Project

General

Profile

Analysis Tasks » History » Version 131

Richard Trotta, 01/12/2022 01:22 AM

1 8 Richard Trotta
{{>toc}}
2
3 1 Richard Trotta
h1. Analysis Tasks
4
5
| *Fall 2018/Spring 2019 Run* | %{background:lightgreen}Completed% |
6 104 Richard Trotta
| *Calibrations* | %{background:lightgreen}Completed% |
7 30 Richard Trotta
| *Efficiencies and offsets* | %{background:yellow}Ongoing% |
8
| *First iteration of cross section* | %{background:orange}On deck% |
9 1 Richard Trotta
| *Fine tuning cross section iteration* | %{background:red}To Do% |
10
| *Form factor extraction* | %{background:red}To Do% |
11 20 Richard Trotta
12 26 Richard Trotta
This is a summary page with the progress of the KaonLT experiment. Above is a quick outline of our current progress. Below are tasks assigned to members of the group. Anyone who is part of the group may contribute to a task with suggestions and/or updates on progress. Please contact the assignee on a task-by-task basis for any queries. Anyone with general questions can contact Richard Trotta (trotta@cua.edu).
13 17 Richard Trotta
14 82 Richard Trotta
h2. +Ongoing+
15 2 Richard Trotta
16 114 Richard Trotta
**%{background:cyan}Complete all by Early August 2022%**
17 70 Richard Trotta
18 114 Richard Trotta
h3. "Efficiencies":https://redmine.jlab.org/issues/511 _%{background:yellow}Mid-March 2022%_
19 47 Richard Trotta
20 83 Richard Trotta
* *"Tracking":https://redmine.jlab.org/issues/512*
21
* *"Trigger":https://redmine.jlab.org/issues/513*
22 84 Richard Trotta
* *"PID":https://redmine.jlab.org/issues/514*
23
** "HMS cer":https://redmine.jlab.org/issues/517
24
** "HMS cal":https://redmine.jlab.org/issues/518
25
** "SHMS aero":https://redmine.jlab.org/issues/519
26 1 Richard Trotta
** "SHMS cer":https://redmine.jlab.org/issues/520
27 84 Richard Trotta
** "SHMS cal":https://redmine.jlab.org/issues/521
28
* *"CPU LT":https://redmine.jlab.org/issues/515*
29 83 Richard Trotta
* *"Electronic LT":https://redmine.jlab.org/issues/515*
30 101 Richard Trotta
* *"COIN time":https://redmine.jlab.org/issues/516*
31 1 Richard Trotta
* *"Missing Mass":https://redmine.jlab.org/issues/516*
32
33 114 Richard Trotta
h3. "EDTM":https://redmine.jlab.org/issues/557 _%{background:yellow}Mid-March 2022%_
34 111 Richard Trotta
35 1 Richard Trotta
* Richard
36 130 Richard Trotta
* Jacob and Richard have looked into this with various log entries..
37 131 Richard Trotta
** "EDTM Studies run plan for beam off periods":https://logbooks.jlab.org/entry/3956405 "EDTM Run Plan (21/12/01) Analysis":https://logbooks.jlab.org/entry/3956686 "Rare Bug in Prescale GUI":https://logbooks.jlab.org/entry/3956696 "EDTM, TLT, and Lumi Scan Update":https://logbooks.jlab.org/entry/3966821 "EDTM study #2":https://logbooks.jlab.org/entry/3969498
38 51 Richard Trotta
* "Dave Mack Studies":https://hallcweb.jlab.org/DocDB/0010/001063/002/Combinatorics%20in%20Estimating%20the%20Hodo%203of4%20Trigger%20Livetimev2.pdf
39 52 Richard Trotta
40 114 Richard Trotta
h3. "Luminosity":https://redmine.jlab.org/issues/558 _%{background:yellow}Mid-March 2022%_
41 1 Richard Trotta
42 109 Richard Trotta
* Richard
43 71 Richard Trotta
** Scaler
44
** event (different times for both)
45
** LH2 boiling tests
46 1 Richard Trotta
** Need to check if the various luminosity scans give consistent results. HMS singles: partially done by Richard SHMS singles: partially done by Richard. All students need to repeat this work, particularly with new version of hcana.
47
* Need to check if the various luminosity scans give consistent results
48
* Peter Bosted has looked in detail at our data, leading to significant improvements to hcana.  We need to repeat his studies for ourselves
49 51 Richard Trotta
50 127 Richard Trotta
h3. "Elastics ":https://redmine.jlab.org/issues/561 _*%{background:yellow}Early May 2022%*_
51 126 Richard Trotta
52 127 Richard Trotta
* *"singles":https://redmine.jlab.org/issues/562*
53 126 Richard Trotta
** Richard/Ali/Vijay
54
** Initial Heepcheck offset fitting to get corrected E, E', theta'.
55
56 127 Richard Trotta
* *"coin":https://redmine.jlab.org/issues/563* 
57 126 Richard Trotta
** Richard/Ali/Vijay
58
** Initial Heepcheck offset fitting to get corrected E, E', theta'.
59
60 100 Richard Trotta
h3. "Check stability of cointime peak":https://redmine.jlab.org/issues/560 _%{background:yellow}???%_
61 54 Richard Trotta
62 52 Richard Trotta
* Stephen
63 79 Richard Trotta
* In Fpi-2 it drifted with TDC temperature and needed to be adjusted on a run-by-run basis to within 200 ps.
64 115 Richard Trotta
* Initial checks so far indicate the peak is stable. Cointime resolution will be poorer in fall 2018 run due to DAQ cabling issue. Mark has partial software fix that we need to be sure is implemented.
65 110 Richard Trotta
66 1 Richard Trotta
h3. "SHMS and HMS Optics Improvements":https://redmine.jlab.org/issues/559 _%{background:yellow}???%_
67
68 115 Richard Trotta
* Mark Jones
69 1 Richard Trotta
* "SHMS":https://hallcweb.jlab.org/DocDB/0010/001044/006/Update%20to%20Optics%20Cuts%20April%202020.pdf
70
* HMS, unsure
71
72 115 Richard Trotta
h2. +On deck+ 
73
74
**%{background:cyan}Complete by Early September 2022%**
75
76
h3. "Heepcheck offsets":https://redmine.jlab.org/issues/564 _%{background:orange}Early August 2022%_
77 1 Richard Trotta
78
* ???
79
* Check that Heepcheck offsets produce consistent p(e,e'K+)L, p(e,e'pi+)n p(e,e'p)omega missing masses.
80
81 110 Richard Trotta
h3. "Initial ep elastic cross-section checks":https://redmine.jlab.org/issues/565 _%{background:orange}Early August 2021%_
82 1 Richard Trotta
83
* Richard/Ali/Vijay
84
*  Singles cross-sections, HMS and SHMS. SHMS delta scans (only peak position checked so far, stability of normalized yield ratio not yet checked). Coin ep cross-sections.
85
* In Fpi-2, determing the correct proton absorption correction for normalized required some literature review and other digging.
86
87 86 Richard Trotta
88 1 Richard Trotta
h2. +Replays+
89
90
h3. "FULL REPLAY 1":https://redmine.jlab.org/issues/567 of data, with new calibrations **%{background:lightgreen}Done%**
91
92
* This replay should include all new kinematic offsets, better timing and PID calibrations, as well as Mark's most recent HMS and SHMS matrix elements.
93
* Quality control rechecks with new replay:
94
** carbon luminosity scans are flat vs. current and rate
95
** LH2 luminosity scans are flat vs. current and rate
96
* HMS saturation corrections?
97
* Final investigation of SHMS acceptance, optimize acceptance cuts based on sieve-slit run analysis, agreement with single-arm MC. 
98
** Compare data and simulation plots of SHMS yfp,ypfp for various ytar,delta bins to identify inconsistencies.
99
* Trigger blocking studies.
100
** Are extra factors needed to correct for missing FADC reference times, or any other DAQ related effects?  Initial info from Peter Bosted indicates this is likely to be the case.
101
* Recheck Heep singles and coin yields to identify and fix problems.
102
* Stability checks.  Need some scripts to look at invariant mass vs run number, etc., for pi+/K+/p channels.
103
104 129 Richard Trotta
h3. "FULL REPLAY 2":https://redmine.jlab.org/issues/652 of data, Post-PionLT with updated scripts _%{background:orange}Early January 2022%_
105 1 Richard Trotta
106
* This replay should include all new kinematic offsets, better timing and PID calibrations, as well as Mark's most recent HMS and SHMS matrix elements.
107
* Quality control rechecks with new replay:
108
** carbon luminosity scans are flat vs. current and rate
109
** LH2 luminosity scans are flat vs. current and rate
110
* HMS saturation corrections?
111
* Final investigation of SHMS acceptance, optimize acceptance cuts based on sieve-slit run analysis, agreement with single-arm MC. 
112
** Compare data and simulation plots of SHMS yfp,ypfp for various ytar,delta bins to identify inconsistencies.
113
* Trigger blocking studies.
114
** Are extra factors needed to correct for missing FADC reference times, or any other DAQ related effects?  Initial info from Peter Bosted indicates this is likely to be the case.
115
* Recheck Heep singles and coin yields to identify and fix problems.
116
* Stability checks.  Need some scripts to look at invariant mass vs run number, etc., for pi+/K+/p channels.
117
118
h3. "FULL REPLAY 3":https://redmine.jlab.org/issues/568 of data, with improved optics and corrections _%{background:orange}Early June 2022%_
119
120
* SECOND LEVEL ANALYSIS TASKS with REPLAY 3 ntuples:
121
** Final SHMS optic matrix element and acceptance determination.
122
** Final HMS optics check.
123
** Final Heepcheck offsets.
124
** Better detector efficiency determination.
125
** First check of Bill's L/T separation code.
126
127
h3. "FULL REPLAY 4":https://redmine.jlab.org/issues/569 of data, with final calibrations and offsets _%{background:orange}Mid-August 2022%_
128
129
* THIRD LEVEL ANALYSIS TASKS with REPLAY 4 ntuples:
130
** Final ep elastic cross-section checks.
131
** Look at data in depth, and resolve outstanding problems.
132
** First SIMC ntuple generation using new offsets.
133
** Detailed Data/SIMC comparisons for HMS and SHMS focal plane and target reconstructed quantities, as well as W, Q^2, t, phi.
134
** Preliminary L/T separation results.
135
136
h3. "FULL REPLAY 5":https://redmine.jlab.org/issues/570 of data, with outstanding problems resolved _%{background:orange}Early March 2023%_
137
138
* ADVANCED ANALYSIS TASKS with REPLAY 5 ntuples:
139
** Final SIMC ntuple generation using final parameters.
140
** Thorough look at L/T/LT/TT separations, consistency checks as necessary.
141
** Final look at systematic error contributions.
142
143
h3. "FULL REPLAY 6":https://redmine.jlab.org/issues/571 of data _%{background:orange}Early June 2023%_
144
145
* Hopefully not necessary
146
* OBTAIN:
147
** Separated cross-section results.
148
** Form factor determination begins.  Model systematic error tests. Use more than one model, if at all possible.
149
** Model dependence and other issues in form factor extraction.
150
151
*Begin thesis writing, drafts of first papers*
152 124 Richard Trotta
153 125 Richard Trotta
---
154 124 Richard Trotta
155
h2. +Completed+
156
157
h3. "BCM calibrations":https://redmine.jlab.org/issues/552 **%{background:lightgreen}Done%**
158
159
* "Fall 2018-Spring 2019":https://hallcweb.jlab.org/doc-public/ShowDocument?docid=1034
160
** BCM1,2 are stable, have a small nonlinearity >60uA that remains to be
161
   calibrated
162
** "Final BCM":https://hallcweb.jlab.org/doc-private/ShowDocument?docid=1042 for fall and spring
163
* "Summer 2019":https://hallcweb.jlab.org/doc-private/ShowDocument?docid=1037
164
** BCM1,2 both okay, including small nonlinearity corr.
165
166
h3. "Beam Energy calibrations":https://redmine.jlab.org/issues/553 **%{background:lightgreen}Done%**
167
168
* "Mark Jones":https://hallcweb.jlab.org/wiki/index.php/Table_of_12_GeV_Beam_Energy_Measurements
169
** This page incorporates May/2019 problem fix that caused to give wrong
170
   beam energies
171
172
h3. "Python analysis scripts":https://redmine.jlab.org/issues/555 **%{background:lightgreen}Done%**
173
174
* Richard/Stephen
175
* "1":https://redmine.jlab.org/attachments/download/1000/Analysis_Meeting_14_05_20.pdf , "2":https://redmine.jlab.org/attachments/download/998/KaonLTMeeting_5_13_20.pdf
176
177
h3. "Timing windows and reference times":https://redmine.jlab.org/issues/500 **%{background:lightgreen}Done%**
178
179
* Richard/Stephen
180
* This was completed for hodoscopes, drift chambers by Richard/Stephen. Every HMS/SHMS channel needs to be re-done for the new hcana code.
181
182
h3. "RF time for SHMS PID":https://redmine.jlab.org/issues/551 **%{background:lightgreen}Done%**
183
184
* Stephen
185
* "1-Apr-2020 Update":https://redmine.jlab.org/attachments/download/949/KaonLT_Meeting_01_04_20.pdf
186
** Still need to set RF gates for each particle type, apply TOF corrections for particles other than pion, 
187
   check offsets for other settings.
188
189
h3. "Calibrations":https://redmine.jlab.org/issues/476 **%{background:lightgreen}Done%**
190
191
* *"Calorimeter":https://redmine.jlab.org/issues/477*
192
** Hamlet/Richard/Hakob/Stephen/Vladimir/Vardan
193
** "HMS+SHMS":https://redmine.jlab.org/documents/74
194
** "Bill Henry's 9-Jan-2020 report on calib algorithm improvements":https://hallcweb.jlab.org/DocDB/0010/001039/001/calorimeterCommis.pdf
195
196
* *"Aerogel":https://redmine.jlab.org/issues/478*
197
** Vladimir/Richard
198
** Redmine lists calibration completed by Vladimir.  Need a link to the report. Cuts, PID analysis, efficiencies, not yet done.
199
200
* *"HGCer":https://redmine.jlab.org/issues/479*
201
** Garth/Vijay
202
** New calibrations almost done.  Report in progress. A position dependent efficiency for pi+ and K+ will have to be implemented. This is not yet started.
203
204
* *"HMS Cer":https://redmine.jlab.org/issues/480*
205
** "Richard":https://redmine.jlab.org/projects/kltexp/wiki/Kaon_LT_Meetings#Nov-262019
206
207
* *"HMS+SHMS DC":https://redmine.jlab.org/issues/481*
208
** Stephen/Richard
209
** "HMS+SHMS":https://redmine.jlab.org/documents/74
210
211
* *"Hodoscope":https://redmine.jlab.org/issues/483*
212
** Vijay/Ali
213
** The second band is alright to keep for now until we tighten our time windows. Then the calibrations will need to be redone. This will not be until efficiencies are well established.
214
215
h3. "SHMS tracking algorithm optimization and efficiencies":https://redmine.jlab.org/issues/556 **%{background:lightgreen}Done%**
216
217
* Ali
218
* "Link to Tracking Efficiencies vs Rate (9-Jun-2020)":https://redmine.jlab.org/attachments/download/1007/KaonLT_Meeting_Jun_9.pdf