Actions
Feature #618
openRe-configure F1 clock to use TI clock
Status:
New
Priority:
Normal
Assignee:
-
Start date:
03/29/2021
Due date:
% Done:
0%
Estimated time:
Description
Notes from Bryan Moffit:
I took at look at what you need to connect the TI 31.25MHz clock to the F1 FrontPanel SD.
There's some TI switches that need to be set. They're near the top of the module, if you're looking at the PCB with the VME connectors on the right:
(See Attachment #1 - TI TDC Switches).
The TDC connector on the TI has these pin outs. Those 4 signals need connected to the f1 front panel SD ( See Attachment #2 - TI TDC Table)
You'll connect the clock to Connector A (14,13) and the rest of the signals to/from connector B on the F1 front panel SD. (See Attachment #3 F1v1 TDC Input Output Table).
Files
| TI_TDC_switches.png (108 KB) TI_TDC_switches.png | TI TDC Switches | ||
| TI_TDC.png (42.6 KB) TI_TDC.png | TI TDC Table | ||
| f1tdc_fpsd.png (67.1 KB) f1tdc_fpsd.png | F1v1 TDC Input Output Table |
No data to display
Actions