Project

General

Profile

Analysis Tasks » History » Version 64

Richard Trotta, 07/08/2020 04:25 PM

1 8 Richard Trotta
{{>toc}}
2
3 1 Richard Trotta
h1. Analysis Tasks
4
5
| *Fall 2018/Spring 2019 Run* | %{background:lightgreen}Completed% |
6
| *Calibrations* | %{background:yellow}Ongoing% |
7 30 Richard Trotta
| *Efficiencies and offsets* | %{background:yellow}Ongoing% |
8
| *First iteration of cross section* | %{background:orange}On deck% |
9 1 Richard Trotta
| *Fine tuning cross section iteration* | %{background:red}To Do% |
10
| *Form factor extraction* | %{background:red}To Do% |
11 20 Richard Trotta
12 26 Richard Trotta
This is a summary page with the progress of the KaonLT experiment. Above is a quick outline of our current progress. Below are tasks assigned to members of the group. Anyone who is part of the group may contribute to a task with suggestions and/or updates on progress. Please contact the assignee on a task-by-task basis for any queries. Anyone with general questions can contact Richard Trotta (trotta@cua.edu).
13 17 Richard Trotta
14 40 Richard Trotta
h2. +Ongoing+ ["Calibrations":https://redmine.jlab.org/issues/476] ["Efficiencies and offsets":https://redmine.jlab.org/issues/511] 
15 2 Richard Trotta
16 27 Richard Trotta
h3. "Timing windows and reference times":https://redmine.jlab.org/issues/500
17 23 Richard Trotta
18
* Richard/Stephen
19 52 Richard Trotta
* This was completed for hodoscopes, drift chambers by Richard/Stephen. Every HMS/SHMS channel needs to be re-done for the new hcana code.
20
* Status: %{background:yellow}Ongoing%
21 1 Richard Trotta
22 52 Richard Trotta
h3. RF time for SHMS PID
23
24
* Stephen
25
* "1-Apr-2020 Update":https://redmine.jlab.org/attachments/download/949/KaonLT_Meeting_01_04_20.pdf
26
** Still need to set RF gates for each particle type, check offsets for other settings.
27
* Status: %{background:yellow}Ongoing%
28
29 50 Richard Trotta
h3. BCM calibrations
30 49 Richard Trotta
31
* "Fall 2018-Spring 2019":https://hallcweb.jlab.org/doc-public/ShowDocument?docid=1034
32
** BCM1,2 are stable, have a small nonlinearity >60uA that remains to be
33
   calibrated
34
* "Summer 2019":https://hallcweb.jlab.org/doc-private/ShowDocument?docid=1037
35 1 Richard Trotta
** BCM1,2 both okay, including small nonlinearity corr.
36 53 Richard Trotta
* Status: %{background:yellow}Ongoing% for Fall-Spring.  %{background:lightgreen}Completed% for Summer
37 1 Richard Trotta
38 50 Richard Trotta
h3. Beam Energy calibrations
39
40
* "Mark Jones":https://hallcweb.jlab.org/wiki/index.php/Table_of_12_GeV_Beam_Energy_Measurements
41
** This page incorporates May/2019 problem fix that caused to give wrong
42
   beam energies
43
* Status: %{background:lightgreen}Completed%
44 1 Richard Trotta
45 52 Richard Trotta
h3. SHMS and HMS Optics Improvements
46 1 Richard Trotta
47 52 Richard Trotta
* Mark Jones
48
* "SHMS":https://hallcweb.jlab.org/DocDB/0010/001044/006/Update%20to%20Optics%20Cuts%20April%202020.pdf
49
* HMS, unsure
50
* Status: %{background:yellow}Ongoing%
51
52 50 Richard Trotta
h3. Initial run tables
53 49 Richard Trotta
54 14 Richard Trotta
* Run tables from shift workers posted on Redmine.  Has anyone gone through this to fix erroneous entries?
55 1 Richard Trotta
* Status: %{background:yellow}Ongoing%
56 4 Richard Trotta
57 1 Richard Trotta
h3. "Calorimeter":https://redmine.jlab.org/issues/477
58
59
* Hamlet/Richard/Hakob/Stephen/Vladimir/Vardan
60 52 Richard Trotta
* "HMS+SHMS":https://redmine.jlab.org/documents/74
61
* "Bill Henry's 9-Jan-2020 report on calib algorithm improvements":https://hallcweb.jlab.org/DocDB/0010/001039/001/calorimeterCommis.pdf
62 14 Richard Trotta
* Status %{background:yellow}Ongoing%
63 1 Richard Trotta
64
h3. "Aerogel":https://redmine.jlab.org/issues/478
65
66 52 Richard Trotta
* Vladimir/Richard
67
* Redmine lists calibration completed by Vladimir.  Need a link to the report. Cuts, PID analysis, efficiencies, not yet done.
68
* Status: %{background:yellow}Ongoing%
69 1 Richard Trotta
70
h3. "HGCer":https://redmine.jlab.org/issues/479
71 14 Richard Trotta
72 1 Richard Trotta
* Garth/Vijay
73 52 Richard Trotta
* New calibrations almost done.  Report in progress. A position dependent efficiency for pi+ and K+ will have to be implemented. This is not yet started.
74
* Status: %{background:yellow}Ongoing%
75 1 Richard Trotta
76
h3. "HMS Cer":https://redmine.jlab.org/issues/480
77
78 52 Richard Trotta
* "Richard":https://redmine.jlab.org/projects/kltexp/wiki/Kaon_LT_Meetings#Nov-262019
79 1 Richard Trotta
* Status %{background:lightgreen}Completed%
80 14 Richard Trotta
81 52 Richard Trotta
h3. "HMS+SHMS DC":https://redmine.jlab.org/issues/481
82 4 Richard Trotta
83 52 Richard Trotta
* Stephen/Richard
84
* "HMS+SHMS":https://redmine.jlab.org/documents/74
85
* Status: %{background:yellow}Ongoing%
86 14 Richard Trotta
87 4 Richard Trotta
h3. "SHMS DC":https://redmine.jlab.org/issues/482
88 24 Richard Trotta
89 31 Richard Trotta
* Richard/Stephen
90 52 Richard Trotta
* Status: %{background:yellow}Ongoing%
91 14 Richard Trotta
92 4 Richard Trotta
h3. "Hodoscope":https://redmine.jlab.org/issues/483
93 28 Richard Trotta
94 31 Richard Trotta
* Vijay/Ali
95 2 Richard Trotta
* Status %{background:lightgreen}Completed%
96 46 Richard Trotta
97 47 Richard Trotta
h3. Efficiencies 
98 39 Richard Trotta
99
| *Tracking* | %{background:yellow}"To Do":https://redmine.jlab.org/issues/512% |
100
| *Trigger* | %{background:yellow}"To Do":https://redmine.jlab.org/issues/513% |
101
| *PID* | "HMS cer":https://redmine.jlab.org/issues/517 %{background:yellow}To Do% |
102
|  | "HMS cal":https://redmine.jlab.org/issues/518 %{background:yellow}To Do% |
103
|  | "SHMS aero":https://redmine.jlab.org/issues/519 %{background:yellow}To Do% |
104
|  | "SHMS cer":https://redmine.jlab.org/issues/520 %{background:yellow}To Do% |
105
|  | "SHMS cal":https://redmine.jlab.org/issues/521 %{background:yellow}To Do% |
106
| *CPU LT* | %{background:yellow}"To Do":https://redmine.jlab.org/issues/515% |
107
| *Electronic LT* | %{background:yellow}"To Do":https://redmine.jlab.org/issues/515% |
108 1 Richard Trotta
| *COIN time* | %{background:yellow}"To Do":https://redmine.jlab.org/issues/516% |
109
| *Missing Mass* | %{background:yellow}"To Do":https://redmine.jlab.org/issues/516% |
110
111
h3. Python analysis scripts
112
113
* Richard/Stephen
114 39 Richard Trotta
* "1":https://redmine.jlab.org/attachments/download/1000/Analysis_Meeting_14_05_20.pdf , "2":https://redmine.jlab.org/attachments/download/998/KaonLTMeeting_5_13_20.pdf
115 33 Richard Trotta
* Status %{background:lightgreen}Completed%
116 51 Richard Trotta
117 52 Richard Trotta
h3. SHMS tracking algorithm optimization and efficiencies.
118
119
* Ali
120
* "Link to Tracking Efficiencies vs Rate (9-Jun-2020)":https://redmine.jlab.org/attachments/download/1007/KaonLT_Meeting_Jun_9.pdf
121
* Status: %{background:yellow}Ongoing%
122
123 1 Richard Trotta
h3. EDTM
124
125
* Richard
126
* This has been looked at by various people.  Need links to documentation.
127
* "Dave Mack Studies":https://hallcweb.jlab.org/DocDB/0010/001063/002/Combinatorics%20in%20Estimating%20the%20Hodo%203of4%20Trigger%20Livetimev2.pdf
128 51 Richard Trotta
* Status: %{background:yellow}Ongoing%
129
130
h3. Luminosity 
131
132 52 Richard Trotta
* Richard/Ali/Vijay
133
* Carbon luminosity scans versus current and rate
134
** Need to check if the various luminosity scans give consistent results. HMS singles: partially done by Richard SHMS singles: partially done by Richard. All students need to repeat this work, particularly with new version of hcana.
135
* Need to check if the various luminosity scans give consistent results
136
* Peter Bosted has looked in detail at our data, leading to significant improvements to hcana.  We need to repeat his studies for ourselves
137 1 Richard Trotta
* Status %{background:yellow}Ongoing%
138
139 51 Richard Trotta
h2. +On deck+ 
140
141 54 Richard Trotta
h3. Check stability of cointime peak
142 52 Richard Trotta
143 55 Richard Trotta
* ???
144 52 Richard Trotta
* In Fpi-2 it drifted with TDC temperature and needed to be adjusted on a run-by-run basis to within 200 ps.
145
* Initial checks so far indicate the peak is stable. Cointime resolution will be poorer in fall 2018 run due to DAQ cabling issue. Mark has partial software fix that we need to be sure is implemented.
146
* Status %{background:orange}On deck%
147
148 1 Richard Trotta
h3. Elastics 
149
150 52 Richard Trotta
* Richard/Ali/Vijay
151
* Initial Heepcheck offset fitting to get corrected E, E', theta'.
152 1 Richard Trotta
* Status %{background:orange}On deck%
153 52 Richard Trotta
154
h3. Initial ep elastic cross-section checks
155
156
* Richard/Ali/Vijay
157
*  Singles cross-sections, HMS and SHMS. SHMS delta scans (only peak position checked so far, stability of normalized yield ratio not yet checked). Coin ep cross-sections.
158
* In Fpi-2, determing the correct proton absorption correction for normalized required some literature review and other digging.
159
* Status %{background:orange}On deck%
160
161
h3. Heepcheck offsets
162
163 55 Richard Trotta
* ???
164 52 Richard Trotta
* Check that Heepcheck offsets produce consistent p(e,e'K+)L, p(e,e'pi+)n p(e,e'p)omega missing masses.
165
* Status %{background:orange}On deck%
166
167 4 Richard Trotta
h3. First iteration of cross section
168
169 22 Richard Trotta
* Status %{background:orange}On deck%
170
171 1 Richard Trotta
h2. +Completed+
172 56 Richard Trotta
173
h2. +Replays+
174
175 64 Richard Trotta
h3. FULL REPLAY 1 of data, with new calibrations. 
176 1 Richard Trotta
177 64 Richard Trotta
* Status %{background:yellow}Ongoing%
178 56 Richard Trotta
* This replay should include all new kinematic offsets, better timing and PID calibrations, as well as Mark's most recent HMS and SHMS matrix elements.
179
* Quality control rechecks with new replay:
180
** carbon luminosity scans are flat vs. current and rate
181
** LH2 luminosity scans are flat vs. current and rate
182
* HMS saturation corrections?
183
* Final investigation of SHMS acceptance, optimize acceptance cuts based on sieve-slit run analysis, agreement with single-arm MC. 
184
** Compare data and simulation plots of SHMS yfp,ypfp for various ytar,delta bins to identify inconsistencies.
185
* Trigger blocking studies.
186
** Are extra factors needed to correct for missing FADC reference times, or any other DAQ related effects?  Initial info from Peter Bosted indicates this is likely to be the case.
187
* Recheck Heep singles and coin yields to identify and fix problems.
188 1 Richard Trotta
* Stability checks.  Need some scripts to look at invariant mass vs run number, etc., for pi+/K+/p channels.
189 56 Richard Trotta
190 64 Richard Trotta
h3. FULL REPLAY 1 of data, with new calibrations. 
191 61 Richard Trotta
192 64 Richard Trotta
* Status %{background:yellow}Ongoing%
193 57 Richard Trotta
* This replay should include all new kinematic offsets, better timing and PID calibrations, as well as Mark's most recent HMS and SHMS matrix elements.
194
* Quality control rechecks with new replay:
195
** carbon luminosity scans are flat vs. current and rate
196
** LH2 luminosity scans are flat vs. current and rate
197
* HMS saturation corrections?
198
* Final investigation of SHMS acceptance, optimize acceptance cuts based on sieve-slit run analysis, agreement with single-arm MC. 
199
** Compare data and simulation plots of SHMS yfp,ypfp for various ytar,delta bins to identify inconsistencies.
200
* Trigger blocking studies.
201
** Are extra factors needed to correct for missing FADC reference times, or any other DAQ related effects?  Initial info from Peter Bosted indicates this is likely to be the case.
202 1 Richard Trotta
* Recheck Heep singles and coin yields to identify and fix problems.
203 57 Richard Trotta
* Stability checks.  Need some scripts to look at invariant mass vs run number, etc., for pi+/K+/p channels.
204 1 Richard Trotta
205 64 Richard Trotta
h3. FULL REPLAY 2 of data, with improved optics and corrections. 
206 63 Richard Trotta
207 64 Richard Trotta
* Status %{background:orange}On deck%
208 57 Richard Trotta
* SECOND LEVEL ANALYSIS TASKS with REPLAY 2 ntuples:
209 58 Richard Trotta
** Final SHMS optic matrix element and acceptance determination.
210
** Final HMS optics check.
211 1 Richard Trotta
** Final Heepcheck offsets.
212 58 Richard Trotta
** Better detector efficiency determination.
213 1 Richard Trotta
** First check of Bill's L/T separation code.
214 58 Richard Trotta
215 64 Richard Trotta
h3. FULL REPLAY 3 of data, with final calibrations and offsets. 
216 63 Richard Trotta
217 64 Richard Trotta
* Status %{background:orange}On deck%
218 58 Richard Trotta
* THIRD LEVEL ANALYSIS TASKS with REPLAY 3 ntuples:
219
** Final ep elastic cross-section checks.
220 1 Richard Trotta
** Look at data in depth, and resolve outstanding problems.
221 58 Richard Trotta
** First SIMC ntuple generation using new offsets.
222 1 Richard Trotta
** Detailed Data/SIMC comparisons for HMS and SHMS focal plane and target reconstructed quantities, as well as W, Q^2, t, phi.
223 58 Richard Trotta
** Preliminary L/T separation results.
224 56 Richard Trotta
225 64 Richard Trotta
h3. FULL REPLAY 4 of data, with outstanding problems resolved. 
226 56 Richard Trotta
227 64 Richard Trotta
* Status %{background:orange}On deck%
228 57 Richard Trotta
* ADVANCED ANALYSIS TASKS with REPLAY 4 ntuples:
229 1 Richard Trotta
** Final SIMC ntuple generation using final parameters.
230 58 Richard Trotta
** Thorough look at L/T/LT/TT separations, consistency checks as necessary.
231
** Final look at systematic error contributions.
232
233 64 Richard Trotta
h3. Hopefully not necessary, but if we have to: FULL REPLAY 5 of data. 
234 63 Richard Trotta
235 64 Richard Trotta
* Status %{background:red}To Do%
236 57 Richard Trotta
* OBTAIN:
237
** Separated cross-section results.
238
** Form factor determination begins.  Model systematic error tests. Use more than one model, if at all possible.
239
** Model dependence and other issues in form factor extraction.
240 1 Richard Trotta
241 57 Richard Trotta
*Begin thesis writing, drafts of first papers*