Version 5 - History - Hallc beamtest runlist - SoLID ECal - Redmine

4

Jixie Zhang

5-pass beam, 10.549 GeV

5

6

=================================================================

131

5

Jixie Zhang

:::::::::::::::::::::::USEFUL DATA START::::::::::::::::::::::

132

Before run 3050, only part of the pulse was recorded, therefore all these runs are gabages.

133

Runs 3050 - 3057 could be useful, but their HVs are not perfect.

134

==============================================================

135

for both slot #7 and #8, changed to the following 2 lines:

166

5

Jixie Zhang

::::::::::::::::::::::::GOODEN DATA START:::::::::::::::::::::::

167

================================================================

176

5

Jixie Zhang

3058    production, 05:15 July 9th - 03:50, target=Loop 2 LH2,shms_p=8.035,shms_theta=7.83,hms_p=-2.398,hms_theta=28.19,

177

	13:10 target changed to dummy, I=38uA,

178

	18:43 target changed to Loop 2 LH2, I=38uA

179

180

3059    production, 03:56-15:24 July 10th,target=Loop 2 LH2,shms_p=8.035,shms_theta=7.83,hms_p=-2.398,hms_theta=28.19,

181

3060    production, 15:25-00:35, target=Loop 2 LH2,shms_p=8.035,shms_theta=7.83,hms_p=-2.398,hms_theta=28.19,

182

3061    production, 00:36-09:41 July 11th,target=Loop 2 LH2,shms_p=8.035,shms_theta=7.83,hms_p=-2.398,hms_theta=28.19,

183

	05:55 SHMS rotated to 9.83deg, shms_p=8.035,shms_theta=9.83,hms_p=-2.398,hms_theta=28.19,

184

185

3062    production, 09:41-10:15 July 11th,target=Loop 2 LH2,shms_p=8.035,shms_theta=9.83,hms_p=-2.398,hms_theta=28.19,

187

5

Jixie Zhang

188

	12:53 SHMS rotated to 5.65deg

189

190

3064    production, 16:06-11:19 July 12th,target=Loop 2 LH2,shms_p=8.035,shms_theta=5.65,hms_p=-2.398,hms_theta=28.19

191

192

3065    production, 11:19-18:02 July 12th,target=Loop 2 LH2,shms_p=8.035,shms_theta=5.65,hms_p=-2.398,hms_theta=28.19

193

3066    production, 18:02-00:43,target=Loop 2 LH2,shms_p=8.035,shms_theta=5.65,hms_p=-2.398,hms_theta=28.19

194

3067    production, 00:45-11:48 July 13th,target=Loop 2 LH2,shms_p=8.035,shms_theta=5.65,hms_p=-2.398,hms_theta=28.19

195

3068    production, 11:48-02:04, target=Loop 2 LH2,shms_p=8.035,shms_theta=5.65,hms_p=-2.398,hms_theta=28.19

196

	13:15, target ladder moved to home, no target (absolute empty)

197

	14:50, target changed to dummy

198

	23:28, target changed to Loop 2 10cm LH2

199

200

3069    production, 02:04-09:54 July 14th, target=Loop 2 LH2,shms_p=8.035,shms_theta=5.65,hms_p=-2.398,hms_theta=28.19

201

3070    production, 09:55 July 14th - 10:16 July 15th, target=Loop 2 LH2,shms_p=8.035,shms_theta=5.65,hms_p=-2.398,hms_theta=28.19

202

3071    production, 10:16-03:26 July 15th, target=Loop 2 LH2,shms_p=8.035,shms_theta=5.65,hms_p=-2.398,hms_theta=28.19

203

	16:38 target changed to dummy

204

	19:33 target changed to Loop 2 LH2

205

206

3072    production, 03:27-16:39 July 16th, target=Loop 2 LH2,shms_p=8.035,shms_theta=5.65,hms_p=-2.398,hms_theta=28.19

207

	13:29 SHMS rotated to 9.65deg, tried to get I=80uA

208

209

3073    production, 16:42-14:26 July 17th,target=Loop 2 LH2,shms_p=8.035,shms_theta=9.66,hms_p=-2.398,hms_theta=28.19

210

3074    production, 14:26-02:11,target=Loop 2 LH2,shms_p=8.035,shms_theta=9.66,hms_p=-2.398,hms_theta=28.19

211

3075    production, 02:11-10:35 July 18th,target=Loop 2 LH2,shms_p=8.035,shms_theta=9.66,hms_p=-2.398,hms_theta=28.19

212

3076    production, 10:16-00:39, target=Loop 2 LH2,shms_p=8.035,shms_theta=9.66,hms_p=-2.398,hms_theta=28.19

213

3077    production, 00:39-09:42 July 19th, target=Loop 2 LH2,shms_p=8.035,shms_theta=9.66,hms_p=-2.398,hms_theta=28.19

214

	06:51 target changed to dummy

215

216

3078    production, 09:43-00:29 July 20th, target=dummy,shms_p=8.035,shms_theta=9.66,hms_p=-2.398,hms_theta=28.19

217

	10:04 target changed to Loop 2 LH2, target=Loop 2 LH2,shms_p=8.035,shms_theta=9.66,hms_p=-2.398,hms_theta=28.19

218

	12:00-ish, SHMS rotated to 8.68deg, HMS rotated to 34.15deg,

219

	target_type=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

220

221

	beam stopped at 19:00-ish, no beam for whole day of July 20th

222

===========================================================

227

5

Jixie Zhang

===========================================================

230

5

Jixie Zhang

3086    production, 03:11-09:42 July 21st, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

231

3087    production, 09:43-16:07 July 21st, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

232

3088    production, 16:07-12:23 July 22nd, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

233

3089    production, 12:23-04:28 July 23rd, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

234

3090    production, 04:28-15:44 July 23rd, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

235

3091    production, 15:47-05:28 July 24th, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

236

3092    production, 05:28-18:22 July 24th, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

237

3093    production, 18:22-09:32 July 25th, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

238

3094    production, 09:33-23:40 July 25th, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

239

3095    production, 23:41-09:29 July 26th, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

240

3096    production, 09:29-15:35,July 26th, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

241

	13:45 target changed to dummy

242

	beam stopped at ~15:10 due to thunderstorm.

243

244

3097    production, 15:35 July 26th - 04:56 July 28th, target=dummy,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

245

	Dummy target when this run was started. At 22:45 July 26, target ladder was changed to home(empty).

246

	Tune beam cane at 11:27 July 27th.

247

	12:15 July 27th, beam was stable to reach 65uA, changed target to Loop 2 LH2.

248

	      target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15

249

	17:06 July 27th, changed target to dummy.

250

	22:06 July 27th, changed target to Loop 2 LH2.

251

252

3098    production, 04:56-09:48 July 28th, target=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15

253

254

updating readout list ......

255

Bryan added a feature to run the fixed pulser at some frequency until some number of sync events.

256

It's currently configured (ti_list.c) with the structure:

257

258

typedef struct

259

260

  int enable;       // enable (1) / disable (0)

261

  int interval;     // 1 sync event every *interval* events

262

  int pedestal;     // disable (0) / Disable after *pedestal* sync events

263

  int current;      // sync event counter for pedestal feature

264

  int pulser_arg1;  // fixed pulser argument.  Units of 120ns.

265

} TI_SYNCEVENT_CONFIG;

266

267

TI_SYNCEVENT_CONFIG tiSyncEventConfig = {1, 1000, 100, 0, 83};

268

269

using hallc_ti configuation, with new ti_list.c

270

HV is off

271

3100   pulse, HV off, beam off

272

3101   pulse, HV off, beam off

273

3102   pulse, HV off, beam off

274

275

HV is on

276

3103   pulse, HV on, beam on

277

3104   pulse, HV on, beam on

278

3105   pulse, HV on, beam on

279

280

==========================================================================

281

go back to use hallc_fadc_ssp configuration, with new ti_list.c

282

3106   production, 11:41-12:19, target_type=Loop 2 10cm LH2,shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

283

284

FADC config changed to make pedestal arround 100

285

slot 7:

286

#FADC250_ALLCH_DAC 3205 3170 3170 3195 3195 3190 3200 3195 3180 3205 3190 3215 3170 3215 3175 3205

287

FADC250_ALLCH_DAC 3150 3120 3120 3150 3150 3140 3150 3150 3130 3160 3140 3270 3120 3170 3130 3160

288

289

slot 8:

290

#FADC250_ALLCH_DAC 3500 3200 3460 3190 3220 3210 3190 3220 3220 3190 3500 3520 3510 3500 3490 3450

291

FADC250_ALLCH_DAC 3450 3150 3390 3140 3160 3150 3140 3170 3170 3130 3450 3470 3460 3450 3440 3390

292

293

3107-3111 debug daq, could be good for pedestal

294

3112  production, daq crashed, could be good for pedestal

295

296

3113  no data file, coda can not start

297

298

==========================================================================

299

Reboot tunl11 and sbsvme22

300

301

3114   production, 03:02-16:52,target_type=dummy, shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

302

       11:21, target changed to Loop 2 10cm LH2, shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

303

304

3115   production, 16:53-14:10 July 31st,target=Loop 2 10cm LH2, shms_p=7.913,shms_theta=8.68,hms_p=-2.341,hms_theta=34.15,

305

       17:14  SHMS rotated to 10.86deg, HMS rotated to 13.43deg,

306

       beam came back at 19:35, target=Loop 2 10cm LH2, shms_p=6.265,shms_theta=10.86,hms_p=-4.256,hms_theta=13.43,

307

       01:01 target changed to dummy,

308

       01:50 SHMS rotated to 8.86 deg,

309

       01:53 target changed back to Loop 2 10cm LH2, shms_p=6.265,shms_theta=8.86,hms_p=-4.256,hms_theta=13.43,

310

       05:12 target changed to dummy,

311

       06:31 target changed back to Loop 2 10cm LH2,

312

       13:12 SHMS rotated to 6.76deg, shms_p=6.265,shms_theta=6.76,hms_p=-4.256,hms_theta=13.43,

313

314

3116   production, 14:10-23:18 July 31st, target_type=Loop 2 10cm LH2,shms_p=6.265,shms_theta=6.76,hms_p=-4.256,hms_theta=13.43,I=40uA

315

       Target changed to dummp at 14:35, then changed back to Loop 2 at 15:34,

316

       17:58 SHMS angle changed to 7.91 deg, shms_p=6.538,shms_theta=7.91,hms_p=-3.944,hms_theta=17.5,I=40-65uA

317

318

3117   production, 23:18-09:24, target_type=Loop 2 10cm LH2,shms_p=6.538,shms_theta=7.91,hms_p=-3.944,hms_theta=17.5, I=40uA

319

       Target changed to dummy at 01:40, then to Loop 1 10 cm LD2 at 02:40, beam stopped at 05:00

320

321

3118   production, 09:24-21:59, target_type=Loop 1 10cm LD2,shms_p=6.538,shms_theta=7.91,hms_p=-3.944,hms_theta=17.5, I=40uA

322

3119   production, 21:59-11:40, target_type=Loop 1 10cm LD2,shms_p=6.538,shms_theta=7.91,hms_p=-3.944,hms_theta=17.5, I=40uA,

323

       SHMS rotated to 9.915deg at 5:25 20220802, after that, shms_p=6.538,shms_theta=9.91,hms_p=-3.944,hms_theta=17.5, I=50-65uA

324

325

3120   production,11:42-23:49, target_type=Loop 1 10cm LD2,shms_p=6.538,shms_theta=9.91,hms_p=-3.944,hms_theta=17.5

326

       Target changed to 10cm dummy at 17:39, then changed to Loop 2 10 cm LH2 at 18:47, this run finished at 23:49

327

328

3121   production, 23:51-08:56, target_type=Loop 2 10cm LH2,shms_p=6.538,shms_theta=9.91,hms_p=-3.944,hms_theta=17.5, I=70uA

329

       no beam for the fisrt 8 hours

330

331

GEM gas bottle might be emtpy ... need to verify from data

332

333

3122   production, 08:56-11:14, target_type=Loop 2 10cm LH2,shms_p=6.538,shms_theta=9.91,hms_p=-3.944,hms_theta=17.5, I=70uA

334

       SHMS rotated to 11.91 deg at 10:25, shms_p=6.538,shms_theta=11.91,hms_p=-3.944,hms_theta=17.5,

335

336

3123   production, 11:14-14:47, target_type=Loop 2 10cm LH2,shms_p=6.538,shms_theta=11.91,hms_p=-3.944,hms_theta=17.5, I=70uA

337

3124   production, 14:48-17:39, target_type=Loop 2 10cm LH2,shms_p=6.538,shms_theta=11.91,hms_p=-3.944,hms_theta=17.5, I=70uA

338

339

GEM HV is off

340

341

3125   production, 17:45-20:07, target_type=Loop 2 10cm LH2,shms_p=6.538,shms_theta=11.91,hms_p=-3.944,hms_theta=17.5, I=70uA

342

343

change target to dummy

344

3126   production, 20:22-21:07, target_type=dummy,shms_p=6.538,shms_theta=11.91,hms_p=-3.944,hms_theta=17.5, I=70uA

345

346

====================================================================

347

FADC slot 7.11 DAC value changed from 3270 to 3170

348

slot 7:

349

#FADC250_ALLCH_DAC 3205 3170 3170 3195 3195 3190 3200 3195 3180 3205 3190 3215 3170 3215 3175 3205

350

#FADC250_ALLCH_DAC 3150 3120 3120 3150 3150 3140 3150 3150 3130 3160 3140 3270 3120 3170 3130 3160

351

 FADC250_ALLCH_DAC 3150 3120 3120 3150 3150 3140 3150 3150 3130 3160 3140 3170 3120 3170 3130 3160

352

353

3127   production, 20:22-21:07, target_type=dummy,shms_p=6.538,shms_theta=11.91,hms_p=-3.944,hms_theta=17.5, I=70uA

354

       about 85k events only, but they are good events

355

356

changed target to Loop 1

357

358

3128   production, 21:11-22:41, target_type=Loop 1 10cm LD2,shms_p=6.538,shms_theta=11.91,hms_p=-3.944,hms_theta=17.5, I=70uA

359

3129   production, 22:42-02:35, target_type=Loop 1 10cm LD2,shms_p=6.538,shms_theta=11.91,hms_p=-3.944,hms_theta=17.5, I=70uA

360

361

changed target to Loop 2 LH2, then changed target to Loop 2 LH2.

362

HMS was rotated 20.57deg,  SHMS was rotated to 8.46deg.

363

364

365

3130   production, 02:41-08:15, target_type=Loop 2 10cm LH2,shms_p=6.719,shms_theta=8.46,hms_p=-3.716,hms_theta=20.58,

366

3131   production, 08:16-12:41, target_type=Loop 2 10cm LH2,shms_p=6.719,shms_theta=8.46,hms_p=-3.716,hms_theta=20.58,

367

3132   production, 12:41-17:03, target_type=Loop 2 10cm LH2,shms_p=6.719,shms_theta=8.46,hms_p=-3.716,hms_theta=20.58,

368

       no beam since 15:30, thunderstorems affect accelerator

369

370

changed target to dummy

371

372

3133   no beam, pedestal run, 17:05-17:05

373

3134   no beam, pedestal run, 17:07-17:07

374

3135   production, 17:11-21:06, target_type=dummy,shms_p=6.719,shms_theta=8.46,hms_p=-3.716,hms_theta=20.58,

375

       no beam for the first 100k events

376

3136   production, 17:11-23:58, target_type=dummy,shms_p=6.719,shms_theta=8.46,hms_p=-3.716,hms_theta=20.58, I=40uA

377

       no beam for the first 100k events

378

3137   production, 23:58-0:16, target_type=dummy,shms_p=6.719,shms_theta=8.46,hms_p=-3.716,hms_theta=20.58, I=40uA

379

       SHMS rotated to  10.475deg at 0:08

380

3138   production, 0:16-1:09, target_type=dummy,shms_p=6.719,shms_theta=10.475,hms_p=-3.716,hms_theta=20.58, I=40uA

381

3139   production, 1:10-02:11, target_type=dummy,shms_p=6.719,shms_theta=10.475,hms_p=-3.716,hms_theta=20.58, I=40uA

382

383

changed target to Loop 2 10cm LH2

384

385

3140   production, 2:13-8:25, target_type=Loop 2 10cm LH2,shms_p=6.719,shms_theta=10.475,hms_p=-3.716,hms_theta=20.58, I=40uA

386

3141   no beam, pedestal run

387

388

08:43 HV is off

389

10:23 HV is ON

390

391

3142   no beam, pedestal run

392

3143   no beam, pedestal run

393

394

3144   production, 14:08-21:39, target_type=Loop 2 10cm LH2,shms_p=6.719,shms_theta=10.475,hms_p=-3.716,hms_theta=20.58, I=40uA

395

       no beam during the first 100k events. Beam was on for just several minutes.

396

3145   production, 21:40-11:20, target_type=Loop 2 10cm LH2,shms_p=6.719,shms_theta=10.475,hms_p=-3.716,hms_theta=20.58, I=70uA

397

       no beam during the first 100k events. beam started at 4:05

398

3146   production, 11:20-15:44, target_type=Loop 2 10cm LH2,shms_p=6.719,shms_theta=10.475,hms_p=-3.716,hms_theta=20.58, I=70uA

399

       SHMS angle changed to 12.49 deg at 12:16

400

401

3147   production, 15:44-01:39 August 7th, target_type=Loop 2 10cm LH2,shms_p=6.719,shms_theta=12.49,hms_p=-3.716,hms_theta=20.58

402

       daq rate 1.5kHz @ I=70uA

403

       18:20 target changed to dummy

404

       22:00 target changed to Loop 2 LH2, I=70uA

405

406

407

3148   production, 01:39-07:24 August 7th, target_type=Loop 2 10cm LH2,shms_p=6.719,shms_theta=12.49,hms_p=-3.716,hms_theta=20.58

408

       beam stopped at 7:00

409

410

7:30 SHMS rotated 12.28 deg, HMS rotated to 15.06 deg, target was changed to Loop 1 10cm LD2

411

412

===================================================================

413

FADC250_W_WIDTH = 240 for both slot7 and slot8

414

415

3149   pedestal run, no beam

416

3150   pedestal run, no beam

417

3151   production, 07:34-13:32, target_type=Loop 1 10cm LD2,

418

       shms_p=-5.127,shms_theta=12.29,hms_p=-5.309,hms_theta=15.04, I=75uA

419

       From 10:47 to 11:11, target was changed to dummy (I=40uA), at

420

       11:42 target was changed back to Loop 1 10cm LD2, I=75uA

421

       At 12:42, SHMS was ratated to 14.29deg, at this angle,  daq rate 5.5kHz

422

       subrun 0-50:  SHMS=12.29deg

423

       subrun 51:  SHMS=12.29deg and 14.29deg

424

       subrun 52-60:  SHMS=14.29deg

425

426

3152   production, 13:32-17:50 August 7th, target_type=Loop 1 10cm LD2,

427

       shms_p=-5.127,shms_theta=14.29,hms_p=-5.309,hms_theta=15.04,

428

       I=75uA, daq rate 5.5kHz

429

       16:37 target changed to dummy, I=40uA

430

       17:25 target changed to Loop 1 10cm LD2, I=75uA

431

       17:42 SHMS rotated to 16.28deg, I=75uA, daq rate 5.5kHz

432

433

       subrun 0-42:  SHMS=14.29deg

434

       subrun 43:  SHMS=14.29deg and 16.28deg

435

       subrun 44-45:  SHMS=16.28deg

436

437

438

3153   production, 17:50-19:26, target_type=Loop 1 10cm LD2, shms_p=-5.127,shms_theta=16.28,hms_p=-5.309,hms_theta=15.04,I=75uA

439

440

3154   production, 19:26-00:01, target_type=Loop 1 10cm LD2, shms_p=-5.127,shms_theta=16.28,hms_p=-5.309,hms_theta=15.04,I=75uA

441

       23:35 changed to dummy target,I=40uA, daq rate 1.6kHz

442

443

3155   production, 00:02-00:33, target_type=dummy, shms_p=-5.127,shms_theta=16.28,hms_p=-5.309,hms_theta=15.04,I=40uA,

444

       daq rate 1.6kHz, beam stopped at 00:14

445

446

20220808 00:14, rotated SHMS to 16.91 deg, HMS to 19.92 deg

447

448

3156   production, 00:37-01:48, target_type=dummy,shms_p=-5.512,shms_theta=16.94,hms_p=-4.752,hms_theta=19.91,I=40uA,

449

       daq rate 1.6kHz,

450

       target changed to Loop 1 10cm LD2 at 01:16,

451

       target_type=Loop 1 10cm LD2,shms_p=-5.512,shms_theta=16.94,hms_p=-4.752,hms_theta=19.91, I=75uA

452

453

3157   production, 00:37-03:11, target_type=Loop 1 10cm LD2,shms_p=-5.512,shms_theta=16.94,hms_p=-4.752,hms_theta=19.91, I=75uA

454

       daq rate 5.6kHz

455

456

3158   production, 03:11-09:11, target_type=Loop 1 10cm LD2,shms_p=-5.512,shms_theta=16.94,hms_p=-4.752,hms_theta=19.91, I=75uA

457

       no beam for the fisrt 100k events, daq rate 5.6kHz

458

459

3159   production, 09:11-10:09, target_type=Loop 1 10cm LD2,shms_p=-5.512,shms_theta=16.94,hms_p=-4.752,hms_theta=19.91, I=75uA

460

       daq rate 5.6kHz

461

462

3160   production, 10:10-13:24, target_type=Loop 1 10cm LD2,shms_p=-5.512,shms_theta=16.94,hms_p=-4.752,hms_theta=19.91, I=75uA

463

       daq rate 5.6kHz

464

465

3161   production, 13:24-15:44, target_type=Loop 1 10cm LD2,shms_p=-5.512,shms_theta=16.94,hms_p=-4.752,hms_theta=19.91, I=75uA

466

       daq rate 5.6kHz

467

       target changed to dummy at 15:18, I=40uA

468

469

3162   production, 15:44-16:32, target_type=dummy,shms_p=-5.512,shms_theta=16.94,hms_p=-4.752,hms_theta=19.91, I=40uA

470

       beam stop at 16:03 to prepare for optic

471

472

16:09  target changed to single foil Carbon 0.5%, SHMS rotated to 6.8deg and HMS ratated to 12.5deg

473

474

3163   production, 16:32-17:22, target_type=Carbon 0.5%, shms_p=-8.55,shms_theta=6.8,hms_p=-5.587,hms_theta=12.48,I=75uA

475

       no beam for the first 100k events, daq rate 160Hz

476

477

Target move to Optics 1 +/- 8cm, 2 Foils Carbon

478

479

3164   production, 17:22-17:47, target_type=Optics 1 z=+/-8cm, 2 Foil, shms_p=-8.55,shms_theta=6.8,hms_p=-5.587,hms_theta=12.48,I=50uA

480

       no beam for the first 100k events, daq rate 80Hz

481

482

3165   production, 17:47-18:02, target_type=Optics 1 z=+/-8cm, 2 Foil, shms_p=-8.55,shms_theta=6.8,hms_p=-5.587,hms_theta=12.48,I=50uA

483

       only 30k triggers

484

485

18:00  target changed to Loop 2 10cm LH2

486

487

3166   production, 18:05-18:57, target_type=Loop2 10cm LH2, shms_p=-8.55,shms_theta=6.8,hms_p=-5.587,hms_theta=12.48,

488

       I=60uA (18:06), then 20uA(18:08) then 10uA(18:10)

489

       daq rate 130Hz @20uA, 65Hz @10uA

490

       SHMS rotated to 7.5deg at 18:28, shms_p=-8.55,shms_theta=7.5,hms_p=-5.587,hms_theta=12.48,I=15uA

491

492

18:57  Target changet to Optics 1 +/- 8 cm

493

3167   production, 18:59-19:37, target_type=Optics 1 z=+/-8cm, shms_p=-8.55,shms_theta=7.5,hms_p=-5.587,hms_theta=12.48,I=50uA

494

       daq rate 90Hz @50uA

495

       target changed to Carbon 0.5% at 19:20, I=75uA

496

497

19:38  SHMS rotated to 8.3 deg

498

499

3168   production, 19:39-19:54, target_type=Carbon 0.5%, shms_p=-8.55,shms_theta=8.3,hms_p=-5.587,hms_theta=12.48,I=75uA

500

501

19:54  Target changet to Optics 1 +/- 8 cm

502

503

3169   production, 19:54-20:34, target_type=Optics 1 z=+/-8cm, shms_p=-8.55,shms_theta=8.3,hms_p=-5.587,hms_theta=12.48,I=50uA

504

       no beam for the first 100k events,

505

       daq rate 90Hz @50uA

506

       20:24 target changed to Loop 2 10cm LH2, beam came back at 20:29

507

508

3170   production, 20:34-21:23, target_type=Loop 2 10cm LH2, shms_p=-8.55,shms_theta=8.3,hms_p=-5.587,hms_theta=12.48,I=20uA

509

       daq rate 160Hz @20uA, beam stopped at 21:06

510

511

===================================================

512

HV map for FTBF beam test

513

514

HV for FADC channel 0 to 7:

515

#   #   SDU#4 SDU#5 THU#2 SDU#2 SDU#1 THU#1

516

SC1 SC2 Ecal1 Ecal2 Ecal3 PrSh1 PrSh2 PrSh3

517

-1260 -1280 -760 -860 -880 -1640 -1480 -1800 <<== 1~8GeV

518

519

This setting was also used for some 1GeV calibrations

520

-1260 -1300 -880 -920 -940 -1640 -1440 -1800 <<== <1GeV

521

522

---------------------------------------

523

4GeV calibration start

524

1009 Moved table to (1505, 337), center on the left block 51,563 events

525

1010 Moved table to (1389, 337), center on the right block 77621 events

526

1011 Moved table to (1447, 243), center on the top block 52034 events

527

4GeV calibration end

528

---------------------------------------

529

530

531

---------------------------------------

532

1GeV calibration start, MWPC 1 is not working

533

796 move to Top block, use this New HV: 1260, 1300, 880, 920, 940, 1640, 1440, 1800, FADC ch11 and ch12 swapped.

534

These two channels are down stream Cherenkov. After swapped, Down cherenkov inner PMT is in ch12.

535

536

537

798 move to left block, point B (1498,347)

538

539

800 beam on the center of the left block, point B

540

541

802 beam on the center of the right block, point C (1382,347)

542

543

803 beam on the center of the top block, point A (1440, 252)

544

1GeV calibration end

545

---------------------------------------

546

=====================================================

547

548

-----------------------------------------------

549

change HV to the same as FermiLab

550

#     #    SDU#4 SDU#5 THU#2 SDU#2 SDU#1 THU#1

551

SC1   SC2  Ecal1 Ecal2 Ecal3 PrSh1 PrSh2 PrSh3

552

-1260 -1280 -760  -860  -880 -1640 -1480 -1800 <<== 1~8GeV

553

===>

554

555

slot10.7(SDU#1) slot10.8(THU#1) slot10.9(SDU#2)

556

-1480           -1800           -1640

557

558

slot2.0(SDU#4)  slot2.1(THU#2)  slot2.2(SDU#5)

559

-760            -880            -860

560

-----------------------------------------------

561

562

21:40 SHMS rotated to 12.25deg, HMS rotated to 15.7deg

563

564

-----------------------------------------------

565

566

22:11 target changed to dummy

567

568

3171    production, 22:10-22:21,target_type=dummy,shms_p=-8.035,shms_theta=12.25,hms_p=-6.792,hms_theta=15.69,I=40uA

569

	no beam at the first 100k triggers

570

571

22:34   SHMS rotated to 13.15deg, HMS rotated to 17.72deg

572

573

3172    production, 22:22-23:22,target_type=dummy,shms_p=-8.035,shms_theta=13.15,hms_p=-6.792,hms_theta=17.72,

574

	no beam at the first 100k triggers, beam came at 22:32.  only 9 minutes of dummy data

575

	22:41 stopped beam to changed target to Loop 2 10cm LH2

576

	22:46 beam came back and then went away at 22:53 due to HMS Q1 interlock,

577

	23:12 beam came back again, shms_p=-8.035,shms_theta=13.15,hms_p=-6.792,hms_theta=17.72, I=60uA,

578

	daq rate 1.1kHz, 10 minutes of LH2 data

579

580

3173   production, 23:22-23:52 August 8th,

581

       target=Loop 2 10cm LH2, shms_p=-8.035,shms_theta=13.15,hms_p=-6.792,hms_theta=17.72, I=60uA

582

       daq rate 1.1kHz

583

       beam stopped at 23:38 then SHMS rotated to 14.02 deg and HMS rotated to 19.86deg

584

       beam came back at 23:49, I=75uA, shms_p=-8.035,shms_theta=14.02,hms_p=-6.792,hms_theta=19.86,

585

586

       subrun 0:  SHMS=13.15deg

587

       subrun 1:  SHMS=13.15deg and 14.02deg

588

589

590

3174   production, 23:52-02:03 August 9th,

591

       target=Loop 2 10cm LH2, shms_p=-8.035,shms_theta=14.02,hms_p=-6.792,hms_theta=19.86, I=75uA

592

       daq rate 1.9kHz

593

       0:51 target changed to dummy, I=40uA,

594

       01:16 SHMS rotated to 14.895deg,	shms_p=-8.035,shms_theta=14.9,hms_p=-6.792,hms_theta=19.86, I=75uA

595

       01:45 target changed to Loop 2 LH2, beam came back at 01:49 but stopped at 01:58

596

       subrun 0-3 are for 14.02 deg SHMS

597

       subrun 4 are for both 14.02 and 14.9 deg SHMS

598

       subrun 5-6 are for 14.9 deg SHMS

599

600

601

3175   production, 02:03-08:35,target=Loop 2 10cm LH2, shms_p=-8.035,shms_theta=14.9,hms_p=-6.792,hms_theta=19.86,I=75uA

602

       no beam at the first 100k triggers,beam came back at 03:18,

603

       04:45, SHMS rotated to 15.785deg, shms_p=-8.035,shms_theta=15.79,hms_p=-6.792,hms_theta=19.86,I=70uA

604

       06:05, target changed to dummy, I=40uA, took 8 minutes of data

605

       06:25, SHMS rotated to 13.58deg, took 8 minutes of data for dummy, I=40uA,

606

       06:47, changed target to Loop2 LH2, shms_p=-7.913,shms_theta=13.58,hms_p=-6.792,hms_theta=19.86,

607

       08:00, SHMS rotated to 12.69deg, took 4 minutes of data till beam stopped at 08:04 to change pass,

608

       shms_p=-8.035,shms_theta=12.69,hms_p=-6.792,hms_theta=16.03,I=70uA

609

610

==============================================================================================================

611

Aug 9th 08:05 Accelerator changed beam from 5-pass to 4-pass for Hall C. Beam energy is 8.494GeV

612

613

3176   pedestal, 100k pulse triggers, no beam

614

3177   pedestal, 100k pulse triggers, no beam

615

616

08:48 HMS rotated to 20.905deg, SHMS rotated to 6.93deg

617

618

619

3178   production, 09:02-15:08, target=Loop 2 LH2, shms_p=6.265,shms_theta=6.93,hms_p=-2.193,hms_theta=20.89,

620

       no beam at the first 100k triggers,beam came back at 14:02,

621

       14:00 target changed to Carbon Hole, I=5uA for 6 minutes,

622

       14:18 target changed to Loop 2 LH2, I=35uA, beam came back at 14:20, daq rate 220Hz, beam stopped at 14:46

623

624

3179   production, 15:09-21:31, target=Loop 2 10cm LH2, shms_p=6.265,shms_theta=6.93,hms_p=-2.193,hms_theta=20.89,

625

       no beam at the first 100k triggers,beam came back at 17:31, I=60uA

626

627

22:37  target changed to dummy

628

629

3180   production, 21:31-22:28, target=dummy, shms_p=6.265,shms_theta=6.93,hms_p=-2.193,hms_theta=20.89

630

       no beam for the first 100k triggers,

631

       21:35 beam arrived, beam current linear ran up from 3uA to 23uA at 21:55 to do Ion Chamber calibration

632

       From 21:56, I=40UA till 22:15

633

       22:15  SHMS rotated to 8.93 deg, beam came back at 22:20

634

       target=dummy, shms_p=6.265,shms_theta=8.93,hms_p=-2.193,hms_theta=20.89

635

636

3181   production, 22:28-22:44, target=dummy, shms_p=6.265,shms_theta=8.93,hms_p=-2.193,hms_theta=20.89

637

638

22:46  target changed to Loop 2 LH2

639

640

3182   production, 22:48-00:05 August 10th,

641

       target=Loop 2 10cm LH2, shms_p=6.265,shms_theta=8.93,hms_p=-2.193,hms_theta=20.89, I=80uA

642

       no beam for the first 100k triggers,daq rate 770Hz

643

644

3183   production, 00:05-01:22,

645

       target=Loop 2 10cm LH2, shms_p=6.265,shms_theta=8.93,hms_p=-2.193,hms_theta=20.89, I=80uA

646

       daq rate 770Hz, beam stopped at 00:49 due to Vacuum issue at VBV3H08A

647

648

3184   pedestal, pulse run, 01:23-10:26, no beam for the whole run,1000006 events

649

3185   pedestal, pulse run, 11:29-11:29, no beam

650

=========================================================================================

651

Add "PreSh_t && Shower_t" into TS#2, 20220810

652

653

3186   pedestal, pulse run, 14:54-15:19, no beam

654

3187   pedestal, pulse run, 15:47-15:47, no beam

655

656

16:00   SHMS rotated to 5.5 deg.

657

658

3188   production, 17:21-23:07, target=Loop 2 10cm LH2, shms_p=6.265,shms_theta=5.53,hms_p=-2.193,hms_theta=20.89,

659

       no beam for the sirst 100k triggers, tune beam arrived at 17:52, real beam arrived at 21:34

660

661

23:09 Changed FADC slot8.9 DAC value from 3130 to 3440.  After feed it into FIFO, its pedestal changed

662

663

3189  production,23:10-02:38 August 11th,

664

      target=Loop 2 LH2, shms_p=6.265,shms_theta=5.53,hms_p=-2.193,hms_theta=20.89,I=30uA

665

      daq rate 320Hz

666

667

3190  production,02:38-04:38, target=Loop 2 LH2, shms_p=6.265,shms_theta=5.53,hms_p=-2.193,hms_theta=20.89,I=30uA

668

      daq rate 320Hz

669

      03:05 target changed to dummy, I=40uA

670

      03:45 HMS rotated to 28.41deg,

671

      target=dummy,shms_p=6.538,shms_theta=5.53,hms_p=-1.882,hms_theta=28.41, I=40uA, daq rate 320Hz

672

673

3191  production, 04:39-09:03, target=dummy,shms_p=6.538,shms_theta=5.53,hms_p=-1.882,hms_theta=28.41,

674

      I=40uA, daq rate 320Hz

675

      4:50 target chagned to Loop 2 LH2, I=35uA

676

      target=Loop 2 LH2, shms_p=6.265,shms_theta=5.53,hms_p=-2.193,hms_theta=28.41,I=35uA

677

      Acceleration maintenence started from 6:30

678

679

3192  production, 19:55-01:52 August 12th, target=Loop 2 LH2,shms_p=6.538,shms_theta=5.53,hms_p=-1.882,hms_theta=28.41,

680

      no beam for the first 100k triggers, tune beam came back at 23:32

681

682

3193  production, 01:52-09:28, target=Loop 2 LH2,shms_p=6.538,shms_theta=5.53,hms_p=-1.882,hms_theta=28.41,

683

      daq rate = 400Hz @ I=38uA. Beam stopped at 09:10

684

685

09:21 A beam energy measurement is scheduled at 9:30-ish AM. Target parked at 'home'.

686

11:29 Target changed to Loop 2 LH2

687

688

3194  production, 11:35-12:26, target=Loop 2 LH2,shms_p=6.538,shms_theta=5.53,hms_p=-1.882,hms_theta=28.41,

689

      no beam for the first 100k triggers, beam came back at 11:50 and went away at 12:01

690

691

3195  production, 14:05-14:41, target=Loop 2 LH2,shms_p=6.538,shms_theta=5.53,hms_p=-1.882,hms_theta=28.41,

692

      daq rate = 400Hz @ I=38uA.

693

694

3196  production, 14:42-16:46, target=Loop 2 LH2,shms_p=6.538,shms_theta=5.53,hms_p=-1.882,hms_theta=28.41,

695

       no beam for the first 100k triggers, beam came back at 14:49

696

       beam stopped at 16:12

697

698

3197  production, 16:49-00:54 August 13th, target=Loop 2 LH2,

699

      shms_p=6.538,shms_theta=5.53,hms_p=-1.882,hms_theta=28.41,

700

       no beam for the first 100k triggers, beam came back at 17:48

701

702

703

3198  production, 00:54-02:28, target=Loop 2 LH2,shms_p=6.538,shms_theta=5.53,hms_p=-1.882,hms_theta=28.41,

704

      daq rate = 450Hz @ I=40uA.

705

      01:09 SHMS rotated to 7.47 deg, trying to ramp beam current up to 80uA

706

      subrun 0: 5.53deg and 7.47deg

707

      subrun 1-3: 7.47deg

708

709

710

3199  production, 02:28-12:05, target=Loop 2 LH2,shms_p=6.538,shms_theta=7.47,hms_p=-1.882,hms_theta=28.41,

711

      daq rate = 1024Hz @ I=79uA.

712

713

3200  production, 12:05-14:42, target=Loop 2 LH2,shms_p=6.538,shms_theta=7.47,hms_p=-1.882,hms_theta=28.41,

714

      daq rate = 1024Hz @ I=79uA.

715

      14:28 target changed to dummy, I=40uA, daq rate 320Hz

716

717

3201  production, 14:42-16:01, target=dummy,shms_p=6.538,shms_theta=7.47,hms_p=-1.882,hms_theta=28.41,

718

      I=40uA, daq rate 320Hz

719

720

16:01 SHMS rotated to 9.5deg, target changed to Loop 2 LH2

721

722

3202  production, 14:01-17:29, target=Loop 2 LH2,shms_p=6.538,shms_theta=9.5,hms_p=-1.882,hms_theta=28.41,

723

      no beam for the first 100k triggers, beam came back 16:04

724

      daq rate = 1024Hz @ I=79uA.

725

      beam stopped at 17:13, 4th pass separation issue

726

727

3203  production, 17:37-00:35 August 14th, target=Loop 2 LH2,shms_p=6.538,shms_theta=9.5,hms_p=-1.882,hms_theta=28.41,

728

      no beam for the first 100k triggers, beam came back 17:41

729

      daq rate 1.5kHz @ I=80uA

730

731

3204  production, 00:35-03:53 August 14th, target=Loop 2 LH2,shms_p=6.538,shms_theta=9.5,hms_p=-1.882,hms_theta=28.41,

732

      daq rate 1.5kHz @ I=80uA

733

      03:31 target changed to dummy, I=40uA

734

735

3205  production, 03:53-04:13, target=dummy,shms_p=6.538,shms_theta=9.5,hms_p=-1.882,hms_theta=28.41,

736

      I=40uA, daq rate 512Hz

737

738

3206  production, 04:13-04:31, target=dummy,shms_p=6.538,shms_theta=9.5,hms_p=-1.882,hms_theta=28.41,

739

      I=40uA, daq rate 512Hz

740

741

04:38 target changed to Loop 2 LH2

742

04:50 SHMS rotated to 8.93 deg, HMS rotated to 20.89deg

743

744

3207  production, 05:01-13:02, target=Loop 2 LH2,shms_p=6.265,shms_theta=8.93,hms_p=-2.193,hms_theta=20.89,

745

      no beam for the first 100k triggers, beam came back 7:35, I=80uA

746

      beam stopped at 10:32, then came back at 12:15

747

      ~11:00  SHMS rotated to 30.02deg, HMS rotated to 19.56deg

748

      target=Loop 2 LH2,shms_p=3.731,shms_theta=30.02,hms_p=-5.587,hms_theta=19.56

749

      ---> SHMS=8.93deg for subrun 0-3, SHMS=30.02deg for subrun 5 to 10, subrun 4 contains both angles <---

750

751

3208  production, 13:02-13:14, target=Loop 2 LH2,shms_p=3.731,shms_theta=30.02,hms_p=-5.587,hms_theta=19.56,I=80uA

752

      At 13:07, target changed to dummy, I=40uA.  Only 2 minutes of LH2 target then 2 minutes of dummy target

753

754

3209  production, 13:14-13:25, target=dummy,shms_p=3.731,shms_theta=30.02,hms_p=-5.587,hms_theta=19.56,

755

      daq rate 1.5kHz @ I=40uA

756

757

3210  production, 13:25-13:30, target=dummy,shms_p=3.731,shms_theta=30.02,hms_p=-5.587,hms_theta=19.56,

758

      daq rate 1.5kHz @ I=40uA, only 2 minutes of data then beam stopped for target change

759

760

13:32 target changed to Loop 2 LH2,

761

13:32 SHMS rotated to 28.355deg. HMS rotated to 20.905deg

762

763

3211  production, 13:33-13:44, target=Loop 2 LH2, shms_p=3.996,shms_theta=28.40,hms_p=-5.321,hms_theta=20.91,

764

      daq rate 1.8kHz @ I=80uA, beam stopped at 13:41

765

766

3212  production, 13:45-14:39, target=Loop 2 LH2, shms_p=3.996,shms_theta=28.40,hms_p=-5.321,hms_theta=20.91,

767

      daq rate 1.8kHz @ I=80uA,

768

      I stopped coda at 13:44 for previous run because HallC coda was stopped at 13:41 in order to adjust

769

      SHMS angle from 28.44 to 28.355.

770

      I was taking data during this adjustment. This change should not affect the ecal setup.

771

772

14:40 target changed to dummy

773

774

3213  production, 14:41-14:58. target=dummy, shms_p=3.996,shms_theta=28.355,hms_p=-5.321,hms_theta=20.91,

775

      I=40uA, daq rate 620Hz

776

777

778

15:00 target changed to Loop 2 LH2,

779

15:30 Set HMS angle to 15.065 and SHMS angle to 9.455 deg, but stayed at 15.05 deg and 9.53deg

780

781

3214  production, 15:01-17:03, target=Loop 2 LH2, shms_p=-7.559,shms_theta=9.53,hms_p=-6.477,hms_theta=15.05,

782

      no beam for the first 100k triggers, beam came back 15:37, I=20uA

783

      15:51 target changed to dummy,shms_p=-7.559,shms_theta=9.53,hms_p=-6.477,hms_theta=15.05,

784

      16:38 SHMS rotated to 11.97 deg,HMS rotated to 15.62 deg

785

      target=dummy, shms_p=-7.106,shms_theta=11.97,hms_p=-5.878,hms_theta=15.62,

786

      17:02 target changed to Loop 2 LH2, shms_p=-7.106,shms_theta=11.97,hms_p=-5.878,hms_theta=15.62,

787

      subrun 0: SHMS=9.455deg and 11.97deg

788

      subrun 1: SHMS=11.97deg

789

790

3215  production, 17:05-17:50, target=Loop 2 LH2, shms_p=-7.106,shms_theta=11.97,hms_p=-5.878,hms_theta=15.62,

791

      no beam for the first 100k triggers, beam came back at 15:11, I=10uA,

792

      beam went away at 17:24 due to injector problem, only 3~4 minutes of beam in this run, 175k events

793

794

3216  production, 17:57-19:49, target=Loop 2 LH2, shms_p=-7.106,shms_theta=11.97,hms_p=-5.878,hms_theta=15.62,

795

      no beam for the first 100k triggers, beam came back at 18:17, I=10uA till 18:45

796

      18:47 SHMS rotated to 13.92, HMS rotated to 17.96deg, beam came at 19:13, I=55uA

797

      target=Loop 2 LH2, shms_p=-6.72,shms_theta=13.92,hms_p=-5.878,hms_theta=17.96,

798

      subrun 0: SHMS=11.97deg and 13.92deg

799

      subrun 1-4: SHMS=13.92deg

800

801

3217  production, 19:49-19:54, target=Loop 2 LH2, shms_p=-6.72,shms_theta=13.92,hms_p=-5.878,hms_theta=17.96,

802

      beam stopped at 19:51, only 256k events

803

804

19:56 target changed to dummy

805

806

3218  production, 19:57-20:11, target=dummy, shms_p=-6.72,shms_theta=13.92,hms_p=-5.878,hms_theta=17.96,

807

808

20:12 SHMS rotated to 14.82 deg, HMS rotated to 20.37deg

809

810

3219  production, 20:13-20:36, target=dummy, shms_p=-6.538,shms_theta=14.82,hms_p=-5.878,hms_theta=20.37,

811

      no beam for the first 100k triggers, beam came back at 20:20, I=40uA, daq rate 1920Hz

812

813

20:35 target changed to Loop 2 LH2

814

815

3220  production, 20:40:21:16, target=Loop 2 LH2, shms_p=-6.538,shms_theta=14.82,hms_p=-5.878,hms_theta=20.37,

816

      no beam for the first 100k triggers, beam came back at 20:42, I=80uA,

817

      beam stopped at 21:12 to prepare optics runs

818

819

21:18 HMS rotated to 13 deg, target changed to Carbon 0.5%

820

821

3221  production, 21:16-22:05, target=Carbon 0.5%,

822

      Sieve Optics,shms_p=-6.538,shms_theta=14.82,hms_p=-5.878,hms_theta=12.98,

823

      no beam for the first 100k triggers, beam came back at 21:30,

824

      I=4.5uA --> daq rate 64Hz,

825

      I=13uA --> daq rate 192Hz,

826

      I=80uA --> daq rate 1216Hz,

827

      22:02 target changed to optics 1, Carbon +/- 8cm, I=3uA

828

829

830

3222  production, 22:05-23:21, target=Opitcs 1, Carbon 2-foils +/- 8cm,

831

      Sieve Optics,shms_p=-6.538,shms_theta=14.82,hms_p=-5.878,hms_theta=12.98,

832

      ramp currunet from 2uA till 40 uA

833

      I= 10uA --> daq rate 128Hz

834

      I= 15uA --> daq rate 192Hz

835

      I= 20uA --> daq rate 256Hz

836

      I= 49.5uA --> daq rate 576Hz

837

838

23:24  target changed to Loop LH2

839

23:30  SHMS rotated to 16.100deg, HMS rotated to 17.235deg

840

841

3223  production, 23:27-00:06, target=Loop 2 LH2, shms_p=-6,shms_theta=16.17,hms_p=-5.587,hms_theta=17.23,

842

      no beam for the first 100k triggers, beam came back 23:47,

843

      daq rate is 1.2kHz @ I=25uA

844

845

3224  production, 00:06-00:30, target=Loop 2 LH2, shms_p=-6,shms_theta=16.17,hms_p=-5.587,hms_theta=17.23,

846

      daq rate is 1.280Hz @ I=25uA

847

848

00:30 target changed to dummy

849

850

3225  production, 00:32-01:24, target=dummy, shms_p=-6,shms_theta=16.17,hms_p=-5.587,hms_theta=17.23,

851

      no beam for the first 100k triggers, beam came back 00:35,not staple until 00:42

852

      daq rate 1.8 kHz @ I=40uA

853

854

3226  production, 01:24-01:36, target=dummy, shms_p=-6,shms_theta=16.17,hms_p=-5.587,hms_theta=17.23,

855

856

01:38 SHMS rotated to 19.20deg,  HMS rotated to 19.505deg

857

858

3227  production, 01:39-03:02, target=dummy, shms_p=-5.646,shms_theta=19.28,hms_p=-5.587,hms_theta=19.5,

859

      no beam for the first 100k triggers, beam came back 02:42,

860

861

03:05 changed target to Loop 2 LH2

862

863

3228  production, 03:04-03:48, target=Loop 2 LH2,shms_p=-5.646,shms_theta=19.28,hms_p=-5.587,hms_theta=19.5,

864

      daq rate 3.7 kHz @ I=73uA

865

      daq rate 3.9 kHz @ I=77uA

866

867

03:51 SHMS Rotated to 23.3 degrees, HMS Rotated to 21.875 degrees

868

869

3229  production, 03:53-5:44, target=Loop 2 LH2, shms_p=-4.902,shms_theta=23.2,hms_p=-5.587,hms_theta=21.875,

870

      no beam for the first 100k triggers, beam came back at 04:37,

871

      daq rate 3.9 kHz @ I=77uA

872

873

05:45 changed target to dummy

874

875

3230  production, 05:48-06:04, target=dummy, shms_p=-4.902,shms_theta=23.2,hms_p=-5.587,hms_theta=21.875,

876

      no beam for the first 100k triggers, beam came back at 05:53, stopped at 5:58

877

      daq rate 1.8 kHz @ I=40uA

878

879

3231  production, 6:06-06:18, target=dummy, shms_p=-4.902,shms_theta=23.2,hms_p=-5.587,hms_theta=21.875,

880

      daq rate 1.8 kHz @ I=40uA

881

882

06:18  Rotated SHMS to 25.1 deg, rotated HMS to 40 deg, change momenta for both of them,

883

884

3232  pedestal run, internal pulse, no beam since 06:18

885

      Something went wrong, Hall C configuration change could not finish within 45 minutes and further more

886

      the injector has some problem. HallC has been scheduled a controlled access up to six hours from 8AM

887

      for the aerogel exchange.

888

889

11:46 target changed to Loop 2 LH2

890

12:40 SHMS rotated to 18.9deg, HMS rotaed to 12.11deg

891

892

3233  production, 13:36-14:03, target=Loop 2 LH2, shms_p=2.792,shms_theta=18.9,hms_p=-5.587,hms_theta=12.11,

893

      daq rate 4.0 kHz @ I=79uA

894

895

3234  production, 14:03-15:10, target=Loop 2 LH2, shms_p=2.792,shms_theta=18.9,hms_p=-5.587,hms_theta=12.11,

896

      daq rate 3.9 kHz @ I=77uA

897

898

3235  production, 15:11-15:53, target=Loop 2 LH2, shms_p=2.792,shms_theta=18.9,hms_p=-5.587,hms_theta=12.11,

899

900

3236  production, 15:53-16:15, target=Loop 2 LH2, shms_p=2.792,shms_theta=18.9,hms_p=-5.587,hms_theta=12.11,

901

902

3237  production, 16:16-17:58, target=Loop 2 LH2, shms_p=2.792,shms_theta=18.9,hms_p=-5.587,hms_theta=12.11,

903

      no beam for the first 100k triggers, beam came back at 16:40,

904

      daq rate 4.0 kHz @ I=79uA

905

906

18:00 changed target to dummy

907

908

3238  production, 18:02-18:16, target=dummy, shms_p=2.792,shms_theta=18.9,hms_p=-5.587,hms_theta=12.11,

909

      no beam for the first 100k triggers, beam came back at 18:04,

910

      daq rate 1.9 kHz @ I=40uA

911

912

3239  production, 18:17-19:09, target=dummy, shms_p=2.792,shms_theta=18.9,hms_p=-5.587,hms_theta=12.11,

913

      daq rate 1.9 kHz @ I=40uA

914

915

19:10 target changed to Loop 2 10 cm LH2

916

19:12 SHMS rotated to 21.22deg

917

918

3240  production, 19:14-20:38, target=Loop 2 LH2, shms_p=2.792,shms_theta=21.22,hms_p=-5.587,hms_theta=12.11,

919

      daq rate 4.0 kHz @ I=79uA

920

921

3241  production, 20:39-21:41, target=Loop 2 LH2, shms_p=2.792,shms_theta=21.22,hms_p=-5.587,hms_theta=12.11,

922

      daq rate 4.0 kHz @ I=79uA

923

      21:35 target changed to dummy, beam came back at 21:40,

924

      the last one minutes is dummy events, I=40uA, daq rate 1.8kHz

925

926

3242  production, 21:41-22:14, target=dummy, shms_p=2.792,shms_theta=21.22,hms_p=-5.587,hms_theta=12.11,

927

       I=40uA, daq rate 1.8kHz

928

929

22:15 target changed to Loop 2 LH2, SHMS rotated to 23.215deg, actually it is 22.9deg

930

931

3243  production, 22:17-23:28, target=LH2, shms_p=2.792,shms_theta=22.9,hms_p=-5.587,hms_theta=12.11,

932

      I=76uA, daq rate 3.9kHz

933

934

3244  production, 23:28-00:05, target=LH2, shms_p=2.792,shms_theta=22.9,hms_p=-5.587,hms_theta=12.11, I=80uA

935

      23:35 beam stopped, changed to dummy target, beam came back at 23:44, I=40uA

936

      subrun 0 -->  LH2

937

      subrun 1 -->  part LH2 and part dummy

938

      subrun 2 -->  dummy

939

940

00:11 SHMS rotated to 21.22 deg on camera(true angle is 20.9 after subtracting offset), target changed to LH2

941

      The SHMS angle in HallC log is 22.17, that is a typo

942

943

3245  production, 00:05-00:51, target=LH2, shms_p=2.792,shms_theta=20.9,hms_p=-5.587,hms_theta=12.11

944

      no beam for the first 100k triggers, beam came back at 00:16,

945

      beam went away at 00:25 due to accelerator issue, 129k events

946

947

3246 production, 00:59-04:21, target=LH2, shms_p=2.792,shms_theta=20.9,hms_p=-5.587,hms_theta=12.11

948

     no beam for the first 100k triggers, beam came back at 03:15,

949

     1kHz @ I=20uA

950

     3.2kHz @ I=65uA

951

952

3247 production, 04:21-05:02, target=LH2, shms_p=2.792,shms_theta=20.9,hms_p=-5.587,hms_theta=12.11

953

     1.4kHz @ I=29uA

954

955

05:03 changed to dummy target

956

957

3248 production, 05:07-05:36, target=dummy, shms_p=2.792,shms_theta=20.9,hms_p=-5.587,hms_theta=12.11

958

     1.4kHz @ I=30uA

959

960

961

3249 production, 05:37-10:28, target=dummy, shms_p=2.792,shms_theta=20.9,hms_p=-5.587,hms_theta=12.11

962

     no beam for the first 100k triggers, beam came back at 5:55 last till 6:03.

963

     Since 6:03, HMS Q1 was tripped, Hall C could not take beam.

964

     06:37 target changed to LH2

965

     08:03, beam was back again, I=12uA, target=LH2, shms_p=2.792,shms_theta=20.9,hms_p=-5.587,hms_theta=12.11,

966

     09:10, beam stopped for pass changed

967

     subrun 0 has both dummy and LH2 target

968

     subrun 1 and 2 are for LH2 target only

969

970

971

=======================================================================================================

972

09:15 August 16th, started to change to 3-pass beam , E = 6.399 GeV

973

974

09:30 SHMS rotated to 17.91 deg, camera shows 18.23 due to the encoder offset 0.32.

975

976

12:00 Reset SHMS angle offset to zero so the camera shows the same value as the encoder.

977

      Set the SHMS to 17.86 degrees and the HMS to 18.31.

978

3250  pedestal, pulse run, cosmic 12:42 August 16th - 12:05 August 17th, 100203 events

979

3251  pedestal, pulse run, cosmic, 12:41-14:38,  1000021 events

980

981

memeory upgraded to 24G in daq machine tunl11.jlab.org

982

983

tune beam came back to Hall C

984

17:17 target changed to carbon hole

985

986

3252 16:58-17:04 pedestal, pulse run,

987

3253-3255  debug daq, trash

988

989

17:48 target changed to Loop2 LH2

990

991

3256 17:52-18:01 pedestal, pulse run, debug daq, good for pedestal only

992

993

994

3257  production, 18:08-18:16, target=LH2,shms_p=2.412,shms_theta=17.86,hms_p=-3.921,hms_theta=13.81,

995

996

3258  production, 18:22-19:35, target=LH2,shms_p=2.412,shms_theta=17.86,hms_p=-3.921,hms_theta=13.81,

997

      daq rate 1152Hz @ I=25uA

998

      daq rate 2.3kHz @ I=50uA

999

1000

19:36 target changed to dummy

1001

1002

3259  production, 19:36-20:02, target=dummy,shms_p=2.412,shms_theta=17.86,hms_p=-3.921,hms_theta=13.81,

1003

      no beam for the first 100k triggers, beam came back at 19:40,

1004

      daq rate 1664Hz @ I=40uA

1005

1006

20:02 SHMS rotated to 19.86 deg

1007

1008

3260  production, 20:03-20:24, target=dummy, shms_p=2.412,shms_theta=19.86,hms_p=-3.921,hms_theta=13.81,

1009

      no beam for the first 100k triggers, beam came back at 20:07,

1010

      daq rate 1664Hz @ I=40uA

1011

1012

20:24 target changed to LH2

1013

1014

3261  production, 20:26-20:35, target=LH2, shms_p=2.412,shms_theta=19.86,hms_p=-3.921,hms_theta=13.81,

1015

      no beam for the first 100k triggers, beam came back at 20:28,

1016

1017

3262  production, 20:42-21:01, target=Loop 2 LH2, shms_p=2.412,shms_theta=19.86,hms_p=-3.921,hms_theta=13.81,

1018

      daq rate 2.7kHz @ I=60uA

1019

1020

3263  production, 21:03-21:39, target=Loop 2 LH2, shms_p=2.412,shms_theta=19.86,hms_p=-3.921,hms_theta=13.81,

1021

      no beam for the first 100k triggers, beam came back at 21:16,

1022

      daq rate 2.7kHz @ I=60uA

1023

1024

3264  production, 21:39-21:52, target=Loop 2 LH2, shms_p=2.412,shms_theta=19.86,hms_p=-3.921,hms_theta=13.81,

1025

      daq rate 2.7kHz @ I=60uA

1026

1027

3265  production, 21:54-22:23, target=Loop 2 LH2, shms_p=2.412,shms_theta=19.86,hms_p=-3.921,hms_theta=13.81,

1028

      daq rate 2.8kHz @ I=60uA

1029

1030

-------- 22:25 SHMS spectrometer change to 21.85-------------

1031

1032

3266  production, 22:28-22:47, target=Loop 2 LH2, shms_p=2.412,shms_theta=21.85,hms_p=-3.921,hms_theta=13.81,

1033

      daq rate 3.2kHz @ I=70uA. Note, it seems they were pushing to reach 80 uA, so the current and rate is may         fluctuate

1034

3267  production, 22:47-23:14, target=Loop 2 LH2, shms_p=2.412,shms_theta=21.85,hms_p=-3.921,hms_theta=13.81

1035

      daq rate 3.6kHz @ I=80uA

1036

      no beam for the first 100k triggers, beam came back at 22:49

1037

3268  production, 23:15-23:43, target=Loop 2 LH2, shms_p=2.412,shms_theta=21.85,hms_p=-3.921,hms_theta=13.81

1038

      daq rate 3.6kHz @ I=80uA

1039

3269  production, 23:43-23:55, target=Loop 2 LH2, shms_p=2.412,shms_theta=21.85,hms_p=-3.921,hms_theta=13.81

1040

      daq rate 3.6kHz @ I=80uA

1041

3270  production, 23:56-24:04, target=Loop 2 LH2, shms_p=2.412,shms_theta=21.85,hms_p=-3.921,hms_theta=13.81

1042

      daq rate 3.60kHz @ I=0uA

1043

      no beam for the first 100k triggers, beam was off for 10 minutes due to accelerator issues

1044

1045

3271  production, 00:07-00:15, target=Loop 2 LH2, shms_p=2.412,shms_theta=21.85,hms_p=-3.921,hms_theta=13.81

1046

      daq rate 3.6kHz @ I=80uA

1047

1048

---------- 00:20 Switch target to Dummy ---------

1049

1050

3272  production, 00:19-00:45, target=10 cm Dummy, shms_p=2.412,shms_theta=21.85,hms_p=-3.921,hms_theta=13.81

1051

      no beam for the first 100k triggers, beam returned at 00:24

1052

      daq rate 1.6kHz @ I=40uA

1053

1054

---------00:50 Switch target to LH2-------

1055

1056

3273  production, 00:56-02:22, target=Loop 2 LH2, shms_p=2.412,shms_theta=21.85,hms_p=-3.921,hms_theta=13.8

1057

      daq rate 1.8kHz @ I=40uA

1058

1059

1060

3274  production, 02:23-3:04, target=Loop 2 LH2, shms_p=2.412,shms_theta=21.86,hms_p=-3.921,hms_theta=13.8

1061

      daq rate 850Hz @ I=20uA

1062

      daq rate 512Hz @ I=12uA

1063

1064

3275  production, 03:04-04:44, target=Loop 2 LH2, shms_p=2.412,shms_theta=21.86,hms_p=-3.921,hms_theta=13.8

1065

      daq rate 512Hz @ I=12uA

1066

1067

1068

3276  production, 04:44-8:49, target=Loop 2 LH2, shms_p=2.412,shms_theta=21.86,hms_p=-3.921,hms_theta=13.8

1069

      daq rate 512Hz @ I=12uA

1070

      HallC was doing FADC dead time study. current changed from 12uA, to 60uA then to 30uA

1071

1072

      06:27 HMS rotated to 18.595deg, SHMS roated to 37.97deg

1073

      07:00 I=75UA, target=LH2, shms_p=2.412,shms_theta=38,hms_p=-4.752,hms_theta=18.61,

1074

      07:28 target changed to dummy, I=40uA

1075

      07:48 HMS rotated to 21.095deg, SHMS rotated to 34.465deg

1076

      	    target=dummy, shms_p=2.792,shms_theta=34.49,hms_p=-4.391,hms_theta=21.11,

1077

      08:15 target changed to LH2, I=75uA

1078

      	    target=LH2, shms_p=2.792,shms_theta=34.49,hms_p=-4.391,hms_theta=21.11,

1079

1080

	    subrun   0-6: SHMS=21.86deg

1081

	    subrun     7: SHMS=21.86deg and 37.97deg

1082

 	    subrun  8-11: SHMS=37.97deg

1083

	    subrun    12: SHMS=37.97deg and 34.49deg

1084

	    subrun 13-16: SHMS=34.49deg

1085

1086

1087

08:59  HMS rotated to 26.55deg, SHMS rotated to 28.46deg

1088

1089

3277  production, 08:53-10:45, target=LH2, shms_p=3.493,shms_theta=28.47,hms_p=-3.727,hms_theta=26.56,

1090

      no beam for the first 100k triggers, beam returned at 09:30, I=75uA

1091

      10:10 target changed to dummy, I=40uA

1092

      10:27 beam stopped

1093

1094

===================20020818 Install VTP board=========================

1095

From here EPICS variables are inserted into ER

1096

1097

SHMS at 7.66deg and HMS at 28.78deg.

1098

1099

3278-3283 debug daq runs. HV are off. no beam.  good for pedestal

1100

HV are turned on in the middle of run 3283, but no beam after HV is on.

1101

1102

3284  production, 20:20-23:14, target=LH2,shms_p=4.605,shms_theta=7.66,hms_p=-1.727,hms_theta=28.78,

1103

      no beam for the first 100k triggers, beam came back at 21:11

1104

      daq rate 750Hz @ I=75UA

1105

      22:00 target changed to dummy

1106

      22:40 SHMS rotated to 9.66deg, target changed to LH2

1107

      target=LH2,shms_p=4.605,shms_theta=9.66,hms_p=-1.727,hms_theta=28.78,

1108

      daq rate 1235Hz @ I=75UA

1109

      subrun 0 contains data for SHMS=7.66deg

1110

      subrun 1 contains data for both 7.66deg and 9.66

1111

      subrun 2-3 contains data for SHMS=9.66deg

1112

1113

3285  production, 23:19-00:52 August 19th, target=LH2,shms_p=4.605,shms_theta=9.66,hms_p=-1.727,hms_theta=28.78,

1114

      daq rate 1235Hz @ I=75UA

1115

1116

3286  production, 00:54-05:28, target=LH2,shms_p=4.605,shms_theta=9.66,hms_p=-1.727,hms_theta=28.78,

1117

      coda lost roc3 at 01:15 and did not take data since then.

1118

      03:00  changed target to dummy

1119

      03:23 SHMS rotated to 11.66deg,

1120

      03:50 target changed to LH2,shms_p=4.605,shms_theta=11.67,hms_p=-1.727,hms_theta=28.78,

1121

1122

1123

3287  production, 05:29-12:57,target=LH2, shms_p=4.605,shms_theta=11.67,hms_p=-1.727,hms_theta=28.78,

1124

      8:25 SHMS rotated to 10deg and HMS to 42.23deg

1125

      target=LH2,shms_p=5.127,shms_theta=10,hms_p=-1.158,hms_theta=42.26,

1126

      no beam between 10:09 and 11:20

1127

      daq rate 1.5kHz @ I=77uA

1128

      subrun 0-19: 11.67deg

1129

      subrun 20: 11.67deg and 10deg

1130

      subrun 21-29: 10deg

1131

1132

1133

3288  production, 12:57-18:12, target=LH2, shms_p=5.127,shms_theta=10,hms_p=-1.158,hms_theta=42.26,

1134

      daq rate 1.5kHz @ I=77uA

1135

1136

3289  production, 18:14-18:31, target=LH2, shms_p=5.127,shms_theta=10,hms_p=-1.158,hms_theta=42.26,

1137

      daq rate 1.5kHz @ I=77uA

1138

1139

3290  production, 18:31-00:06 August 20th, target=LH2, shms_p=5.127,shms_theta=10,hms_p=-1.158,hms_theta=42.26,

1140

      daq rate 1.5kHz @ I=77uA

1141

      22:09 target changed to dummy, I=40uA

1142

      daq rate 512Hz @ I=40uA

1143

1144

3291  production, 00:08-00:34 August 20th, target=dummy, shms_p=5.127,shms_theta=10,hms_p=-1.158,hms_theta=42.26,

1145

      daq rate 512Hz @ I=40uA

1146

      0:26 target changed to LD2

1147

      Ion chamber calibration start from 00:31

1148

1149

3292  production, 00:34-00:49 August 20th, target=LD2, shms_p=5.127,shms_theta=10,hms_p=-1.158,hms_theta=42.26,

1150

      beam current ramped up from 0 to 32uA for Ion chamber calibration

1151

1152

3293  production, 00:50-08:50 August 20th, target=LD2, shms_p=5.127,shms_theta=10,hms_p=-1.158,hms_theta=42.26,

1153

      daq rate 3.2kHz @ I=77uA

1154

1155

3294  production, 08:51-14:18 August 20th, target=LD2, shms_p=5.127,shms_theta=10,hms_p=-1.158,hms_theta=42.26,

1156

      daq rate 3.2kHz @ I=77uA

1157

      10:36  SHMS rotated to 8deg,

1158

      target=LD2, shms_p=5.127,shms_theta=8,hms_p=-1.158,hms_theta=42.26, daq rate 2.0kHz @ I=78.5uA

1159

1160

      subrun 0-12: SHMS=10 deg

1161

      subrun 13: SHMS=10 deg and 8 deg

1162

      subrun 14-30: SHMS=8deg

1163

1164

3295  production, 14:18-01:19 August 21st, target=LD2, shms_p=5.127,shms_theta=8,hms_p=-1.158,hms_theta=42.26,

1165

      daq rate 2.0kHz @ I=78.5uA

1166

      00:18 taret changed to dummy, I=40uA

1167

1168

      subrun 0-48: LD2

1169

      subrun 49: LD2 and dummy

1170

      subrun 50: dummy

1171

1172

3296  production, 14:18-01:21 August 21st, target=dummy, shms_p=5.127,shms_theta=8,hms_p=-1.158,hms_theta=42.26,

1173

      just 106k events

1174

1175

3297  production, 01:24-02:54 August 21st, target=dummy, shms_p=5.127,shms_theta=8,hms_p=-1.158,hms_theta=42.26,

1176

      daq rate 500Hz @ I=40uA

1177

      02:36  changed to LH2 target, I=80uA

1178

1179

1180

3298  production, 02:55-14:46 August 21st, target=LH2, shms_p=5.127,shms_theta=8,hms_p=-1.158,hms_theta=42.26,

1181

      daq rate 1000Hz @ I=78uA

1182

1183

3299  production, 14:46-19:00 August 21st, target=LH2, shms_p=5.127,shms_theta=8,hms_p=-1.158,hms_theta=42.26,

1184

      daq rate 1000Hz @ I=78uA

1185

1186

19:01 SHMS rotated to 10deg

1187

1188

3300  production, 19:02-00:57 August 22th, target=LH2, shms_p=5.127,shms_theta=10,hms_p=-1.158,hms_theta=42.26,

1189

      daq rate 1500Hz @ I=78uA

1190

      23:47 target changed to LD2

1191

1192

3301  production, 00:57-02:51 August 22nd, target=LD2, shms_p=5.127,shms_theta=10,hms_p=-1.158,hms_theta=42.26,

1193

      daq rate 3.5 kHz @ I=80uA

1194

      beam stopped at 02:41

1195

1196

02:55 target changed to LH2

1197

03:00 SHMS rotated to 7.5deg, HMS rotated to 29.55deg

1198

1199

03:00 HMS Q1 interlock happened and SHMS Dipole did not response. Hall is in controlled access.

1200

05:00 Accelerator fire alarm, no beam.

1201

1202

3302  pedestal, 02:51-09:09 August 22nd, no beam

1203

1204

10:50 SHMS rotated to 5.5deg,

1205

1206

3303  production, 15:01-01:04 August 23rd, target=LH2, shms_p=5.422,shms_theta=5.49,hms_p=-0.96,hms_theta=29.57,

1207

      no beam until 16:20

1208

      daq rate 500Hz @ I=40uA

1209

1210

3304  production, 01:04-04:02 August 23rd, target=LH2, shms_p=5.422,shms_theta=5.49,hms_p=-0.96,hms_theta=29.57,

1211

      daq rate 500Hz @ I=40uA

1212

      03:00 changed to dummy target

1213

      beam stop at 03:15,  Trim rack W301B13 negative bulk supply fail

1214

1215

3305  production, 04:04-11:33 August 23rd, target=dummy, shms_p=5.422,shms_theta=5.49,hms_p=-0.96,hms_theta=29.57,

1216

      no beam at the beginning until 04:58

1217

      06:25 target changed to LD2

1218

      11:23 target changed to 'home' (absolute empty) for BCM calibration

1219

1220

1221

==================================================================================

1222

run 3171-3305 were using the same HV as FermiLab, but the HV for Shower_L is too low,

1223

the amplitude of the signal is about 10mv.

1224

1225

Here is the new HVs:

1226

Slot  2

1227

Name: Shower_L(SDU#4), Shower_R(THU#2), Shower_T(SDU#5), CherA, CherB, CherC, CherD

1228

HV:              1080             1100              930   1050   1050   1050   1050

1229

1230

Slot 10

1231

Name: SC0_T, SC0_B, SC1_T, SC1_B, LASPD_T, LASPD_B,  SPD, Preshower_L(SDU#1), Preshower_R(THU#1), Preshower_T(SDU#2)

1232

HV:    1600   1600   1700   1750      850     1000  1950                1550                1800               1750

1233

1234

1235

12:54 target changed to Loop 1 10cm LD2

1236

1237

3306  procudtion, 12:55-14:20 August 23rd, target=LD2, shms_p=5.422,shms_theta=5.49,hms_p=-0.96,hms_theta=29.57,

1238

      no beam for the first 100k triggers, beam came back at 13:18

1239

      daq rate = 2.7kHz @ I=31uA

1240

      daq rate = 3.0kHz @ I=33uA

1241

      This daq rate is too high comparing to run 3307. The beam might scratch the target frame.

1242

1243

==========HV changed=======

1244

Lower HVs for preshower_top and all 3 Ecal blocks

1245

1246

Slot 2

1247

Name: Shower_L(SDU#4), Shower_R(THU#2), Shower_T(SDU#5), CherA, CherB, CherC, CherD

1248

HV: 1030 1050 900 1050 1050 1050 1050

1249

1250

Slot 10

1251

Name: SC0_T, SC0_B, SC1_T, SC1_B, LASPD_T, LASPD_B, SPD, Preshower_L(SDU#1), Preshower_R(THU#1), Preshower_T(SDU#2)

1252

HV: 1600 1600 1700 1750 850 1000 1950 1550 1800 1700

1253

1254

1255

3307  procudtion, 14:23-18:23 August 23rd, target=LD2, shms_p=5.422,shms_theta=5.49,hms_p=-0.96,hms_theta=29.57,

1256

      daq rate = 1.7kHz @ I=31uA

1257

1258

1259

==========HV changed=======

1260

18:24 Adjusted TOP preshower (-40V) and top shower HVs (-30V)

1261

1262

Slot  2

1263

Name: Shower_L(SDU#4), Shower_R(THU#2), Shower_T(SDU#5), CherA, CherB, CherC, CherD

1264

HV:              1030             1050              870   1050   1050   1050   1050

1265

1266

Slot 10

1267

Name: SC0_T, SC0_B, SC1_T, SC1_B, LASPD_T, LASPD_B,  SPD, Preshower_L(SDU#1), Preshower_R(THU#1), Preshower_T(SDU#2)

1268

HV:    1600   1600   1700   1750      850     1000  1950                1550                1800               1660

1269

1270

1271

3308  procudtion, 18:25-18:34 August 23rd, target=LD2, shms_p=5.422,shms_theta=5.49,hms_p=-0.96,hms_theta=29.57,

1272

      daq rate = 1.0kHz @ I=31uA

1273

1274

==========HV changed=======

1275

SC1_top 1700 -> 1680

1276

Top preshower 1660-> 1640

1277

Top SHower 870 -> 850

1278

1279

06:45 SHMS rotated to 7.5 deg

1280

1281

3309  procudtion, 18:48-20:08 August 23rd, target=LD2, shms_p=5.422,shms_theta=7.5,hms_p=-0.96,hms_theta=29.57,

1282

      no beam for the first 100k triggers, beam came back at 19:36

1283

      beam stopped at 19:54 due to accelerator issue.

1284

1285

3310  production, 20:11-03:17 August 24th, target=LD2, shms_p=5.422,shms_theta=7.5,hms_p=-0.96,hms_theta=29.57,

1286

      daq rate 1.7kHz @I=80uA

1287

1288

3311  procudtion, 03:17-12:33 August 24th, target=LD2, shms_p=5.422,shms_theta=7.5,hms_p=-0.96,hms_theta=29.57,

1289

      no beam for the first 100k triggers, beam came back at 03:18

1290

      daq rate 1.7kHz @I=80uA

1291

      8:38  changed target to dummy, I=40uA

1292

      10:40 changed target to 'home'(absolute empty) for beam energy measurement, I=100nA, daq rate=1.2kHz

1293

1294

3312  trash, 12:38-12:44 August 24th, target=empty(?), shms_p=5.422,shms_theta=7.5,hms_p=-0.96,hms_theta=29.57,

1295

      daq rate=1.2kHz @ I=0.1uA,  the beam must have scratched something, 173k events

1296

      beam energy measurement result: beam = 6394.694 +/- 3.055 MeV

1297

1298

15:42 changed target to Loop2 LH2

1299

1300

3313  procudtion, 12:52-01:06 August 25th, target=LH2, shms_p=5.422,shms_theta=7.5,hms_p=-0.96,hms_theta=29.57,

1301

      no beam for the first 100k triggers, beam came back at 15:38

1302

      daq rate=750Hz @ I=78uA,

1303

1304

3314  procudtion, 01:07-08:56 August 25th, target=LH2, shms_p=5.422,shms_theta=7.5,hms_p=-0.96,hms_theta=29.57,

1305

      daq rate=750Hz @ I=78uA,

1306

      03:00 Rotated SHMS to 26.82 deg, HMS to 28.41 deg, shms_p=3.706,shms_theta=26.82,hms_p=-3.514,hms_theta=28.41,

1307

      04:16 changed target to dummy, I=40uA

1308

      04:35 Rotated SHMS to 23.13 deg, HMS to 33.37 deg, shms_p=4.22,shms_theta=23.13,hms_p=-3.014,hms_theta=33.37,

1309

      05:15 changed target to LH2

1310

1311

1312

3315  procudtion, 08:57-10:27 August 25th, target=LH2, shms_p=4.22,shms_theta=23.13,hms_p=-3.014,hms_theta=33.37,

1313

      daq rate=3.0kHz @ I=78uA,

1314

      beam stopped at 09:03, 777k evnets

1315

1316

09:30 Rotated SHMS  to 8.0 deg and HMS to 42.23deg

1317

1318

SBSVME22 lost connection. USB stick failed. No access until next accelerator maintenance day.

1319

can not control MPOD utill the 20220916.

1320

==============================================================================================

1321

1322

3318  pedestal, test daq, no beam, HV on

1323

3319  pedestal, test daq, no beam, HV on

1324

1325

20220917 23:23

1326

1327

3320  gem pedestal run, GEM HV was not on for this run

1328

1329

3321  trash run, pulser event enabled, unable to check GEM signal

1330

1331

==first 100k pulse event are disabled==

1332

1333

3322  beam seems stopped

1334

      23:51 still no beam

1335

      00:28 no beam

1336

      01:50 still no beam

1337

      02:22 beam delivery suspended due to transport ion chamber failure

1338

1339

3323  Latency check, initial latency value 49

1340

3324  initial latency value 49 -- (49 is too late)

1341

3325 & 3326  scan for value 52

1342

3327 & 3328  scan for value 55 -- (this seems good, also consistent with Ezekiel's INFN setup)

1343

3329 & 3330 & 3331 & 3332  scan for value 58 (seems too early)

1344

3333 & 3334 scan for value 64 -- (64 is too early)

1345

3335 & 3336 scan for value 60 -- (too early)

1346

1347

3337  production, 00:25 - 11:06 Sep. 19th, run with new GEM latency 55, (55 is too early)

1348

1349

3338  procudtion, 11:24 Sep 19th - 18:34 Sep. 20th, run with slightly modifed latency 52.

1350

      target=Fe, shms_p=-8.55,shms_theta=8.3,hms_p=1.82,hms_theta=48.3,

1351

      13:10 Sep 19th, changed target to B10

1352

      14:16 Sep 19th, changed target to B4C-11

1353

      16:00 Sep 19th, beam stopped till 00:24 Sep 20th

1354

      05:03 Sep 20th, changed target to Ca40, HMS roated to 66.4deg, HMS_p was set to 1.325

1355

      target=Ca40,shms_p=-8.55,shms_theta=8.3,hms_p=1.325,hms_theta=66.4,

1356

      09:00 Sep 20th, RF study started, no beam till 21:12

1357

1358

3339  production, 01:58 - 12:43 Sep 21st,

1359

      beam was bad, accelarator worked at about 50% efficiency

1360

      target=Ca40,shms_p=-8.55,shms_theta=8.3,hms_p=1.325,hms_theta=66.4,

1361

      10:44, SHMS Q1 vacuum issiu. Beam stopped.

1362

      11:54, Beam came back but last for 10 minutes only then went away.

1363

1364

3340  production,13:07 Sep 21st - 12:03 Sep 22nd,

1365

      target=Ca40,shms_p=-8.55,shms_theta=8.3,hms_p=1.325,hms_theta=66.4,

1366

1367

3341  production,12:04 Sep 22nd - 23:35 Sep 22nd,

1368

      target=Ca40,shms_p=-8.55,shms_theta=8.3,hms_p=1.325,hms_theta=66.4,

1369

1370

3342  production,23:36 Sep 22nd - 15:21 Sep 23rd,

1371

      target=Ca40,shms_p=-8.55,shms_theta=8.3,hms_p=1.325,hms_theta=66.4,

1372

      beam stopped due to vacuum issue at around 9:16.

1373

1374

3343  production,20:06 Sep 23rd -

1375

      target=Ca40,shms_p=-8.55,shms_theta=8.3,hms_p=1.325,hms_theta=66.4,

1376

      daq crashed at 02:22 Sep 25th

1377

1378

      Tunl11 lost mounting disk, vncserver can not start properly

1379

3344  daq crashed, no data file

1380

1381

3345  productin, 21:02 Sep 25th - 03:51 Sep 26th

1382

      target=carbon, shms_p=-8.55,shms_theta=8.3,hms_p=1.325,hms_theta=66.4,

1383

      daq rate 250Hz

1384

1385

target changed to B4C-10

1386

3346  production, 03:59 - 11:18 Sep 26th

1387

      target=B4C-10, shms_p=-8.55,shms_theta=8.3,hms_p=1.325,hms_theta=66.4,

1388

      beam stopped at ~05:45

1389

1390

3347  production, 11:20 Sep 26th - 20:34 Sep 27th, no beam until 20:12 Sep 26th.

1391

      target=B4C-10, shms_p=-8.55,shms_theta=8.3,hms_p=1.325,hms_theta=66.4,

1392

      20:30 target changed to Ca48

1393

      target=Ca48,shms_p=-8.55,shms_theta=8.3,hms_p=1.82,hms_theta=48.33,

1394

      03:51 Sep 27th, target changed to Ca40

1395

      04:19 Sep 27th, target changed to Carbon

1396

      04:35 Sep 27th, target changed to Beryllium

1397

      05:12 Sep 27th, target changed to B4C-10

1398

      05:40 Sep 27th, target changed to B4C-11

1399

      06:00 Sep 27th, target changed to Beryllium

1400

      13:42 Sep 27th, target changed to B4C-10

1401

      beam stopped at 17:20, Sep 27th

1402

1403

3348  production, 20:51, Sep 27th - 15:27 Sep 28th, no beam until 02:49 Sep 28th.

1404

      22:18 Sep 27th, target changed to B4C-11

1405

      target=B4C-11, shms_p=-8.55,shms_theta=8.3,hms_p=1.325,hms_theta=66.4,

1406

      09:59 Sep 28th, target changed to B4C-10

1407

      14:35 Sep 28th, target changed to Beryllium

1408

1409

3349  production, 15:28, Sep 28th - 10:40 Sep 29th, no beam until 20:12 Sep 26th.

1410

      target=Beryllium, shms_p=-8.55,shms_theta=8.3,hms_p=1.325,hms_theta=66.4, rate=500Hz

1411

      18:51 target changed to Loop 1 LD2

1412

      20:20 target changed to Fe

1413

      beam stopped at 7:00 Sep 29th.

1414

1415

==TS#3 enabled, which is ShowerSum==

1416

1417

3350  trash, daq test

1418

1419

1420

18:14 SHMS rotated to 26deg

1421

1422

3351  pedestal, 18:21 - 18:27 Sep 29th, no beam

1423

1424

3352  production, 18:28 Sep 29th - 22:32 Oct 1st, no beam until 22:34

1425

      23:04 Sep 29th, target changed to Carbon hole

1426

      target=Carbon Hole, shms_p=-4.935,shms_theta=26.02,hms_p=6.476,hms_theta=20.69,

1427

      23:30 Sep 29th, beam stopped

1428

      23:31 Sep 29th, target changed to Loop 2 LH2

1429

      10:04 Oct 1st, tune beam came back

1430

      target=LH2, shms_p=-4.935,shms_theta=26.02,hms_p=6.476,hms_theta=20.69,

1431

      15:38 Oct 1st, target changed to Caron

1432

      15:57 Oct 1st, Target changed to LH2

1433

      17:01 Oct 1st, SHMS at 9.24 deg and HMS at 29.39 deg

1434

      target=LH2, shms_p=-8,shms_theta=9.24,hms_p=4.17,hms_theta=29.41,

1435

      daq crashed at 18:34

1436

      20:28 Oct 1st, SHMS rotated to 10.77, HMS to 31.73

1437

      shms_p=-8,shms_theta=10.77,hms_p=3.76,hms_theta=31.73,

1438

1439

      subrun 00-01:  SHMS=26, Carbon hole + LH2

1440

      subrun 02-23:  SHMS=26deg, LH2

1441

      subrun 24:  SHMS=26deg, LH2 + carbon target

1442

      subrun 25:  SHMS=26deg, Carbon

1443

      subrun 26:  SHMS=26deg, carbon + SHMS=9.24deg LH2 target

1444

      subrun 27-42: shms_theta=9.24, LH2

1445

1446

1447

3353  production, 22:35 Oct 1st - 23:01 Oct 1st, daq crashed at about 22:55

1448

      target=LH2, shms_p=-8,shms_theta=10.77,hms_p=3.76,hms_theta=31.73,

1449

      22:38 Oct 1st, SHMS rotated to 16.55, HMS to 29.4

1450

      target=LH2, shms_p=-8,shms_theta=16.55,hms_p=4.17,hms_theta=29.4, daq rate=7kHz

1451

1452

3354  production, 23:02 Oct 1st - 23:40 OCt 1st,

1453

      target=LH2, shms_p=-8,shms_theta=16.55,hms_p=4.17,hms_theta=29.4, daq rate=7kHz

1454

      23:25 target changed to dummy

1455

      target=dummy, shms_p=-8,shms_theta=16.55,hms_p=4.17,hms_theta=29.4, daq rate=6.7kHz

1456

1457

==TS#3 prescale factor set to 10==

1458

1459

3355  production, 23:42 Oct 1st - 20:43 Oct 2nd

1460

      target=dummy, shms_p=-8,shms_theta=16.55,hms_p=4.17,hms_theta=29.4, daq rate=2.4kHz

1461

      23:55 Oct 1st, SHMS rotated to 15.09deg

1462

      00:15 Oct 2nd, target change to LH2

1463

      target=LH2,shms_p=-8,shms_theta=15.09,hms_p=3.77,hms_theta=31.72,

1464

      00:51 Oct 2nd, SHMS rotated to 13.67deg

1465

      01:07 Oct 2nd, target change to dummy

1466

      target=dummy,shms_p=-8,shms_theta=13.67,hms_p=3.35,hms_theta=34.36,

1467

      01:37 Oct 2nd, SHMS rotated to 12.24deg

1468

      target=dummy,shms_p=-8,shms_theta=12.24,hms_p=2.94,hms_theta=37.37,

1469

      02:08 Oct 2nd,target changed to LH2

1470

      02:25 Oct 2nd, SHMS rotated to 10.78deg

1471

      target=LH2,shms_p=-8,shms_theta=10.78,hms_p=2.51,hms_theta=40.97,

1472

      02:57 Oct 2nd,target changed to dummy

1473

      03:25 Oct 2nd, SHMS rotated to 9.25deg

1474

      target=dummy,shms_p=-8,shms_theta=9.25,hms_p=2.08,hms_theta=45.36,

1475

      03:42 Oct 2nd,target changed to LH2

1476

      04:30 Oct 2nd, SHMS rotated to 26.02deg

1477

      target=LH2,shms_p=-4.935,shms_theta=26.02,hms_p=6.476,hms_theta=19.55,

1478

      12:29 Oct 2nd,target changed to dummy

1479

      13:30 Oct 2nd, SHMS rotated to 20.02deg

1480

      target=dummy,shms_p=-6.286,shms_theta=20.02,hms_p=5.107,hms_theta=24.91,

1481

      14:02 Oct 2nd,target changed to LH2

1482

      15:30 Oct 2nd, SHMS rotated to 15.01deg

1483

      target=LH2,shms_p=-7.626,shms_theta=15.01,hms_p=3.738,hms_theta=31.89,

1484

      16:05 Oct 2nd,target changed to dummy

1485

      16:30 Oct 2nd, SHMS rotated to 10.02deg

1486

      target=dummy,shms_p=-9.005,shms_theta=10.02,hms_p=2.289,hms_theta=43.13,

1487

      17:55 Oct 2nd,target changed to LH2

1488

      18:40 Oct 2nd, SHMS rotated to 10.02deg

1489

      target=LH2,shms_p=-9.2,shms_theta=9.26,hms_p=2.076,hms_theta=45.39,

1490

      19:05 Oct 2nd,target changed to dummy

1491

      19:35 Oct 2nd, SHMS rotated to 7.995deg

1492

      target=dummy,shms_p=-9.502,shms_theta=7.995,hms_p=1.739,hms_theta=49.53,

1493

      21:30 Oct 2nd,target changed to LH2

1494

      21:54 Oct 2nd,SJMS sieve in

1495

      22:18 Oct 2nd,target changed to Beryllium,

1496

      target=Be,SHMS Sieve Slit in,shms_p=-9.502,shms_theta=7.995,hms_p=1.739,hms_theta=49.53,

1497

1498

1499

3356  production, 20:44 Oct 2nd - 17:05 Oct 3rd

1500

      target=dummy, shms_p=-9.502,shms_theta=7.995,hms_p=1.739,hms_theta=49.53,

1501

      22:52 Oct 2nd,target changed to LH2

1502

      target=LH2,SHMS Sieve Slit in,shms_p=-9.502,shms_theta=7.995,hms_p=1.739,hms_theta=49.53,

1503

      23:28 Oct 2nd,target changed to dummy, SHMS sieve still in

1504

      target=dummy,SHMS Sieve Slit in,shms_p=-9.502,shms_theta=7.995,hms_p=1.739,hms_theta=49.53,

1505

      23:45 Oct 2nd, SHMS momentum set to -8.55

1506

      00:08 Oct 3rd,target changed to LH2

1507

      target=LH2,SHMS Sieve Slit in,shms_p=-8.55,shms_theta=7.995,hms_p=1.739,hms_theta=49.53,

1508

1509

      00:49 Oct 3rd,target changed to Beryllium,

1510

      target=Beryllium,SHMS Sieve Slit in,shms_p=-8.55,shms_theta=7.995,hms_p=1.739,hms_theta=49.53,

1511

      01:28 Oct 3rd,target changed to LH2

1512

      01:42 roated SHMS and HMS. Spectrometer Emergency Stop Detected, Hall is open for trouble shooting.

1513

      beam stopped from 1:38.

1514

      Accelerator can not deliver beam since 04:10 Oct 3rd

1515

1516

1517

1518

==SHMS roated to 20.02deg, HMS to 20deg==

1519

1520

3357  production, 18:20 Oct 3rd - 12:14 Oct 4th

1521

      23:45 Oct 3rd, tune beam

1522

      target=LH2,shms_p=-4,shms_theta=20.02,hms_p=-4,hms_theta=20.0,

1523

      01:05 SHMS and HMS rotated to 25deg

1524

      target=LH2,shms_p=-3.5,shms_theta=25.02,hms_p=-3.5,hms_theta=25.0,

1525

      03:22 SHMS and HMS rotated to 25deg

1526

      target=LH2,shms_p=-2.5,shms_theta=35.02,hms_p=-2.5,hms_theta=35.0,

1527

      05:27 change momentum to 1.24GeV SHMS

1528

      target=LH2,shms_p=-1.24,shms_theta=35.02,hms_p=-2.5,hms_theta=35.0,

1529

      08:19 SHMS rotated to 8 deg, momentum is set to -9.2GeV

1530

      08:45 target changed to LD2

1531

      target=LD2,shms_p=-9.2,shms_theta=8,hms_p=-2.5,hms_theta=35.0,

1532

      08:45 target changed to C12

1533

      target=Carbon,shms_p=-9.2,shms_theta=8,hms_p=-2.5,hms_theta=35.0,

1534

1535

      10:40 Beam is off

1536

1537

3358  cosmic, 13:30 Oct 4th - 13:40 Oct 5th, no beam for the whole run

1538

1539

3359  cosmic, 13:42 Oct 5th - 13:49 Oct 6th, no beam for the whole run

1540

1541

3360  cosmic, 13:51 Oct 6th - 15:24 Oct 6th, no beam for the whole run

1542

1543

==change TS#3 prescale factor to 1==

1544

1545

3361  cosmic, 15:26 Oct 6th - 17:45 Oct 6th, no beam for the whole run

1546

1547

== enable TS#4, which is VME DSC ELC output ch4 ==

1548

1549

3362  production, 17:47 Oct 6th - 01:02 Oct 10th, no beam until 04:09 Oct 9th

1550

1551

      beam stopped at 19:05 Oct 9th

1552

1553

3363  production, 01:02 Oct 10th - 18:23 Oct 10th

1554

1555

1556

3364  production, 18:24 Oct 10th - 14:52 Oct 11th

1557

      daq rate 6.4kHz

1558

      daq crashed at 06:07 Oct 11th

1559

1560

3365  production, 14:54 Oct 11th - 20:56 Oct 11th

1561

1562

1563

3366  production, 20:58 Oct 11th - ? Oct 12th

1564

1565

      daq rate 6.7kHz

Project

General

Profile

SoLID DAQ » SoLID ECal

Hallc beamtest runlist » History » Version 5