SoLID DAQ » Telescope Cerenkov

h1. Wiki

h1. DAQ

h2. Starting CODA

DAQ is running on simonadaq computer in coda account in the vnc session number 1.

To open VNC, either start VNC from a computer at the counting house through ssh or make a ssh tunnel if you are offsite

Example :

   ssh -L5901:locahost:portnumber username@hallgw.jlab.org     ( use a port number not in used on hallgw and there are some limitation on the port range I think between 10000 and 30000 should be ok)

after from hallgw

   ssh -Lportnumber:localhost:5901 cdaq@simonadaq 

then open a vnc locally on your computer : vncviewer -shared localhost:1 ( ask Junqi or Sylvester for the vnc password )

To start CODA from scratch, login as coda

type startcoda

that will open the CODA windows

If the ROC is not started alread, ssh root@hallcsc-1 and type ./startroc1

in Run Control GUI, go to platform and connect.

Then choose the FADC configuration and just start a run.

To change the FADC parameters,

ssh to hallcsc-1 as root

go to /root/linuxvme/fadc/rol

and edit fadc_list.c

once done compile with :

 make fadc_list.so

and redownload in CODA to take the changes into account

I saw from time to time error in FADC ROC window about scanmask, usually stopping the run and redownloading fixes the issue.

h2. Powercycling the crate 

 telnet  129.57.168.242 2003

 type CAEN

and a menu should appear

     C.A.E.N.  A8160 VME8100 Crate Controller    V1.05     

     B O A R D   M E N U 

     Crate           PS & Fan Status   

     General         General Status    

     Update          PS Firmware Update

     Quit            Abandon program

Type C

and then you will see fan status and you can turn the crate on or off with O

h2. Channel Map

|_.FADC 1 (slot 6) (1V max range) |_.detector|

| 0    |   Scint 1       |

| 1    |   Cer       |

| 2    |          |

| 3    |   Scint 1       |

| 4    |   Cer       |

| 5    |          |

| 6    |   Scint 1       |

| 7    |   Cer       |

| 8    |          |

| 9    |   Scint 1       |

| 10    |   Cer       |

| 11    |          |

| 12   |   Scint 1       |

| 13   |   Cer       |

| 14   |          |

| 15   |   Scint 1       |

|_.FADC 2 (slot 7) 2V max range |_.detector|

| 0    |   Scint 1       |

| 1    |   Cer       |

| 2    |          |

| 3    |   Scint 1       |

| 4    |   Cer       |

| 5    |          |

| 6    |   Scint 1       |

| 7    |   Cer       |

| 8    |          |

| 9    |   Scint 1       |

| 10    |   Cer       |

| 11    |          |

| 12   |   Scint 1       |

| 13   |   Cer       |

| 14   |          |

| 15   |   Scint 1       |

h1. FADC data analysis

on cdaq account

go to /home/cdaq/tlgc/FADC_decode

and run FADCcom program

you need to copy the CODA file from simonadaq to /net/cdaq/cdaql1data/cdaq/tlgc/data ( from simonadaq : scp fadc_runnumber.dat cdaq@cdaql2:tlgc/data/ )

if you open the rootfile you will see the different directories corresponding to the channels decoded.

h1. HV

h2. Access HV crate.

*The HV crate can be remotely accessed through the port server port 2002 to access the port: telnet  129.57.168.242 2002

*To end a telnet session type:"CTRL-]" then quit

*If someone else is connected to the 2002 if you get :

<pre>

   Trying 129.57.168.242...

telnet: connect to address 129.57.168.242: Connection refused

</pre>

*To force a connect you must first kill the 2002 connection by the following steps:

> # telnet  129.57.168.242 ( login: root password:dbps)

> # at "#>" prompt type: kill tty=2

> #  at "#>" prompt type: "CTRL-]" then quit

*press the "U" ( for update) if  you see the following:

<pre>

16:40:40 104% telnet 129.57.168.242 2002

Trying 129.57.168.242...

Connected to 129.57.168.242.

Escape character is '^]'.

Digi International 

PortServer 8

</pre> 

*Press "D" if you see the main menu

<pre>

**************

      M A I N   M E N U

      Display             Display/Modify channels

      Protections         Set/Reset password

      Crate               Connect a new crate

      Map                 Crate map

      Kill                Kill all channels

      Alarms              Reset alarms

      Status              Select type of alarm

      Format              Reformat EEPROM

      Quit                Abandon program

***********

</pre>

*You should eventually see (hitting "P" moves to different pages:

<pre>

Channel       Vmon     Imon    HVmax   V0set     I0set     Hv   Status   Ch#

 CHANNEL48    0000.00  0000.00  2321   1700.00   2000.00   Off             48

 CHANNEL49    0000.00  0000.00  2321   1700.00   2000.00   Off             49

 CHANNEL50    0000.00  0000.00  2321   1850.00   2000.00   Off             50

 CHANNEL51    0000.00  0000.00  2321   1700.00   2000.00   Off             51

 CHANNEL52    0000.00  0000.00  2321   1900.00   2000.00   Off             52

 CHANNEL53    0000.00  0000.00  2321   1900.00   2000.00   Off             53

 cerA         0000.00  0000.00  2321   1000.00   2000.00   Off             54

 cerB         0000.00  0000.00  2321   1000.00   2000.00   Off             55

 cerC         0000.00  0000.00  2321   1000.00   2000.00   Off             56

 cerD         0000.00  0000.00  2321   1000.00   2000.00   Off             57

 CHANNEL58    0000.00  0000.00  2321   0000.00   2000.00   Off             58

 CHANNEL59    0000.00  0000.00  2321   1000.00   2000.00   Off             59

 calo2        1653.40  0880.00  2321   1650.00   2000.00    On             60

 calo3        1653.60  0913.00  2321   1650.00   2000.00    On             61

 calo4        1553.20  0849.00  2321   1550.00   2000.00    On             62

 calo5        1453.20  0790.00  2321   1450.00   2000.00    On             63

or

Channel       Vmon     Imon    HVmax   V0set     I0set     Hv   Status   Ch#

 chan16       0000.00  0000.00  1048   0200.00   1000.00   Off             16

 scinF        0847.80  0213.00  1048   0850.00   1000.00    On             17

 scinB        0847.40  0216.00  1048   0850.00   1000.00    On             18

 CHANNEL19    0000.00  0000.00  1048   0200.00   1000.00   Off             19

 CHANNEL20    0000.00  0000.00  1048   0200.00   1000.00   Off             20

 CHANNEL21    0000.00  0000.00  1048   0200.00   1000.00   Off             21

 CHANNEL22    0000.00  0000.00  1048   0200.00   1000.00   Off             22

 CHANNEL23    0000.00  0000.00  1048   0200.00   1000.00   Off             23

 CHANNEL24    0023.40  0000.00  1048   0200.00   0800.00   Off             24

 CHANNEL25    0000.00  0000.00  1048   0200.00   0800.00   Off             25

 CHANNEL26    0000.00  0000.00  1048   0200.00   0800.00   Off             26

 CHANNEL27    0000.00  0000.00  1048   0200.00   0800.00   Off             27

 CHANNEL28    0000.00  0000.00  1048   0200.00   0800.00   Off             28

 CHANNEL29    0000.00  0000.00  1048   0200.00   0800.00   Off             29

 CHANNEL30    0000.00  0000.00  1048   0200.00   0800.00   Off             30

 CHANNEL31    0000.00  0000.00  1048   0200.00   0800.00   Off             31

</pre>