Project

General

Profile

Analysis Tasks » History » Version 140

Vijay Kumar, 01/17/2022 10:12 AM

1 8 Richard Trotta
{{>toc}}
2
3 1 Richard Trotta
h1. Analysis Tasks
4
5
| *Fall 2018/Spring 2019 Run* | %{background:lightgreen}Completed% |
6 104 Richard Trotta
| *Calibrations* | %{background:lightgreen}Completed% |
7 30 Richard Trotta
| *Efficiencies and offsets* | %{background:yellow}Ongoing% |
8
| *First iteration of cross section* | %{background:orange}On deck% |
9 1 Richard Trotta
| *Fine tuning cross section iteration* | %{background:red}To Do% |
10
| *Form factor extraction* | %{background:red}To Do% |
11 20 Richard Trotta
12 26 Richard Trotta
This is a summary page with the progress of the KaonLT experiment. Above is a quick outline of our current progress. Below are tasks assigned to members of the group. Anyone who is part of the group may contribute to a task with suggestions and/or updates on progress. Please contact the assignee on a task-by-task basis for any queries. Anyone with general questions can contact Richard Trotta (trotta@cua.edu).
13 17 Richard Trotta
14 82 Richard Trotta
h2. +Ongoing+
15 2 Richard Trotta
16 114 Richard Trotta
**%{background:cyan}Complete all by Early August 2022%**
17 70 Richard Trotta
18 114 Richard Trotta
h3. "Efficiencies":https://redmine.jlab.org/issues/511 _%{background:yellow}Mid-March 2022%_
19 47 Richard Trotta
20 83 Richard Trotta
* *"Tracking":https://redmine.jlab.org/issues/512*
21
* *"Trigger":https://redmine.jlab.org/issues/513*
22 84 Richard Trotta
* *"PID":https://redmine.jlab.org/issues/514*
23
** "HMS cer":https://redmine.jlab.org/issues/517
24
** "HMS cal":https://redmine.jlab.org/issues/518
25
** "SHMS aero":https://redmine.jlab.org/issues/519
26 1 Richard Trotta
** "SHMS cer":https://redmine.jlab.org/issues/520
27 84 Richard Trotta
** "SHMS cal":https://redmine.jlab.org/issues/521
28
* *"CPU LT":https://redmine.jlab.org/issues/515*
29 83 Richard Trotta
* *"Electronic LT":https://redmine.jlab.org/issues/515*
30 101 Richard Trotta
* *"COIN time":https://redmine.jlab.org/issues/516*
31 1 Richard Trotta
* *"Missing Mass":https://redmine.jlab.org/issues/516*
32
33 114 Richard Trotta
h3. "EDTM":https://redmine.jlab.org/issues/557 _%{background:yellow}Mid-March 2022%_
34 111 Richard Trotta
35 1 Richard Trotta
* Richard
36 130 Richard Trotta
* Jacob and Richard have looked into this with various log entries..
37 132 Richard Trotta
** "EDTM Study #1":https://logbooks.jlab.org/entry/3956405
38
** "EDTM Run Plan (21/12/01) Analysis":https://logbooks.jlab.org/entry/3956686
39
** "Rare Bug in Prescale GUI":https://logbooks.jlab.org/entry/3956696
40
** "EDTM, TLT, and Lumi Scan Update":https://logbooks.jlab.org/entry/3966821 
41
** "EDTM Study #2":https://logbooks.jlab.org/entry/3969498
42 51 Richard Trotta
* "Dave Mack Studies":https://hallcweb.jlab.org/DocDB/0010/001063/002/Combinatorics%20in%20Estimating%20the%20Hodo%203of4%20Trigger%20Livetimev2.pdf
43 52 Richard Trotta
44 114 Richard Trotta
h3. "Luminosity":https://redmine.jlab.org/issues/558 _%{background:yellow}Mid-March 2022%_
45 1 Richard Trotta
46 133 Richard Trotta
* Richard, Ali
47 71 Richard Trotta
** LH2 boiling tests
48 133 Richard Trotta
** PID track studies
49
** PID calibration is good besides the HODO (need pionLT)
50
** Vijay has done some coin time studies which will be helpful
51
** Richard has analyzed most of the carbon data but need to update scripts with pionLT fixes to TLT and tracking
52 51 Richard Trotta
53 127 Richard Trotta
h3. "Elastics ":https://redmine.jlab.org/issues/561 _*%{background:yellow}Early May 2022%*_
54 126 Richard Trotta
55 135 Richard Trotta
* Richard, 10.6 data _*%{background:yellow}TODO%*_
56
* Ali, 8.2/6.2 data _*%{background:yellow}TODO%*_
57 138 Vijay Kumar
* Vijay, 3.9/4.9 KaonLT data and 2.7/3.6/4.5 PionLT data _*%{background:yellow}TODO%*_
58 134 Richard Trotta
59 126 Richard Trotta
* *"singles":https://redmine.jlab.org/issues/562*
60
** Initial Heepcheck offset fitting to get corrected E, E', theta'.
61 139 Vijay Kumar
** 3.9 GeV, 5 settings _*%{background:green}DONE%*_  
62 140 Vijay Kumar
** 4.9 GeV, 4 settings _*%{background:green}DONE%*_  
63
** 2.7 GeV, 3 settings _*%{background:green}DONE%*_
64
** 3.6 and 4.5 do not have singles data.
65 127 Richard Trotta
66 126 Richard Trotta
* *"coin":https://redmine.jlab.org/issues/563* 
67
** Initial Heepcheck offset fitting to get corrected E, E', theta'.
68
69 100 Richard Trotta
h3. "Check stability of cointime peak":https://redmine.jlab.org/issues/560 _%{background:yellow}???%_
70 54 Richard Trotta
71 136 Richard Trotta
* Vijay
72
** A previous study has been done by Vijay, need more info
73 79 Richard Trotta
* In Fpi-2 it drifted with TDC temperature and needed to be adjusted on a run-by-run basis to within 200 ps.
74 115 Richard Trotta
* Initial checks so far indicate the peak is stable. Cointime resolution will be poorer in fall 2018 run due to DAQ cabling issue. Mark has partial software fix that we need to be sure is implemented.
75 110 Richard Trotta
76 1 Richard Trotta
h3. "SHMS and HMS Optics Improvements":https://redmine.jlab.org/issues/559 _%{background:yellow}???%_
77
78 115 Richard Trotta
* Mark Jones
79 1 Richard Trotta
* "SHMS":https://hallcweb.jlab.org/DocDB/0010/001044/006/Update%20to%20Optics%20Cuts%20April%202020.pdf
80
* HMS, unsure
81
82 115 Richard Trotta
h2. +On deck+ 
83
84
**%{background:cyan}Complete by Early September 2022%**
85
86
h3. "Heepcheck offsets":https://redmine.jlab.org/issues/564 _%{background:orange}Early August 2022%_
87 1 Richard Trotta
88
* ???
89
* Check that Heepcheck offsets produce consistent p(e,e'K+)L, p(e,e'pi+)n p(e,e'p)omega missing masses.
90
91 110 Richard Trotta
h3. "Initial ep elastic cross-section checks":https://redmine.jlab.org/issues/565 _%{background:orange}Early August 2021%_
92 1 Richard Trotta
93
* Richard/Ali/Vijay
94
*  Singles cross-sections, HMS and SHMS. SHMS delta scans (only peak position checked so far, stability of normalized yield ratio not yet checked). Coin ep cross-sections.
95
* In Fpi-2, determing the correct proton absorption correction for normalized required some literature review and other digging.
96
97 86 Richard Trotta
98 1 Richard Trotta
h2. +Replays+
99
100
h3. "FULL REPLAY 1":https://redmine.jlab.org/issues/567 of data, with new calibrations **%{background:lightgreen}Done%**
101
102
* This replay should include all new kinematic offsets, better timing and PID calibrations, as well as Mark's most recent HMS and SHMS matrix elements.
103
* Quality control rechecks with new replay:
104
** carbon luminosity scans are flat vs. current and rate
105
** LH2 luminosity scans are flat vs. current and rate
106
* HMS saturation corrections?
107
* Final investigation of SHMS acceptance, optimize acceptance cuts based on sieve-slit run analysis, agreement with single-arm MC. 
108
** Compare data and simulation plots of SHMS yfp,ypfp for various ytar,delta bins to identify inconsistencies.
109
* Trigger blocking studies.
110
** Are extra factors needed to correct for missing FADC reference times, or any other DAQ related effects?  Initial info from Peter Bosted indicates this is likely to be the case.
111
* Recheck Heep singles and coin yields to identify and fix problems.
112
* Stability checks.  Need some scripts to look at invariant mass vs run number, etc., for pi+/K+/p channels.
113
114 129 Richard Trotta
h3. "FULL REPLAY 2":https://redmine.jlab.org/issues/652 of data, Post-PionLT with updated scripts _%{background:orange}Early January 2022%_
115 1 Richard Trotta
116
* This replay should include all new kinematic offsets, better timing and PID calibrations, as well as Mark's most recent HMS and SHMS matrix elements.
117
* Quality control rechecks with new replay:
118
** carbon luminosity scans are flat vs. current and rate
119
** LH2 luminosity scans are flat vs. current and rate
120
* HMS saturation corrections?
121
* Final investigation of SHMS acceptance, optimize acceptance cuts based on sieve-slit run analysis, agreement with single-arm MC. 
122
** Compare data and simulation plots of SHMS yfp,ypfp for various ytar,delta bins to identify inconsistencies.
123
* Trigger blocking studies.
124
** Are extra factors needed to correct for missing FADC reference times, or any other DAQ related effects?  Initial info from Peter Bosted indicates this is likely to be the case.
125
* Recheck Heep singles and coin yields to identify and fix problems.
126
* Stability checks.  Need some scripts to look at invariant mass vs run number, etc., for pi+/K+/p channels.
127
128
h3. "FULL REPLAY 3":https://redmine.jlab.org/issues/568 of data, with improved optics and corrections _%{background:orange}Early June 2022%_
129
130
* SECOND LEVEL ANALYSIS TASKS with REPLAY 3 ntuples:
131
** Final SHMS optic matrix element and acceptance determination.
132
** Final HMS optics check.
133
** Final Heepcheck offsets.
134
** Better detector efficiency determination.
135
** First check of Bill's L/T separation code.
136
137
h3. "FULL REPLAY 4":https://redmine.jlab.org/issues/569 of data, with final calibrations and offsets _%{background:orange}Mid-August 2022%_
138
139
* THIRD LEVEL ANALYSIS TASKS with REPLAY 4 ntuples:
140
** Final ep elastic cross-section checks.
141
** Look at data in depth, and resolve outstanding problems.
142
** First SIMC ntuple generation using new offsets.
143
** Detailed Data/SIMC comparisons for HMS and SHMS focal plane and target reconstructed quantities, as well as W, Q^2, t, phi.
144
** Preliminary L/T separation results.
145
146
h3. "FULL REPLAY 5":https://redmine.jlab.org/issues/570 of data, with outstanding problems resolved _%{background:orange}Early March 2023%_
147
148
* ADVANCED ANALYSIS TASKS with REPLAY 5 ntuples:
149
** Final SIMC ntuple generation using final parameters.
150
** Thorough look at L/T/LT/TT separations, consistency checks as necessary.
151
** Final look at systematic error contributions.
152
153
h3. "FULL REPLAY 6":https://redmine.jlab.org/issues/571 of data _%{background:orange}Early June 2023%_
154
155
* Hopefully not necessary
156
* OBTAIN:
157
** Separated cross-section results.
158
** Form factor determination begins.  Model systematic error tests. Use more than one model, if at all possible.
159
** Model dependence and other issues in form factor extraction.
160
161
*Begin thesis writing, drafts of first papers*
162 124 Richard Trotta
163 125 Richard Trotta
---
164 124 Richard Trotta
165
h2. +Completed+
166
167
h3. "BCM calibrations":https://redmine.jlab.org/issues/552 **%{background:lightgreen}Done%**
168
169
* "Fall 2018-Spring 2019":https://hallcweb.jlab.org/doc-public/ShowDocument?docid=1034
170
** BCM1,2 are stable, have a small nonlinearity >60uA that remains to be
171
   calibrated
172
** "Final BCM":https://hallcweb.jlab.org/doc-private/ShowDocument?docid=1042 for fall and spring
173
* "Summer 2019":https://hallcweb.jlab.org/doc-private/ShowDocument?docid=1037
174
** BCM1,2 both okay, including small nonlinearity corr.
175
176
h3. "Beam Energy calibrations":https://redmine.jlab.org/issues/553 **%{background:lightgreen}Done%**
177
178
* "Mark Jones":https://hallcweb.jlab.org/wiki/index.php/Table_of_12_GeV_Beam_Energy_Measurements
179
** This page incorporates May/2019 problem fix that caused to give wrong
180
   beam energies
181
182
h3. "Python analysis scripts":https://redmine.jlab.org/issues/555 **%{background:lightgreen}Done%**
183
184
* Richard/Stephen
185
* "1":https://redmine.jlab.org/attachments/download/1000/Analysis_Meeting_14_05_20.pdf , "2":https://redmine.jlab.org/attachments/download/998/KaonLTMeeting_5_13_20.pdf
186
187
h3. "Timing windows and reference times":https://redmine.jlab.org/issues/500 **%{background:lightgreen}Done%**
188
189
* Richard/Stephen
190
* This was completed for hodoscopes, drift chambers by Richard/Stephen. Every HMS/SHMS channel needs to be re-done for the new hcana code.
191
192
h3. "RF time for SHMS PID":https://redmine.jlab.org/issues/551 **%{background:lightgreen}Done%**
193
194
* Stephen
195
* "1-Apr-2020 Update":https://redmine.jlab.org/attachments/download/949/KaonLT_Meeting_01_04_20.pdf
196
** Still need to set RF gates for each particle type, apply TOF corrections for particles other than pion, 
197
   check offsets for other settings.
198
199
h3. "Calibrations":https://redmine.jlab.org/issues/476 **%{background:lightgreen}Done%**
200
201
* *"Calorimeter":https://redmine.jlab.org/issues/477*
202
** Hamlet/Richard/Hakob/Stephen/Vladimir/Vardan
203
** "HMS+SHMS":https://redmine.jlab.org/documents/74
204
** "Bill Henry's 9-Jan-2020 report on calib algorithm improvements":https://hallcweb.jlab.org/DocDB/0010/001039/001/calorimeterCommis.pdf
205
206
* *"Aerogel":https://redmine.jlab.org/issues/478*
207
** Vladimir/Richard
208
** Redmine lists calibration completed by Vladimir.  Need a link to the report. Cuts, PID analysis, efficiencies, not yet done.
209
210
* *"HGCer":https://redmine.jlab.org/issues/479*
211
** Garth/Vijay
212
** New calibrations almost done.  Report in progress. A position dependent efficiency for pi+ and K+ will have to be implemented. This is not yet started.
213
214
* *"HMS Cer":https://redmine.jlab.org/issues/480*
215
** "Richard":https://redmine.jlab.org/projects/kltexp/wiki/Kaon_LT_Meetings#Nov-262019
216
217
* *"HMS+SHMS DC":https://redmine.jlab.org/issues/481*
218
** Stephen/Richard
219
** "HMS+SHMS":https://redmine.jlab.org/documents/74
220
221
* *"Hodoscope":https://redmine.jlab.org/issues/483*
222
** Vijay/Ali
223
** The second band is alright to keep for now until we tighten our time windows. Then the calibrations will need to be redone. This will not be until efficiencies are well established.
224
225
h3. "SHMS tracking algorithm optimization and efficiencies":https://redmine.jlab.org/issues/556 **%{background:lightgreen}Done%**
226
227
* Ali
228
* "Link to Tracking Efficiencies vs Rate (9-Jun-2020)":https://redmine.jlab.org/attachments/download/1007/KaonLT_Meeting_Jun_9.pdf