Wiki » History » Version 29
Mark Jones, 02/25/2020 06:11 PM
1 | 1 | Alexandre Camsonne | h1. Wiki |
---|---|---|---|
2 | |||
3 | 27 | Alexandre Camsonne | h1. [[ESB DAQ]] |
4 | 26 | Alexandre Camsonne | |
5 | 24 | Alexandre Camsonne | h1. Cerenkov folder |
6 | |||
7 | 29 | Mark Jones | h1. [[Gas System]] |
8 | |||
9 | 24 | Alexandre Camsonne | [https://jeffersonlab-my.sharepoint.com/:f:/g/personal/jones_jlab_org/EsWpGHZPv6NJhRX3pkQMAakBZS25S1sDGxotQzKblVM3tA?e=5%3asbAMA1&at=9] |
10 | |||
11 | |||
12 | 28 | Mark Jones | I think that most of the stuff below is outdated. (MKJones Feb 25, 2020). |
13 | |||
14 | 1 | Alexandre Camsonne | h1. DAQ |
15 | |||
16 | 4 | Alexandre Camsonne | |
17 | h2. Starting CODA |
||
18 | 1 | Alexandre Camsonne | DAQ is running on simonadaq computer in coda account in the vnc session number 1. |
19 | |||
20 | To open VNC, either start VNC from a computer at the counting house through ssh or make a ssh tunnel if you are offsite |
||
21 | |||
22 | Example : |
||
23 | |||
24 | 9 | Alexandre Camsonne | ssh -L5901:locahost:portnumber username@hallgw.jlab.org ( use a port number not in used on hallgw and there are some limitation on the port range I think between 10000 and 30000 should be ok) |
25 | 1 | Alexandre Camsonne | |
26 | after from hallgw |
||
27 | |||
28 | 9 | Alexandre Camsonne | ssh -Lportnumber:localhost:5901 cdaq@simonadaq |
29 | 1 | Alexandre Camsonne | |
30 | then open a vnc locally on your computer : vncviewer -shared localhost:1 ( ask Junqi or Sylvester for the vnc password ) |
||
31 | |||
32 | To start CODA from scratch, login as coda |
||
33 | |||
34 | type startcoda |
||
35 | |||
36 | that will open the CODA windows |
||
37 | |||
38 | 3 | Alexandre Camsonne | If the ROC is not started alread, ssh root@hallcsc-1 and type ./startroc1 |
39 | |||
40 | 2 | Alexandre Camsonne | in Run Control GUI, go to platform and connect. |
41 | 1 | Alexandre Camsonne | |
42 | 2 | Alexandre Camsonne | Then choose the FADC configuration and just start a run. |
43 | 1 | Alexandre Camsonne | |
44 | 2 | Alexandre Camsonne | To change the FADC parameters, |
45 | |||
46 | ssh to hallcsc-1 as root |
||
47 | |||
48 | go to /root/linuxvme/fadc/rol |
||
49 | |||
50 | and edit fadc_list.c |
||
51 | |||
52 | once done compile with : |
||
53 | |||
54 | make fadc_list.so |
||
55 | |||
56 | and redownload in CODA to take the changes into account |
||
57 | 4 | Alexandre Camsonne | |
58 | |||
59 | 7 | Alexandre Camsonne | I saw from time to time error in FADC ROC window about scanmask, usually stopping the run and redownloading fixes the issue. |
60 | |||
61 | 25 | Alexandre Camsonne | h2. Scalers |
62 | |||
63 | To start the scaler server : |
||
64 | |||
65 | go in scaler_server dirextory |
||
66 | |||
67 | |||
68 | launch |
||
69 | scaSrvrLinux |
||
70 | |||
71 | and after |
||
72 | |||
73 | |||
74 | |||
75 | |||
76 | |||
77 | |||
78 | |||
79 | 7 | Alexandre Camsonne | h2. Powercycling the crate |
80 | |||
81 | telnet 129.57.168.242 2003 |
||
82 | |||
83 | type CAEN |
||
84 | |||
85 | and a menu should appear |
||
86 | |||
87 | C.A.E.N. A8160 VME8100 Crate Controller V1.05 |
||
88 | |||
89 | B O A R D M E N U |
||
90 | |||
91 | Crate PS & Fan Status |
||
92 | General General Status |
||
93 | Update PS Firmware Update |
||
94 | |||
95 | |||
96 | Quit Abandon program |
||
97 | |||
98 | Type C |
||
99 | |||
100 | and then you will see fan status and you can turn the crate on or off with O |
||
101 | |||
102 | 23 | Alexandre Camsonne | h2. Channel Map (update on Mar 20th for new MPC) |
103 | 3 | Alexandre Camsonne | |
104 | 22 | Alexandre Camsonne | VME address 0x7000000 |
105 | 3 | Alexandre Camsonne | |
106 | 21 | Mark Jones | |_.FADC 1 (slot 6) (1V max range) |_.detector| |
107 | 23 | Alexandre Camsonne | | 0 | Cer 1L | |
108 | | 1 | Cer 2L | |
||
109 | | 2 | Cer 3L | |
||
110 | | 3 | Not used | |
||
111 | | 4 | Cer 4L | |
||
112 | | 5 | Cer 5L | |
||
113 | | 6 | Cer 6L | |
||
114 | | 7 | Not used | |
||
115 | | 8 | Cer 1R | |
||
116 | | 9 | Cer 2R | |
||
117 | | 10 | Cer 3R | |
||
118 | | 11 | Not used | |
||
119 | | 12 | Cer 4R | |
||
120 | | 13 | Cer 5R | |
||
121 | | 14 | Cer 6R | |
||
122 | | 15 | Not used | |
||
123 | 22 | Alexandre Camsonne | |
124 | |||
125 | VME address 0x7800000 |
||
126 | |||
127 | 1 | Alexandre Camsonne | |
128 | 21 | Mark Jones | |_.FADC 2 (slot 7) 2V max range |_.detector| |
129 | 23 | Alexandre Camsonne | | 0 | Calo 2 | |
130 | | 1 | Calo 3 | |
||
131 | | 2 | Calo 4 | |
||
132 | | 3 | Calo 5 | |
||
133 | | 4 | Calo sum | |
||
134 | | 5 | Not used | |
||
135 | | 6 | Not used | |
||
136 | | 7 | LED | |
||
137 | | 8 | Not used | |
||
138 | | 9 | Not used | |
||
139 | | 10 | Not used | |
||
140 | | 11 | Reference time | |
||
141 | | 12 | Scint bottom right | |
||
142 | | 13 | Scint bottom left | |
||
143 | | 14 | Scint top right | |
||
144 | | 15 | Scint top Left | |
||
145 | 2 | Alexandre Camsonne | |
146 | 1 | Alexandre Camsonne | h1. FADC data analysis |
147 | |||
148 | 2 | Alexandre Camsonne | |
149 | 1 | Alexandre Camsonne | on cdaq account |
150 | |||
151 | 2 | Alexandre Camsonne | go to /home/cdaq/tlgc/FADC_decode |
152 | |||
153 | and run FADCcom program |
||
154 | |||
155 | you need to copy the CODA file from simonadaq to /net/cdaq/cdaql1data/cdaq/tlgc/data ( from simonadaq : scp fadc_runnumber.dat cdaq@cdaql2:tlgc/data/ ) |
||
156 | |||
157 | |||
158 | if you open the rootfile you will see the different directories corresponding to the channels decoded. |
||
159 | 6 | Mark Jones | |
160 | |||
161 | h1. HV |
||
162 | |||
163 | h2. Access HV crate. |
||
164 | *The HV crate can be remotely accessed through the port server port 2002 to access the port: telnet 129.57.168.242 2002 |
||
165 | *To end a telnet session type:"CTRL-]" then quit |
||
166 | *If someone else is connected to the 2002 if you get : |
||
167 | <pre> |
||
168 | Trying 129.57.168.242... |
||
169 | telnet: connect to address 129.57.168.242: Connection refused |
||
170 | </pre> |
||
171 | |||
172 | *To force a connect you must first kill the 2002 connection by the following steps: |
||
173 | > # telnet 129.57.168.242 ( login: root password:dbps) |
||
174 | > # at "#>" prompt type: kill tty=2 |
||
175 | > # at "#>" prompt type: "CTRL-]" then quit |
||
176 | |||
177 | *press the "U" ( for update) if you see the following: |
||
178 | |||
179 | <pre> |
||
180 | 16:40:40 104% telnet 129.57.168.242 2002 |
||
181 | Trying 129.57.168.242... |
||
182 | Connected to 129.57.168.242. |
||
183 | Escape character is '^]'. |
||
184 | |||
185 | Digi International |
||
186 | PortServer 8 |
||
187 | </pre> |
||
188 | |||
189 | |||
190 | *Press "D" if you see the main menu |
||
191 | <pre> |
||
192 | ************** |
||
193 | M A I N M E N U |
||
194 | |||
195 | Display Display/Modify channels |
||
196 | Protections Set/Reset password |
||
197 | Crate Connect a new crate |
||
198 | Map Crate map |
||
199 | Kill Kill all channels |
||
200 | Alarms Reset alarms |
||
201 | Status Select type of alarm |
||
202 | Format Reformat EEPROM |
||
203 | Quit Abandon program |
||
204 | *********** |
||
205 | </pre> |
||
206 | |||
207 | *You should eventually see (hitting "P" moves to different pages: |
||
208 | <pre> |
||
209 | |||
210 | Channel Vmon Imon HVmax V0set I0set Hv Status Ch# |
||
211 | CHANNEL48 0000.00 0000.00 2321 1700.00 2000.00 Off 48 |
||
212 | CHANNEL49 0000.00 0000.00 2321 1700.00 2000.00 Off 49 |
||
213 | CHANNEL50 0000.00 0000.00 2321 1850.00 2000.00 Off 50 |
||
214 | CHANNEL51 0000.00 0000.00 2321 1700.00 2000.00 Off 51 |
||
215 | CHANNEL52 0000.00 0000.00 2321 1900.00 2000.00 Off 52 |
||
216 | CHANNEL53 0000.00 0000.00 2321 1900.00 2000.00 Off 53 |
||
217 | cerA 0000.00 0000.00 2321 1000.00 2000.00 Off 54 |
||
218 | cerB 0000.00 0000.00 2321 1000.00 2000.00 Off 55 |
||
219 | cerC 0000.00 0000.00 2321 1000.00 2000.00 Off 56 |
||
220 | cerD 0000.00 0000.00 2321 1000.00 2000.00 Off 57 |
||
221 | CHANNEL58 0000.00 0000.00 2321 0000.00 2000.00 Off 58 |
||
222 | CHANNEL59 0000.00 0000.00 2321 1000.00 2000.00 Off 59 |
||
223 | calo2 1653.40 0880.00 2321 1650.00 2000.00 On 60 |
||
224 | calo3 1653.60 0913.00 2321 1650.00 2000.00 On 61 |
||
225 | calo4 1553.20 0849.00 2321 1550.00 2000.00 On 62 |
||
226 | calo5 1453.20 0790.00 2321 1450.00 2000.00 On 63 |
||
227 | |||
228 | or |
||
229 | Channel Vmon Imon HVmax V0set I0set Hv Status Ch# |
||
230 | chan16 0000.00 0000.00 1048 0200.00 1000.00 Off 16 |
||
231 | scinF 0847.80 0213.00 1048 0850.00 1000.00 On 17 |
||
232 | scinB 0847.40 0216.00 1048 0850.00 1000.00 On 18 |
||
233 | CHANNEL19 0000.00 0000.00 1048 0200.00 1000.00 Off 19 |
||
234 | CHANNEL20 0000.00 0000.00 1048 0200.00 1000.00 Off 20 |
||
235 | CHANNEL21 0000.00 0000.00 1048 0200.00 1000.00 Off 21 |
||
236 | CHANNEL22 0000.00 0000.00 1048 0200.00 1000.00 Off 22 |
||
237 | CHANNEL23 0000.00 0000.00 1048 0200.00 1000.00 Off 23 |
||
238 | CHANNEL24 0023.40 0000.00 1048 0200.00 0800.00 Off 24 |
||
239 | CHANNEL25 0000.00 0000.00 1048 0200.00 0800.00 Off 25 |
||
240 | CHANNEL26 0000.00 0000.00 1048 0200.00 0800.00 Off 26 |
||
241 | CHANNEL27 0000.00 0000.00 1048 0200.00 0800.00 Off 27 |
||
242 | CHANNEL28 0000.00 0000.00 1048 0200.00 0800.00 Off 28 |
||
243 | CHANNEL29 0000.00 0000.00 1048 0200.00 0800.00 Off 29 |
||
244 | CHANNEL30 0000.00 0000.00 1048 0200.00 0800.00 Off 30 |
||
245 | CHANNEL31 0000.00 0000.00 1048 0200.00 0800.00 Off 31 |
||
246 | |||
247 | </pre> |