 139: changed SUM_THR =3 ( SUM_THR is threshold on the CALO trigger)
Run 140: changed SUM_THR =10
Run 141: changed individual calo thresholds from 40 to 80
Run 142: Calo HV 1:1750, 2:1825, 3:1800, 4:1875
Run 143: Add S2 plane to the VTP trigger ( before just calo), changed individual calo thresholds from 80 to 120
Run 144: same as 143
Run 145: same as 143
Run 146: same as 143
Run 147: same as 143
Run 148: changed individual calo thresholds from 120 to 150
Run 149: mistakenly changed calo thresholds 8-1,2,3,4 and 9-1,2,3,4 from 150 to 100
Run 150: changed time window from 768 to 200ns
Run 151: same as 150
Run 152: put calo thresholds 8-1,2,3,4 and 9-1,2,3,4 back to 150, set threshold for 1,2,3,4,5-1,-2,-3,-4 from 150 to 100
MODE 3 Beam golden Runs - CO2; all detector channels ON - S2 + calo (after calorimeter gain matching)
Run 153: same as 152
Run 154: same as 152
Run 155: Calo HV 6-1: 1725V, 6-3: 1650V, 7-3: 1800V, 9-2: 1500V
Run 156: Calo HV 6-1: 1625V, 6-4: 1625V, 7-3: 1760V, 8-2: 1725V
Run 157: Calo HV 6-1: 1625V, 6-4: 1625V, 7-3: 1760V, 8-2: 1725V
Run 159: same as 157, steady 30uA on C-OPTICS
Run 161: 30uA on Pol-He3 cell. Use same scaler data as run 160.
MODE 1 Beam golden Runs - CO2; all detector channels ON - S2 + calo (after calorimeter gain matching)
Run 158: 30uA on multi-foil carbon target, Steve Wood took scaler rates before the run
Run 160: 30uA on PolHe3 target, took scaler rates before this run
Updated by Simona Malace about 5 years ago · 45 revisions