Project

General

Profile

Pion LT Software Meetings » History » Version 18

Stephen Kay, 03/08/2021 02:53 PM

1 1 Stephen Kay
{{>TOC}}
2
3
h1. Pion LT Software Meetings
4
5
Pion LT software meetings. Please add your talk to the meeting ahead of time. Add the newest meeting to the top of the list!
6 17 Stephen Kay
7
----
8
9 18 Stephen Kay
h2. 2021.03.08 PionLT Software Meeting
10
11
* HeeP studies discussion
12
** Discussed minimal criteria for singles runs
13
*** No setting shorter than 12 minutes
14
*** No setting longer than one hour
15
*** No setting with less than 10k events
16
*** Want elastics rates of under 100 kHz
17
** Criteria/Discussion for coin runs
18
*** Want roughly 50k elastics
19
*** Multiple would be good
20
*** ~3 hours for one previous setting (at 50% data taking eff), this is OK
21
** Discussed solid angles for each spectrometer
22
*** HMS - 8 mSr, 8.1? 
23
*** SHMS - 3.5 mSr, Carlos states > 4 mSr in his thesis
24
** Both Nathan and Jacob had some spreadsheets with settings analysed, a few numbers did not match previous settings, both looking into this (probably a solid angle off or similar)
25
** Garth sent on Fortran code for cross sections
26
* Analysis Code Updates
27
** Stephen has finalised the pathing/directory structure updates for
28
*** hallc_replay_lt
29
*** UTIL_PION
30
*** UTIL_BATCH
31
** All have a new branch, *offline_pionlt*
32
** Further testing and updates needed, Stephen will work through updating the scripts for the calibrations now that the new structure is set up
33
*** Some are outdated now, DC, Hodoscopes e.t.c (grab wrong DB files to begin with)
34
* Numerous people reported that the farm was very slow over the weekend, if this continues, should raise with Brad/SciComp
35
36
----
37
38 17 Stephen Kay
h2. 2021.03.01 PionLT Software Meeting
39
40
* HeeP studies
41
** Students still working on this, Jacob looking at rate calculations
42
* Stephen - updates on new git and directory setup scripts
43
** Scripts in place but still some work on hallc_replay_lt and UTIL_BATCH needed
44
*** Issues with pathing that need to be corrected for new area
45
*** Should have these finalised by mid/late this week
46
** Jacob has tested and seems to be working OK
47
** Will work on updating/testing DC/Calorimeter calibration scripts next
48
* Jacob conducting sanity checks on new matrix elements, noticed discrepancy between kaonlt/pionlt hcana and previous versions, likely due to changes in hcana from April last year
49
** Mark gave some talk on this last year - "Talk1":https://hallcweb.jlab.org/DocDB/0010/001060/002/update_april2020.pdf , "Talk2":https://hallcweb.jlab.org/DocDB/0010/001055/001/HCANA_Hodo_changes_april2020.pdf, "Talk3":https://hallcweb.jlab.org/DocDB/0010/001056/001/April%202020%20HCANA%20changes%20for%20other%20detectors.pdf
50
* Meeting time discussed, remaining at 13:00 ET (which means it shifts to 11:00 Regina time)
51
 
52 16 Stephen Kay
----
53 1 Stephen Kay
54 16 Stephen Kay
h2. 2021.02.22 PionLT Software Meeting
55
56
* Updates from the group
57
** Garth
58
*** HeeP data discussion, one per beam energy
59
**** KaonLT and PionLT Phase I had nearly every beam energy setting
60
*** Updates about the new target config, phase II and III of PionLT likely going to have new target ladder
61
*** Thicker aluminium cans, CAD design done but not completely finalised, will know soon
62
*** KaonLT beamline will be used in 2021 run, new beamline for 2022 run
63
*** Start of run pushed back slightly, 2022 run will be May to December, PionLT might be slotted into parts of this
64
** Stephen
65
*** Demo2 script fixed, bug was slightly stupid, run not in range but the script did not report this
66
**** Will look at tweaks to kaonlt.py to fix this
67
*** New hcana installed in pionlt area, used root 6.14.04, scons issue with newer root (6.18.04)
68
*** Will create setup scripts for use in migrating over to this area for working
69
*** Minor issue with /cache/c-pionlt directory, permissions related
70
71
* Discussed plans and potential problems for upcoming run regarding COVID procedures, how many people can be on shift, how many people will travel and so on
72
* Will need to shift meeting time in a few weeks due to daylight savings time change for some people
73
74 1 Stephen Kay
----
75
76 14 Stephen Kay
h2. 2021.02.15 PionLT Software Meeting
77
78
* Updates from the group
79 15 Stephen Kay
** Carlos
80
*** Previously looked at optimisation of kinematics for HeeP data
81
*** Document on "DocDB":https://hallcweb.jlab.org/DocDB/0010/001036/002/HC_SoftwareMeeting_Oct03_2019_pdf.pdf
82
*** Will revisit this and try to make some notes on code
83
** Stephen
84
*** No major updates, resolved some issues with scripts Jacob/Junaid were having
85
*** /group/c-pionlt now exists, will try to install hcana here with a more up to date version of root
86
*** Garth mentioned some changes to farm software, cmake, singularity, Jupyter - shouldn't affect us much
87
** Nathan
88
*** Combing hodo script DBase files, will try and update, including batch scripts
89
** Jacob 
90
*** Sanity checks of running old scripts and comparing to new
91
*** Should be in place to combine in new matrix elements soon
92
** Junaid
93
*** demo1 being slow, file probably too large
94
*** Farm also being slow could be an issue
95
** Ali
96
*** Sym link hardcoding, switch location of outputting
97
98
* Idea of a directory setup script, something people can run and it will set up a tree of directories to save files to
99
** Can try making a version of this later this week, will need to modify output of lots of scripts!
100 14 Stephen Kay
101
----
102
103 10 Stephen Kay
h2. 2021.02.08 PionLT Software Meeting
104
105
* Updates from the group
106
** Stephen - Tried to replicate errors Jacob was having with Demo2, could not replicate issues and didn't see any script differences
107
*** May be a versioning issue, Stephen and Richard will investigate further
108
*** JLab environment/root version issue likely cause
109
** Jacob - Questions about the pionlt directories, all but the /group/c-pionlt one seem to be set up
110
*** Stephen following up with Brad on this
111
** Junaid - Some environment issues
112
*** Stephen will try to resolve later today
113
** Casey - Gave an update on his timing window scripts
114
*** https://github.com/mrcmor100/hallc_replay_XEM/tree/timing
115
*** Scripts look very nice, compare timing windows to existing ones and upload plots to network accessible location
116
*** Stephen will take a look at how they can be adapted for our coincidence running
117 13 Stephen Kay
* HeeP running discussion
118 12 Stephen Kay
** Minimum accessible spectrometer angles - SHMS 5.5, HMS 10.5, opening angle ??
119
** Want higher for HeeP running for practicality (no hall access e.t.c.)
120 10 Stephen Kay
121
----
122
123 3 Garth Huber
h2. 2021.02.01 PionLT Software Meeting
124 2 Stephen Kay
 
125
* Updates from the group
126
** Stephen - Cointime peak script updates and fixes
127
** Jacob - Issues with Demo2 cuts
128
*** Stephen thinks this may be due to lack of updating of the script after some changes Richard made, will investigate
129
** Nathan - Hodoscope script issues, tracked down to .database file. Investigating fixes
130
** Junaid - Software setup on Lark but python/root issues here, working on JLab account. Will investigate root compilation on Lark
131
*** Stephen raised that issue in getting root to compile isn't actually related to the python version used, other package/component causing issues
132
** Ali - Working on improving report files and def files
133
* "Casey Presentation":https://redmine.jlab.org/attachments/download/1175/pionLTgroup_presentation.pptx
134
** Discussion of process and software used by XEM experiment
135
** Nice reference time script in place, will exchange with Stephen/Richard and see what can be merged with each
136
** Structure and plan for analysis look similar to our own, will try to collaborate as much as possible on having a nice working set of software for online usage
137
** Raised point of online BCM/BPM monitoring
138
*** Dave mentioned it would be nice to track the stability of the BCM/BPMs over the run period, at least once per shift produce a plot/document checking this
139
*** Stephen added that this could also track the prescale factors (reported vs calculated)
140
*** Investigate idea of a once per shift script that checks last X runs and produces plots above
141
142
----
143 1 Stephen Kay
144 3 Garth Huber
h2. 2021.01.25 PionLT Preparation Meeting
145
146
* Garth Discussed run plan kinematics, purpose of Heep runs, and Luminosity scans
147
** Homework: students should look at distributed Heep kinematics and try to find some sets of singles (e') and coin (e'+p) runs which would overlap either in energy or angle with the physics kinematics, for the purpose of establishing angle and momentum offsets.
148
** Jacob also looked through Garth's physics kinematics spreadsheet, and did not find any additional errors, beyond the one GH had already identified.  That error turned out to be an error in the kinematics table in the Jeopardy (2019) proposal, and GH subsequently distributed a corrected spreadsheet.
149 4 Garth Huber
[[https://redmine.jlab.org/attachments/download/1176/pion_runplan_21jan26.ods]]
150 5 Garth Huber
[[https://redmine.jlab.org/attachments/download/1178/elas_9p900gev.out]]
151 6 Garth Huber
[[https://redmine.jlab.org/attachments/download/1179/elas_9p200gev.out]]
152 7 Garth Huber
[[https://redmine.jlab.org/attachments/download/1180/elas_8p000gev.out]]
153 8 Garth Huber
[[https://redmine.jlab.org/attachments/download/1182/elas_6p000gev.out]]
154 6 Garth Huber
155 9 Garth Huber
----
156
157 3 Garth Huber
h2. 2021.01.12 PionLT Software Meeting
158 1 Stephen Kay
 
159
* "Stephen Presentation":https://redmine.jlab.org/documents/122
160
** Discussion of analysis tasks and status as of 12/01/21. The non-annotated version of the notes is also available "here":https://redmine.jlab.org/documents/123
161
** Homework for next week is the following -
162
*** Setup and try the batch calibration scripts and the python analysis script demo
163 6 Garth Huber
*** For Stephen - Check with Brad regarding new area for files