Beam test table and detector dimensions » History » Version 2
Jimmy Caylor, 06/16/2022 02:17 PM
| 1 | 1 | Jimmy Caylor | h1. Beam test table and detector dimensions |
|---|---|---|---|
| 2 | |||
| 3 | Attached below is a drawing of the relative dimensions of the test stand and the detectors. On the PDF the dimensions at the top indicate the thickness of the detectors and the dimensions on the bottom indicate the distance between the faces of the detector. |
||
| 4 | |||
| 5 | 2 | Jimmy Caylor | The table is approximately placed at 8.2 m from the scattering chamber and 73 degrees beam left. These values will be updated after a survey of the table is complete. |