Wiki » History » Revision 4
Revision 3 (Alexandre Camsonne, 02/25/2025 02:45 PM) → Revision 4/18 (Ken Nishida, 03/24/2025 10:07 AM)
h1. Wiki h3. List of equipement from Japan # 1. SiPM 3ch Box Qty.4 # 2. Special 30m LAN cable Qty.4 # 3. Raspberry Pi5 Qty.1 # 4. 7 inch Monitor Qty.1 # 5. USB-LAN connector Qty.1 # 6. Standard LAN cable Qty.2 # 7. NIM EASIROC Qty.1 # 8. TTL-NIM-TTL 8ch module Qty.1 (https://www.kagaku.com/hoshin/n002.html, 1ch TTLtoNIM, 4ch NIM-TTL will be used) # 9. 2ch Gate&Delay Module Qty.2 (http://www.tcnland.co.jp/archives/product_type/gatedelaygenerator_n-tm_307, 4ch G&D will be used) # 10. 4ch logic fan I/O Qty.1 (http://www.tcnland.co.jp/archives/product_type/fanin%EF%BC%8Ffanout_n-tm_102, 2ch will be used) The SiPM is 3ch SiPM Box x 4 = 12 ch total. All SiPM can be handled by the adobe items. For 8.~10., please arrange for spare modules in case the modules sent from Japan are defective. Equivalent products are fine. We were unable to handle the detector well due to the effects of noise and crosstalk from TTL with standard cat.7 LAN cables or ECL Flat cables. We will provide a cable with an additional shield on the cat.7 cable. h3. Old map of Hall A for previous SBS experiment # https://userweb.jlab.org/~efuchey/SBS_BB/Pictures/GlobalPlanHallAFloor_lowBBangle.pdf # https://redmine.jlab.org/documents/118 h3. How to operate new-firmware EASIROC, RaspberryPi, and SiPM Box # Booting EASIROC