Hallc beamtest runlist 18deg » History » Version 4
Jixie Zhang, 03/15/2023 10:41 AM
| 1 | 2 | Jixie Zhang | |
|---|---|---|---|
| 2 | |||
| 3 | ==================== Start of 18 deg =================================== |
||
| 4 | 20232020 |
||
| 5 | |||
| 6 | 4286 - 4293 GEM cosmic |
||
| 7 | |||
| 8 | 20230221 Work done in the Hall or the counting house: |
||
| 9 | |||
| 10 | 1) Moved bunker to new location, push detector stand & table to 18deg. Align the table to the target with laser pen. |
||
| 11 | 2) GEM detectors: |
||
| 12 | A) Use NEW LV cable which can connect to the LV board in the MPOD crate |
||
| 13 | B) Install 1x1 foot poly shileding |
||
| 14 | C) Align the trigger latency for all 4 triggers within 20ns |
||
| 15 | 3) SC, PreShower and Shower detectors: |
||
| 16 | A) Change triggers TS2 as "SC_D & SC_B", TS3 as "SC_A & SC_D", remove TS5 |
||
| 17 | B) Connect SC_A,SC_B,SC_C and SC_D to x10 multiplier |
||
| 18 | C) Align trigger latency between TS1,TS2,TS3 and TS4 within 4ns using function generator |
||
| 19 | D) Increase LASPD HVs by 10% from (T,B)=(800,900) to (880,990) |
||
| 20 | E) Preshower averaged pulse height is ~40ADC, increase their HVs(L,R,T) from (1470,1740,1680) to (1515,1800,1730), |
||
| 21 | which is determined from the cosmic and gain matched on Jan 11th. |
||
| 22 | 4) Do pedestal run for FADC without HVs. FADC configuration file is updated to match the above changes and the new pedestal. |
||
| 23 | |||
| 24 | --------------------------------------------------- |
||
| 25 | List of HVs: |
||
| 26 | board1, 6kV, 8-ch: |
||
| 27 | Name:_GEM00,__,__,_GEM01,_GEM10,_GEM11,__,_Cer_D |
||
| 28 | HV:____3400,_0,_0,__3750,__3750,__3750,_0,___950 |
||
| 29 | |||
| 30 | |||
| 31 | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
||
| 32 | HV:___1100,_1500,_1600,_0,_____880,_____990,_1600,___________1515,___________1800,___________1730,_____________850,____________1030,_____________970,___950,___950,___950 |
||
| 33 | --------------------------------------------------- |
||
| 34 | |||
| 35 | |||
| 36 | 4297-4298 pedestal, beam off, HV off, pulse trigger |
||
| 37 | 4299-4300 trash, SSP lost connection |
||
| 38 | 4301-4302 pedestal, beam off, HV on, using hallc_fadc config (without GEM), pulse trigger |
||
| 39 | 4303-4304 trash |
||
| 40 | 4305 pedestal, beam on, HV off, pulse trigger |
||
| 41 | 4306 pedestal, beam on, only SC_C HV is on (ch B.06), pulse trigger |
||
| 42 | 4307 trash, ssp error, TS4, PS4=10, Beam on, all HVs on,threshold 200mV |
||
| 43 | |||
| 44 | |||
| 45 | 5uA beam on target hole |
||
| 46 | |||
| 47 | pulse trigger for 300k events, for pedestal with beam on and HV on |
||
| 48 | 4308 pedestal, Beam on, all HVs on, pulse trigger, rate=3.7kHz |
||
| 49 | 4309 pedestal, Beam on, all HVs on, pulse trigger, rate=3.7kHz |
||
| 50 | 4310 pedestal, Beam on, all HVs on, pulse trigger, rate=3.7kHz |
||
| 51 | |||
| 52 | no pulse trigger |
||
| 53 | 4311-4314 trash |
||
| 54 | |||
| 55 | |||
| 56 | 20230221 |
||
| 57 | ===Run plan=== |
||
| 58 | start with TS4, PS=10, determine the prescale factor by scan the threshold, |
||
| 59 | then take data for each trigger bit to determine peak time |
||
| 60 | TS4, Threshold=40mV, set proper PS4 such that rate=3kHz to take one run |
||
| 61 | TS3, Threshold 50mV & 50mV, determine PS3 then take one run |
||
| 62 | TS2, Threshold 50mV & 50mV, determine PS2 then take one run |
||
| 63 | TS1, Threshold 50mV & 50mV, determine PS1 then take one run |
||
| 64 | Set proper PS1,PS2,PS3 and PS4, take 2 runs with all triggers |
||
| 65 | ============== |
||
| 66 | |||
| 67 | ==5uA beam on C12 target hole, all HVs on |
||
| 68 | 4315 TS4, PS4=10, scan threshold from 300mV to 20mV to check rate to determine threshold |
||
| 69 | 4316 TS4, PS4=0, threshold 20mV(ShowerSum), rate=2.4kHz |
||
| 70 | --------------------------------------------------- |
||
| 71 | Increase HVs for SC_D,SC_A,SC_B by 50V to match what has been used in 7deg: (1150,1550,1650) |
||
| 72 | --------------------------------------------------- |
||
| 73 | |||
| 74 | ==5uA beam on C12 target hole, all HVs on |
||
| 75 | 4317 TS4, PS4=0, threshold: 20mV(ShowerSum), rate=2.4kHz, |
||
| 76 | 4318 TS3, PS3=0, threshold: 36mV(SC_A) & 36mV(SC_D), rate=3.7kHz, daq saturated |
||
| 77 | 4319 TS3, PS3=0, threshold: 50mV(SC_A) & 50mV(SC_D), rate=3.7kHz, daq saturated |
||
| 78 | |||
| 79 | ==10uA beam on LH2 target |
||
| 80 | We found that SC_B is saturated easily at 1650V HV, so we decreased it to 1550V, this will affect TS2 |
||
| 81 | TS4 threshold: 20mV(ShowerSum), (rate=40kHz without PS) |
||
| 82 | |||
| 83 | 4320 TS3, PS3=5, threshold: 50mV(SC_A) & 50mV(SC_D), rate=3.7kHz, daq saturated (600kHz without PS) |
||
| 84 | 4321 TS3, PS3=7, threshold: 50mV(SC_A) & 50mV(SC_D), rate=3.7kHz, daq saturated |
||
| 85 | 4322 TS3, PS3=10, threshold: 50mV(SC_A) & 50mV(SC_D), rate=0.6kHz, |
||
| 86 | 4323 TS3, PS3=8, threshold: 50mV(SC_A) & 50mV(SC_D), rate=2.4kHz, |
||
| 87 | 4324 TS2, PS2=4, threshold: 50mV(SC_B) & 50mV(SC_D), rate=1.1kHz, |
||
| 88 | 4325 TS2, PS2=3, threshold: 50mV(SC_B) & 50mV(SC_D), rate=2.0kHz, (26kHz without PS) |
||
| 89 | 4326 TS2, PS2=3, threshold: 36mV(SC_B) & 36mV(SC_D), rate=3.7kHz, daq saturated (40kHz without PS) |
||
| 90 | 4327 TS1, PS1=2, threshold: 35mV(CerSum, 2pe) & 20mV(ShowerSum), rate=3.7kHz, daq saturated (14kHz without PS @ 15uA beam current), |
||
| 91 | 4328 TS1, PS1=3, threshold: 35mV(CerSum, 2pe) & 20mV(ShowerSum), rate=0.4kHz @ 5uA beam current |
||
| 92 | no beam ...... to be continued |
||
| 93 | |||
| 94 | ======================================================================== |
||
| 95 | Threshold Guidence: |
||
| 96 | 1) ShowerSum: MIP is at ~470 ADC, which is 40MeV. Shower sampling is 20%. Therefore 1 GeV electron will have ~2350 ADC in integral. |
||
| 97 | The averaged Integral/Height for ShowerSum is 8.2, Note that 1ADC=0.488mV, therefore the threshold corresponding to 2350 ADC |
||
| 98 | integral is 0.488*2350/8.2 = 140 mV. |
||
| 99 | |||
| 100 | Sugggested threshold for ShowerSum: |
||
| 101 | To cut off 1 GeV electron: 140mV |
||
| 102 | To cut off 500MeV electron: 70mV |
||
| 103 | To keep low energy photon background: 10mV |
||
| 104 | |||
| 105 | 140mV can only cut off 50% 1 GeV electrons. |
||
| 106 | To Cut of 99.7% of 1 GeV electrons (3-sigma), we need to apply threshold: 0.488*2350/(8.23-3*0.7345) = 190mV |
||
| 107 | To include 99.7% of 1GeV electrons: 0.488*2350/(8.23+3*0.7345) = 110mV |
||
| 108 | To include 95% of 1GeV electrons: 0.488*2350/(8.23+2*0.7345) = 118mV ---> rounded to 120mV |
||
| 109 | |||
| 110 | 2) TS2: Half MIP: SC_B=45mV, SC_D=35mV (By Jx: SC_B(1650V)=57mV, SC_D(1150V)=34mV) |
||
| 111 | 3) TS3: Half MIP: SC_A=35mV, SC_D=35mV (By Jx: SC_A(1550V)=31mV, SC_D(1150V)=34mV) |
||
| 112 | |||
| 113 | ======================================================================== |
||
| 114 | 20230223 |
||
| 115 | ==40uA at gold target== |
||
| 116 | threshold |
||
| 117 | TS1: CerSum(35mV or 72adc, 2pe) & ShowerSum(70mV or 143adc, 500MeV electron); |
||
| 118 | TS2: SC_D(50mV or 410adc) & SC_B(50mV or 410adc); |
||
| 119 | or SC_D(36mV or 295adc) & SC_B(36mV or 295adc); |
||
| 120 | or SC_D(20mV or 164adc) & SC_B(20mV or 164adc); |
||
| 121 | TS3: SC_D(50mV or 410adc) & SC_A(50mV or 410adc); |
||
| 122 | TS4: ShowerSum(140mV or 287adc, 1GeV electron); |
||
| 123 | or (70mV or 143adc, 500MeV electron); |
||
| 124 | or (20mV or 41adc, 70% MIP); |
||
| 125 | TS5: N/A. |
||
| 126 | TS6: CerA#,CerB#,CerC#,CerD#(15mV or 31 adc unit) for each Cherenkov individual input. |
||
| 127 | |||
| 128 | |||
| 129 | ==hallc_fadc config, no GEMs== |
||
| 130 | 4329 TS4, PS4=0, threshold: 20mV(ShowerSum), rate=3.7kHz @40uA, Shower detectors partly saturated, 170k events |
||
| 131 | 4330 TS4, PS4=5, threshold: 70mV(ShowerSum), rate=2.9kHz @40uA, 860k events |
||
| 132 | 4331 TS4, PS4=0, threshold: 140mV(ShowerSum), rate=3.1kHz @40uA, 1.6M events |
||
| 133 | 4332 TS1, PS1=0, threshold: CerSum(35mV, or 2pe) & ShowerSum(70mV or 500MeV electron), rate=5.0kHz @40uA, 1.1M events |
||
| 134 | Cherenkov or Shower detectors are partly saturated. TS1 have maximum rate (9kHz) at 25uA. |
||
| 135 | 4333 TS1, PS1=0, threshold: CerSum(35mV, or 2pe) & ShowerSum(70mV or 500MeV electron), rate=5.0kHz, 1.6M events |
||
| 136 | Cherenkov or Shower detectors are partly saturated. TS1 have maximum rate (9kHz) at 25uA. |
||
| 137 | 4334 trash, |
||
| 138 | 4335 Low stat, TS4, PS4=10, threshold: 10mV(ShowerSum), rate=0Hz, Shower detector 100% saturated, |
||
| 139 | changed to 20mV threshold at the end to check detector saturation. 14k events |
||
| 140 | 4336 TS4, PS4=10, threshold: 20mV(ShowerSum), rate=1.4kHz @40uA, Shower detector partly saturated . |
||
| 141 | TS4 have maximum rate (12.5kHz) at 25uA. 805k events |
||
| 142 | 4337 TS2, PS2=10, threshold: 50mV(SC_D) & 50mV(SC_B), rate=5.0kHz @40uA, detectors not saturated. 1.1M events |
||
| 143 | 4338 TS2, PS2=10, threshold: 36mV(SC_D) & 36mV(SC_B), rate=5.5kHz @40uA, detectors not saturated. 1.8M events |
||
| 144 | 4339 TS2, PS2=10, threshold: 20mV(SC_D) & 20mV(SC_B), rate=3.1kHz @40uA, detectors partly saturated. 947k events |
||
| 145 | 4340 Low stat,TS3, PS3=12, threshold: 50mV(SC_D) & 50mV(SC_A), rate=0Hz @40uA, detectors 100% saturated. |
||
| 146 | adjust threshold to 50mV(SC_D) & 150mV(SC_A), rate=0Hz @40uA, detectors still 100% saturated. |
||
| 147 | ====================================================================================================== |
||
| 148 | 20230225 |
||
| 149 | |||
| 150 | ==Plan== |
||
| 151 | Adjust SC_B, preshower, LASPD HVs then take data for each trigger bit using the given thresholds |
||
| 152 | ======== |
||
| 153 | |||
| 154 | Increase LASPD HVs by 50V, SC_B go back to 1600V (was 1650), |
||
| 155 | PreShower(L,R,T) from (1515,1800,1730) to (1600,1800,1700) |
||
| 156 | Shower (L,R,T) from (850,1030,970) to (860,1030,960) |
||
| 157 | |||
| 158 | --------------------------------------------------- |
||
| 159 | List of HVs: |
||
| 160 | board1, 6kV, 8-ch: |
||
| 161 | Name:_GEM00,__,__,_GEM01,_GEM10,_GEM11,__,_Cer_D |
||
| 162 | HV:_______0,_0,_0,_____0,_____0,_____0,_0,___950 |
||
| 163 | |||
| 164 | |||
| 165 | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
||
| 166 | HV:___1150,_1550,_1600,_0,_____930,____1040,_1600,___________1600,___________1800,___________1700,_____________860,____________1030,_____________960,___950,___950,___950 |
||
| 167 | |||
| 168 | --------------------------------------------------- |
||
| 169 | 10uA beam on LH2 target |
||
| 170 | ==threshold== |
||
| 171 | TS1: CerSum(35mV or 72adc, 2pe) & ShowerSum(70mV or 143adc, 500MeV electron); |
||
| 172 | TS2: SC_D(35mV or 295adc) & SC_B(35mV or 295adc); |
||
| 173 | TS3: SC_D(35mV or 295adc) & SC_A(31mV or 410adc); |
||
| 174 | TS4: ShowerSum(15mV or 31adc, 50% MIP); |
||
| 175 | |||
| 176 | 4341 trash, TS4, PS4=0, threshold: 120mV(ShowerSum), no beam 11 events |
||
| 177 | 4342 trash, ssp time out |
||
| 178 | 4343 TS4, PS4=0, threshold: 120mV(ShowerSum, keep 95% 1GeV electrons), first 300k is pulse trigger, rate=460Hz @6uA |
||
| 179 | 4344 TS4, PS4=0, threshold: 120mV(ShowerSum, keep 95% 1GeV electrons), rate=840Hz @10uA, 150k events |
||
| 180 | 4345 TS4, PS4=0, threshold: 70mV(ShowerSum 2.5MIP), rate=3.3kHz @10uA, 639k events, coda crashed at the end |
||
| 181 | 4346 TS2, PS2=5, threshold: 35mV(SC_D) & 35mV(SC_B), rate=3.7kHz @10uA, daq saturated, 750k events |
||
| 182 | 4347 TS2, PS2=7, threshold: 35mV(SC_D) & 35mV(SC_B), rate=1.6kHz @10uA, 469k events |
||
| 183 | 4348 TS2, PS2=6, threshold: 35mV(SC_D) & 35mV(SC_B), rate=3.3kHz @10uA, 753k events |
||
| 184 | 4349 TS3, PS3=8, threshold: 35mV(SC_D) & 31mV(SC_A), rate=3.6kHz @10uA, daq NOT saturated, 956k events |
||
| 185 | 4350 TS3, PS3=9, threshold: 35mV(SC_D) & 31mV(SC_A), rate=1.8kHz @10uA, 986k events |
||
| 186 | 4351 TS1, PS1=0, threshold: 35mV(CerSum, 2pe) & 30mV(ShowerSum), rate=2.9kHz @10uA, 2.8M events, coda crashed at the end |
||
| 187 | 4352 TS4, PS4=4, threshold: 15mV(ShowerSum, Half MIP), rate=3.7kHz @10uA, daq saturated, 610k events |
||
| 188 | 4353 trash, ssp error |
||
| 189 | 4354 trash, TS4, PS4=5, threshold: 15mV(ShowerSum, Half MIP), no beam |
||
| 190 | 4355 pedestal, beam off HV on |
||
| 191 | 4356 pedestal, beam off HV off |
||
| 192 | 4357 trash, |
||
| 193 | 4358 TS4, PS4=5, threshold: 15mV(ShowerSum, Half MIP), PreShower(L,R,T) from (1600,1800,1700) to (1600,1810,1700), |
||
| 194 | rate=2.4kHz @10uA,2M events |
||
| 195 | 4359 TS1,TS2,TS3,TS4, PS1=2,PS2=8,PS3=10,PS4=6, LH2 target |
||
| 196 | threshold: TS1=CerSum(35mV) & ShowerSum(30mV, MIP); TS2= SC_D(35mV) & SC_B(35mV); SC_D(35mV) & SC_A(31mV); |
||
| 197 | TS4=15mV(ShowerSum, Half MIP), PreShower(L,R,T) = (1600,1810,1700), |
||
| 198 | rate=3.6kHz @10uA, 1.4M events |
||
| 199 | 4360 TS1,TS2,TS3,TS4, PS1=2,PS2=8,PS3=10,PS4=6, LH2 target |
||
| 200 | threshold: TS1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); TS2= SC_D(35mV) & SC_B(35mV); SC_D(35mV) & SC_A(31mV); |
||
| 201 | TS4=15mV(ShowerSum, Half MIP), PreShower(L,R,T) = (1600,1810,1700), |
||
| 202 | rate=3.0kHz @10uA, 34.6M events, beam current sometime go up to 20uA and 30uA |
||
| 203 | subrun 0-5: 10uA |
||
| 204 | subrun 6: mixed with 10uA and 20uA |
||
| 205 | subrun 7-13: 20uA |
||
| 206 | subrun 14-30: 30uA |
||
| 207 | subrun 31: mixed with 30uA and 10uA |
||
| 208 | subrun 32-35: 10uA, |
||
| 209 | subrun 36: mixed with 10uA and 20uA |
||
| 210 | subrun 37-48: 20uA |
||
| 211 | subrun 49: mixed with 20uA and 10uA |
||
| 212 | subrun 50-54: 10uA |
||
| 213 | |||
| 214 | 4361 trash, ssp error |
||
| 215 | 4362 TS1,TS2,TS3,TS4, PS1=2,PS2=8,PS3=10,PS4=6, LH2 and dummy target at the end |
||
| 216 | threshold: TS1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); TS2= SC_D(35mV) & SC_B(35mV); SC_D(35mV) & SC_A(31mV); |
||
| 217 | TS4=15mV(ShowerSum, Half MIP), PreShower(L,R,T) = (1600,1810,1700), |
||
| 218 | rate=3.1kHz @10uA on LH2 target, 1.8M events. From 12:11 changed to dummy target, rate droped to 1.8kHz |
||
| 219 | 4363 trash, ssp error |
||
| 220 | 4364 TS1,TS2,TS3,TS4, PS1=1,PS2=7,PS3=9,PS4=5, dummy target |
||
| 221 | threshold: TS1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); TS2= SC_D(35mV) & SC_B(35mV); SC_D(35mV) & SC_A(31mV); |
||
| 222 | TS4=15mV(ShowerSum, Half MIP), PreShower(L,R,T) = (1600,1810,1700), |
||
| 223 | rate=3.5kHz @10uA on dummy target, 2.2M events |
||
| 224 | |||
| 225 | 4365 TS4, PS4=7, threshold: 15mV(ShowerSum, Half MIP), rate=3.6kHz @ 15uA beam on LD2 target, |
||
| 226 | PreShower(L,R,T) changed from (1600,1810,1700) to (1600,1820,1700), 306k events |
||
| 227 | |||
| 228 | 4366 TS4, PS4=4, threshold: 120mV(ShowerSum, Keep 95% of 1GeV electron), rate=3.2kHz @ 40uA beam on LD2 target |
||
| 229 | PreShower(L,R,T) = (1600,1820,1700), coda crashed after collecting 1.2M events |
||
| 230 | 4367 TS4, PS4=4, threshold: 120mV(ShowerSum, Keep 95% of 1GeV electron), rate=3.2kHz @ 40uA beam on LD2 target |
||
| 231 | PreShower(L,R,T) = (1600,1820,1700), 2.3M events |
||
| 232 | 4368 TS4, PS4=4, threshold: 120mV(ShowerSum, Keep 95% of 1GeV electron), rate=3.2kHz @ 40uA beam on LD2 target |
||
| 233 | PreShower(L,R,T) = (1600,1820,1700), 5.5M events |
||
| 234 | |||
| 235 | 4369-4370 pedestal, beam off HV off |
||
| 236 | 4371-4372 trash, ssp err |
||
| 237 | 4373-4374 pedestal, beam off HV on |
||
| 238 | |||
| 239 | 4375 trash or not useful, empty target, 1k events. |
||
| 240 | ======================================================================== |
||
| 241 | 20230301 |
||
| 242 | --------------------------------------- |
||
| 243 | Work done on 20230301 |
||
| 244 | |||
| 245 | 1. Signal cable for SC_C(253) and CerB3 (285) were swapped in the patch panel. They look similar to each other |
||
| 246 | since the labels are faded out. After swapping them back both look good. CerB3 is now connected to FADC Slot7 ch07, |
||
| 247 | but it is not included in CerSum. |
||
| 248 | 2. Change all Cherenkov FADC range from 2.0V to 1.0V, including the CerSum at FADC slot8 ch03. By doing this, 1ADC=0.244mV, |
||
| 249 | Cherenkov signal height will be doubled therefore in the new data it will not be affected as much as before by the peak |
||
| 250 | finding threshold cut (default 20 adc). |
||
| 251 | 3. Change PreShSum (Slot8 ch13) range from 2.0V to 0.5V so it matches to PreShower individual detectors. By doing this, |
||
| 252 | software sum should match to the hardware sum. |
||
| 253 | 4. Change latency of each trigger bit. Align TS1, TS2 and TS3 to TS4 within 4ns. All inputs after the vmeDSC are aligned within 4ns. |
||
| 254 | ----------------------------------------- |
||
| 255 | |||
| 256 | --------------------------------------------------- |
||
| 257 | List of HVs: |
||
| 258 | board1, 6kV, 8-ch: |
||
| 259 | Name:_GEM00,__,__,_GEM01,_GEM10,_GEM11,__,_Cer_D |
||
| 260 | HV:_______0,_0,_0,_____0,_____0,_____0,_0,___950 |
||
| 261 | |||
| 262 | |||
| 263 | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
||
| 264 | HV:___1150,_1550,_1600,_0,_____930,____1040,_1600,___________1600,___________1820,___________1700,_____________860,____________1030,_____________960,___950,___950,___950 |
||
| 265 | |||
| 266 | GEM1 HV can not turn on! |
||
| 267 | Using hallc_fadc config, no gem because GEM1 HV can not turn on |
||
| 268 | 4376-4378 pedestal, beam off HV off, SC_C, SC_D, CerC1 have lose connection |
||
| 269 | 4379-4380 pedestal, beam off HV on, SC_C, SC_D, CerC1 have lose connection |
||
| 270 | |||
| 271 | 18:45 escorted access to fix SC_C, SC_D, CerC1 cable connection problem. |
||
| 272 | |||
| 273 | 4381 pedestal, beam off HV on |
||
| 274 | 4382 pedestal, beam off HV off |
||
| 275 | 4383 pedestal, beam off HV on |
||
| 276 | |||
| 277 | 50uA on LD2 target. |
||
| 278 | Expected rate and threshold |
||
| 279 | TS1: CerSum(35mV, 2pe) & ShowerSum(70mV keep 50% 500MeV electrons): rate = 300kHz |
||
| 280 | TS2: SC_D(35mV) & SC_B(35mV); rate3 = 5.2MHz |
||
| 281 | TS3: SC_D(35mV) & SC_A(31mV); totally saturated |
||
| 282 | TS4: ShowerSum(120mV, keep 95% 1GeV electrons): rate = 100kHz |
||
| 283 | or (70mV, keep50% 500MeV electron): rate = 400kHz |
||
| 284 | or (15mV, half MIP): rate = 12MHz |
||
| 285 | |||
| 286 | 4384 TS4, PS4=4, Threshold: 120mV (ShowerSum,keep 95% of 1 GeV electron), NO GEM, 1.9M events, |
||
| 287 | rate=6.5kHz @ 50uA |
||
| 288 | == set FADC250_TET_IGNORE_MASK to ZERO for both FADC boards, threshold 20ADC== |
||
| 289 | 4385 TS4, PS4=2, Threshold: 120mV (ShowerSum), NO GEM, rate=12.5kHz @ 50uA, daq saturated, 9.8M events |
||
| 290 | 4386 TS4, PS4=10, Threshold: 15mV (ShowerSum, half MIP), NO GEM, rate=11.9kHz @ 50uA, |
||
| 291 | Showers are partly saturated, 4.0M events |
||
| 292 | 4387 TS4, PS4=9, Threshold: 15mV (ShowerSum, half MIP), rate=12.5kHz @ 50uA, |
||
| 293 | Showers are partly saturated, daq also saturated, 5.0M events |
||
| 294 | 4388 TS1, PS1=5, Threshold: CerSum(35mV, 2pe) & ShowerSum(70mV keep 50% 500MeV electrons), |
||
| 295 | rate=10.0kHz @ 50uA, Cherenkov is partly saturated, daq also saturated, 2.3M events |
||
| 296 | 4389 TS2, PS2=8, Threshold: SC_D(35mV) & SC_B(35mV), |
||
| 297 | rate=12.5kHz @ 50uA, SC_D is partly saturated, daq also saturated, 5.5M events |
||
| 298 | 4390 TS2, PS2=9, Threshold: SC_D(35mV) & SC_B(35mV), |
||
| 299 | rate=10.3kHz @ 50uA, SC_D is partly saturated, daq also saturated, 484k events |
||
| 300 | 4391 TS3, PS3=12, Threshold: SC_D(35mV) & SC_A(31mV), |
||
| 301 | rate=400Hz @ 20uA, SC_A is 100% saturated when beam current larger than 20 uA, 10k events |
||
| 302 | 4392 TS3, PS3=0, Threshold: SC_D(35mV) & SC_A(31mV), |
||
| 303 | rate=400Hz @ 20uA, SC_A is 100% saturated when beam current larger than 20 uA, 570k events |
||
| 304 | |||
| 305 | 4393 TS6, PS6=0, Threshold: 20ADC (5mV), 2 out of 15 individual Cer inputs, |
||
| 306 | rate=1.4kHz @ 60uA, Cherenkov starts saturated at ~10 uA, 1.8M events |
||
| 307 | 4394 TS6, PS6=0, Threshold: 20ADC (5mV), 2 out of 15 individual Cer inputs, |
||
| 308 | rate=10kHz @ 8uA, Cherenkov starts saturated at ~10 uA, 307k events |
||
| 309 | |||
| 310 | ======================================================================== |
||
| 311 | 20230303 |
||
| 312 | |||
| 313 | ==HV scan for SC_A,SC_B,SC_C== |
||
| 314 | |||
| 315 | 4395 pedestal, beam off, HV off |
||
| 316 | 4396 pedestal, beam off, HV on, SC_B=-1600V, SC_C=-1600V |
||
| 317 | 4397 pedestal, beam off, HV on, SC_B=-1580V, SC_C=-1580V |
||
| 318 | 4398 pedestal, beam off, HV on, SC_B=-1590V, SC_C=-1590V |
||
| 319 | 4399 pedestal, beam off, HV on, SC_B=-1570V, SC_C=-1570V |
||
| 320 | 4400 pedestal, beam off, HV on, SC_B=-1600V, SC_C=-1600V |
||
| 321 | |||
| 322 | 4401 HV scan (SC_A,SC_B,SC_C) = (1500, 1550, 1550) |
||
| 323 | 4402 HV scan (SC_A,SC_B,SC_C) = (1510, 1560, 1560) |
||
| 324 | 4403 HV scan (SC_A,SC_B,SC_C) = (1520, 1570, 1570) |
||
| 325 | 4404 HV scan (SC_A,SC_B,SC_C) = (1530, 1580, 1580) |
||
| 326 | 4405 HV scan (SC_A,SC_B,SC_C) = (1540, 1590, 1590) |
||
| 327 | 4407 HV scan (SC_A,SC_B,SC_C) = (1510, 1600, 1570) |
||
| 328 | |||
| 329 | pedestal run result |
||
| 330 | run# ch7.00 ch7.01 ch7.02 ch7.03 ch7.04 ch7.05 ch7.06 ch7.07 ch7.08 ch7.09 ch7.10 ch7.11 ch7.12 ch7.13 ch7.14 ch7.15 ch8.00 ch8.01 ch8.02 ch8.03 ch8.04 ch8.05 ch8.06 ch8.07 ch8.08 ch8.09 ch8.10 ch8.11 ch8.12 ch8.13 ch8.14 ch8.15 |
||
| 331 | 4395 108.9 106.1 106.2 108.4 104.7 107.5 110.0 105.1 114.1 107.3 111.4 107.8 113.7 109.0 104.2 106.7 109.6 113.1 129.5 122.8 103.5 103.7 102.3 106.6 105.9 100.0 99.8 101.8 103.6 112.9 112.4 109.0 |
||
| 332 | 4396 108.8 106.1 106.1 108.3 104.7 107.4 109.9 105.3 114.2 107.3 111.4 107.7 113.8 109.2 104.3 106.9 110.1 120.8 149.8 123.0 103.5 103.8 229.4 106.4 105.8 101.9 99.9 102.0 103.8 113.0 112.3 109.0 |
||
| 333 | 4397 108.9 106.4 106.0 108.4 104.7 107.7 110.1 105.3 114.2 107.5 111.5 107.9 113.6 109.2 104.3 106.9 110.2 120.9 146.3 123.5 103.7 103.9 221.3 106.4 106.0 101.9 100.2 102.1 103.8 112.9 112.5 109.2 |
||
| 334 | 4398 108.8 106.2 106.0 108.3 104.7 107.6 109.7 105.3 114.3 107.4 111.5 108.0 113.6 109.3 104.3 107.0 110.4 120.4 146.4 123.2 103.6 103.7 218.4 106.4 105.8 101.7 100.0 101.7 103.7 112.9 112.6 109.2 |
||
| 335 | 4399 108.8 106.1 106.0 108.4 104.6 107.5 110.0 105.3 114.4 107.4 111.6 107.8 113.6 109.1 104.5 106.9 110.4 120.2 143.7 123.4 103.6 103.7 209.9 106.4 105.8 101.7 100.0 101.9 104.0 113.0 112.8 109.2 |
||
| 336 | 4400 108.8 106.1 106.0 108.4 104.6 107.6 110.1 105.1 114.2 107.2 111.6 107.9 113.6 109.0 104.4 106.9 110.2 120.2 148.0 122.9 103.5 103.8 222.2 106.5 105.8 101.7 100.0 101.8 103.9 113.0 112.8 109.2 |
||
| 337 | 4401 108.7 105.6 106.3 108.5 104.9 108.3 109.9 105.3 116.4 107.1 111.5 107.6 113.6 109.1 104.7 107.2 -68.8 342.6 117.8 -43.1 145.6 131.6 246.6 108.2 107.6 105.1 101.3 103.3 104.7 118.1 116.5 108.8 |
||
| 338 | 4419 108.7 105.1 105.1 108.2 104.6 107.5 109.5 104.7 113.6 106.9 111.2 107.5 113.1 109.3 104.6 106.7 108.7 118.5 147.2 121.6 103.0 103.6 206.0 106.8 105.9 101.7 100.6 102.4 103.4 113.1 112.0 108.9 |
||
| 339 | |||
| 340 | -------------------------------------------------------------- |
||
| 341 | 70uA cw beam on LD2 target |
||
| 342 | |||
| 343 | 4401 TS1 and TS4: PS1=3,PS4=1, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
||
| 344 | HV scan (SC_A,SC_B,SC_C) = (1500, 1550, 1550), rate=12.5kHz, daq saturated, 40M events |
||
| 345 | 4402 TS1 and TS4: PS1=3,PS4=1, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
||
| 346 | HV scan (SC_A,SC_B,SC_C) = (1510, 1560, 1560), rate=12.5kHz, daq saturated, 17.8M events |
||
| 347 | 4403 TS1 and TS4: PS1=5,PS4=3, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
||
| 348 | HV scan (SC_A,SC_B,SC_C) = (1520, 1570, 1570), rate=12.5kHz, daq saturated, 2.2M events |
||
| 349 | 4404 TS1 and TS4: PS1=6,PS4=4, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
||
| 350 | HV scan (SC_A,SC_B,SC_C) = (1530, 1580, 1580), rate=10.5kHz, 7.6M events |
||
| 351 | 4405 TS1 and TS4: PS1=6,PS4=4, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
||
| 352 | HV scan (SC_A,SC_B,SC_C) = (1540, 1590, 1590), rate=10.1kHz, 2.0M events |
||
| 353 | 4406 TS1 and TS4: PS1=6,PS4=4, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
||
| 354 | HV scan (SC_A,SC_B,SC_C) = (1540, 1590, 1590), rate=10.1kHz, 23.6M events |
||
| 355 | |||
| 356 | pedestal for HV scan runs |
||
| 357 | run# ch7.00 ch7.01 ch7.02 ch7.03 ch7.04 ch7.05 ch7.06 ch7.07 ch7.08 ch7.09 ch7.10 ch7.11 ch7.12 ch7.13 ch7.14 ch7.15 ch8.00 ch8.01 ch8.02 ch8.03 ch8.04 ch8.05 ch8.06 ch8.07 ch8.08 ch8.09 ch8.10 ch8.11 ch8.12 ch8.13 ch8.14 ch8.15 |
||
| 358 | 4400 108.8 106.1 106.0 108.4 104.6 107.6 110.1 105.1 114.2 107.2 111.6 107.9 113.6 109.0 104.4 106.9 110.2 120.2 148.0 122.9 103.5 103.8 222.2 106.5 105.8 101.7 100.0 101.8 103.9 113.0 112.8 109.2 |
||
| 359 | 4401 108.7 105.6 106.3 108.5 104.9 108.3 109.9 105.3 116.4 107.1 111.5 107.6 113.6 109.1 104.7 107.2 -68.8 342.6 117.8 -43.1 145.6 131.6 246.6 108.2 107.6 105.1 101.3 103.3 104.7 118.1 116.5 108.8 |
||
| 360 | 4402 109.1 105.7 105.9 108.1 104.5 107.7 109.3 105.0 114.0 107.0 111.0 107.4 113.6 108.7 104.0 107.1 96.4 127.7 143.8 122.5 109.8 111.0 209.3 107.1 106.4 102.1 100.7 102.6 103.7 114.6 112.7 109.0 |
||
| 361 | 4403 110.2 107.3 106.9 108.8 106.1 109.2 111.6 106.1 123.1 108.0 112.7 109.3 114.2 109.9 104.8 107.8 397.8 0.0 159.3 220.1 195.4 204.3 560.5 114.6 94.7 111.0 116.6 108.8 121.9 123.6 151.0 109.0 |
||
| 362 | 4404 110.1 107.1 107.7 109.1 105.9 109.2 111.2 106.2 123.0 108.3 112.5 109.2 114.7 110.1 104.9 108.3 391.0 0.0 263.0 239.3 194.9 204.3 589.1 113.9 95.9 110.8 116.2 109.0 122.1 128.2 151.0 109.2 |
||
| 363 | 4405 109.9 107.4 107.5 109.2 105.9 109.2 111.3 106.4 122.5 108.6 112.4 109.5 115.1 110.6 106.2 108.5 325.9 555.9 119.5 185.3 194.3 202.2 523.9 112.6 110.9 107.4 112.6 107.7 115.7 67.0 158.9 109.5 |
||
| 364 | 4406 109.9 107.6 107.4 109.3 106.1 109.1 111.3 106.5 121.0 108.7 112.4 109.5 115.1 110.4 106.3 108.8 287.6 687.8 68.9 145.7 193.5 192.7 473.0 112.7 114.0 109.7 111.3 106.4 112.4 94.9 131.0 109.6 |
||
| 365 | 4407 109.6 106.9 106.5 109.5 105.5 108.5 110.9 105.9 120.1 109.0 112.4 108.7 114.7 110.3 105.9 108.0 273.2 573.0 144.4 136.6 191.0 191.5 408.5 111.4 111.9 110.1 107.4 105.7 109.9 120.5 122.3 109.3 |
||
| 366 | 4408 109.2 106.4 106.8 108.6 105.2 108.0 110.9 105.2 118.2 108.1 111.8 108.7 114.7 110.2 105.3 107.7 194.4 419.4 9.5 -12.0 157.4 110.0 212.3 109.1 108.4 105.2 103.1 104.1 106.4 118.7 118.4 109.2 |
||
| 367 | 4419 108.7 105.1 105.1 108.2 104.6 107.5 109.5 104.7 113.6 106.9 111.2 107.5 113.1 109.3 104.6 106.7 108.7 118.5 147.2 121.6 103.0 103.6 206.0 106.8 105.9 101.7 100.6 102.4 103.4 113.1 112.0 108.9 |
||
| 368 | |||
| 369 | Conclusion: |
||
| 370 | HVs for (SC_D,SC_A,SC_B,SC_C) are (1150,1510,1600,1570). |
||
| 371 | Change to the above HVs. |
||
| 372 | |||
| 373 | --------------------------------------------------- |
||
| 374 | List of HVs: |
||
| 375 | board1, 6kV, 8-ch: |
||
| 376 | Name:_GEM00,__,__,_GEM01,_GEM10,_GEM11,__,_Cer_D |
||
| 377 | HV:_______0,_0,_0,_____0,_____0,_____0,_0,___950 |
||
| 378 | |||
| 379 | |||
| 380 | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
||
| 381 | HV:___1150,_1510,_1600,_0,_____930,____1040,_1570,___________1600,___________1820,___________1700,_____________860,____________1030,_____________960,___950,___950,___950 |
||
| 382 | |||
| 383 | --------------------------------------------------- |
||
| 384 | |||
| 385 | |||
| 386 | 4407 TS2: PS2=10, Threshold: SC_D(35mV) & SC_B(35mV), rate=7.5kHz @ 70uA, SC_D is partly saturated, 1.5M events |
||
| 387 | 4408 TS3, PS3=12, Threshold: SC_D(35mV) & SC_A(31mV), rate=0Hz @ 60uA, SC_A is 100% saturated |
||
| 388 | 4409 TS1,TS2,TS4, PS1=8,PS2=10,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 389 | threshold2= SC_D(35mV) & SC_B(35mV); threshold4=15mV(ShowerSum, Half MIP), |
||
| 390 | rate=10.1kHz @70uA on LD2 target, 17.3M events. |
||
| 391 | |||
| 392 | 4410 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 393 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 394 | rate=12.5kHz at 10uA (daq saturated by TS3 in low current), |
||
| 395 | rate=10.1kHz @70uA (TS3 will not take trigger due to SC_A is saturated when beam current >20uA), 6.2M events. |
||
| 396 | |||
| 397 | 4411 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 398 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 399 | Turned on EPICS script. 75M events. |
||
| 400 | |||
| 401 | 4412 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 402 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 403 | Turned on EPICS script. 10M events. |
||
| 404 | |||
| 405 | 4413 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 406 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 407 | Turned on EPICS script. 3.7M events. Ended run on trip (Run time: 03/04/23 13:16:10 - 13:22:31) |
||
| 408 | |||
| 409 | 4414 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 410 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 411 | Turned on EPICS script. 6.8M events. |
||
| 412 | Started Run afeter Beam Trip (no beam first 10 seconds) |
||
| 413 | Ended run on trip (Run time: 03/04/23 13:29:42 - 13:41:07) |
||
| 414 | |||
| 415 | 4415 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 416 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 417 | Turned on EPICS script. 3.8M events. |
||
| 418 | Started Run afeter Beam Trip (no beam first 2-3 seconds) |
||
| 419 | Ended run on trip (Run time: 03/04/23 13:41:38 - 13:48:03) |
||
| 420 | |||
| 421 | 4416 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 422 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 423 | Turned on EPICS script. 13.1M events. |
||
| 424 | |||
| 425 | 4417 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 426 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 427 | Turned on EPICS script. 8.8M events. |
||
| 428 | |||
| 429 | 4418 trash, no beam, HV on. Zero suppression is still on, basically no events |
||
| 430 | 4419 pedestal, no beam, HV on. Zero suppression is off. 100k events. |
||
| 431 | 4420 trash |
||
| 432 | 4421 pedestal, no beam, HV on. GEM2,GEM3,GEM4 are on. Zero suppression is off. 100k events. |
||
| 433 | 4422 pedestal, no beam, HV on. GEM2,GEM3,GEM4 are on. Zero suppression is off. 100k events. |
||
| 434 | |||
| 435 | |||
| 436 | ==use hallc_fadc_ssp config with EPICS, GEMs are on without GEM1== |
||
| 437 | 4423 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 438 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 439 | rate=3.7kHz @ 60uA, daq saturated, 660k events, Zero suppression is off |
||
| 440 | |||
| 441 | 4424 TS1,TS2,TS3,TS4, PS1=9,PS2=11,PS3=13,PS4=13, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 442 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 443 | rate=3.7kHz @ 60uA, daq saturated, 10M events, Zero suppression is off |
||
| 444 | |||
| 445 | == Zero suppression is off, use hallc_fadc config, no GEM== |
||
| 446 | 4425 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 447 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 448 | Turned on EPICS script. daq rate=10.3kHz @60uA, 2.8M events. |
||
| 449 | |||
| 450 | == Zero suppression is on== |
||
| 451 | 4426 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 452 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 453 | Turned on EPICS script. daq rate=10.3kHz @60uA, 44M events. |
||
| 454 | |||
| 455 | 4427 TS2, PS2=9, Threshold: SC_D(35mV) & SC_B(35mV), rate=12.7kHz @ 60uA, daq saturated, 533k events |
||
| 456 | 4428 TS2, PS2=10, Threshold: SC_D(35mV) & SC_B(35mV), rate=6.8kHz @ 60uA, 26.5M events |
||
| 457 | 4429 TS4, PS4=11, Threshold: ShowerSum(15mV, half MIP), rate=5.5kHz @ 60uA, 722k events |
||
| 458 | 4430 TS4, PS4=10, Threshold: ShowerSum(15mV, half MIP), rate=10.5kHz @ 60uA, 80M events |
||
| 459 | |||
| 460 | |||
| 461 | |||
| 462 | ==use hallc_fadc_ssp config with EPICS, GEMs are on without GEM1== |
||
| 463 | The following runs will be all trigger bits. |
||
| 464 | TS1,TS2,TS3,TS4, PS1=10,PS2=13,PS3=1,PS4=14, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 465 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 466 | Turned on EPICS script. |
||
| 467 | |||
| 468 | 4431 TS1,TS2,TS3,TS4, PS1=10,PS2=13,PS3=1,PS4=14, Zero suppression is on. daq rate=1.7kHz @60uA, 404k events. |
||
| 469 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3750,3750,3750) |
||
| 470 | |||
| 471 | == Zero suppression is off, GEMs are on without GEM1== |
||
| 472 | 4432 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13. daq rate=3.4kHz @60uA, >40M events. vmecrate crashed at ~6:55 AM March 5th, 2023 |
||
| 473 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3750,3750,3750) |
||
| 474 | |||
| 475 | detector start saturated after one night of data taking, need to find out when and which one |
||
| 476 | ==reboot solid vme crate== |
||
| 477 | |||
| 478 | 4433 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13, daq rate=1.4kHz @60uA, detectors are partly saturated. 1.1M events |
||
| 479 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3770,3770,3770) |
||
| 480 | |||
| 481 | 4434 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13, daq rate=1.4kHz @60uA, detectors are partly saturated. 1.6M events |
||
| 482 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3790,3790,3790) |
||
| 483 | |||
| 484 | 4435 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13, daq rate=1.4kHz @60uA, detectors are partly saturated. 1.2M events |
||
| 485 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), (CerB,CerC)=(950,950) |
||
| 486 | |||
| 487 | 4436 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13, daq rate=1.4kHz @60uA, detectors are partly saturated. 1.9M events |
||
| 488 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3830,3830,3830), (CerB,CerC)=(970,970) |
||
| 489 | |||
| 490 | 4437 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13, daq rate=1.4kHz @60uA, detectors are partly saturated. 1.0M events |
||
| 491 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3850,3850,3850), (CerB,CerC)=(990,990) |
||
| 492 | |||
| 493 | ==addjust PS1 to PS4== |
||
| 494 | 4438 TS1,TS2,TS3,TS4, PS1=8,PS2=11,PS3=1,PS4=12, daq rate=2.7kHz @60uA, detectors are partly saturated. 1.0M events |
||
| 495 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3850,3850,3850), (CerB,CerC)=(990,990) |
||
| 496 | |||
| 497 | ==addjust PS1== |
||
| 498 | 4439 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=12, daq rate=2.7kHz @60uA, detectors are partly saturated. 3.5M events |
||
| 499 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3850,3850,3850), (CerB,CerC)=(990,990) |
||
| 500 | |||
| 501 | 4440 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=12, daq rate=2.7kHz @60uA, detectors are partly saturated. 3.5M events |
||
| 502 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3870,3870,3870), (CerB,CerC)=(960,975) |
||
| 503 | |||
| 504 | ==addjust PS4== |
||
| 505 | 4441 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=11, daq rate=3.1kHz @60uA, detectors are partly saturated. 770k events |
||
| 506 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3870,3870,3870), (CerB,CerC)=(960,975) |
||
| 507 | |||
| 508 | ==no beam pedestal=== |
||
| 509 | 4442 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
||
| 510 | (CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 511 | 4443 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
||
| 512 | (CerA,CerB,CerC,CerD)=(950,960,975,950) |
||
| 513 | 4444 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
||
| 514 | (CerA,CerB,CerC,CerD)=(950,990,990,950) |
||
| 515 | 4445 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
||
| 516 | (CerA,CerB,CerC,CerD)=(950,970,970,950) |
||
| 517 | 4446-4448 trash |
||
| 518 | 4449 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
||
| 519 | (CerA,CerB,CerC,CerD)=(950,950,950,950) |
||
| 520 | 4450 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
||
| 521 | (CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 522 | 4451 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1510,1560,1560),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 523 | 4452 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1500,1550,1550),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 524 | 4453 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1520,1570,1570),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 525 | 4454 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1510,1600,1570),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 526 | 4455 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1510,1600,1570),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 527 | 4456 trash |
||
| 528 | 4457 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1510,1600,1570),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 529 | |||
| 530 | ==beam on, zero suppression is off== |
||
| 531 | --------------------------------------------------- |
||
| 532 | List of HVs: |
||
| 533 | board1, 6kV, 8-ch: |
||
| 534 | Name:_GEM00,__,__,_GEM01,_GEM10,_GEM11,__,_Cer_D |
||
| 535 | HV:_______0,_0,_0,_____0,_____0,_____0,_0,___950 |
||
| 536 | |||
| 537 | |||
| 538 | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
||
| 539 | HV:___1150,_1510,_1600,_0,_____930,____1040,_1570,___________1600,___________1820,___________1700,_____________860,____________1030,_____________960,___940,___980,___950 |
||
| 540 | |||
| 541 | |||
| 542 | 4458 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=11, NO GEM, daq rate=12.8kHz @20uA, daq was saturated. 2.1M events |
||
| 543 | 4459 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=11, NO GEM, daq rate=12.8kHz @25uA, daq was saturated. 4.3M events |
||
| 544 | 4460 TS1,TS2,TS3,TS4, PS1=6,PS2=12,PS3=10,PS4=11, NO GEM, daq rate=2.5kHz @25uA, some detectors are saturated. 577k events |
||
| 545 | 4461 TS1,TS2,TS3,TS4, PS1=6,PS2=10,PS3=8,PS4=10, NO GEM, daq rate=5.4kHz @30uA, some detectors are saturated. 1.0M events |
||
| 546 | 4462 TS1,TS2,TS3,TS4, PS1=6,PS2=10,PS3=1,PS4=10, NO GEM, daq rate=8.3kHz @35uA, some detectors are saturated. |
||
| 547 | daq rate=12.7kHz @50uA, daq is saturated. 9.8M events |
||
| 548 | 4463 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=10, NO GEM, daq rate=12.7kHz @50uA, some detectors are saturated. |
||
| 549 | daq is saturated. 544k events |
||
| 550 | 4464 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=12, NO GEM, daq rate=3.5kHz @55uA, some detectors are saturated. 1.0M events |
||
| 551 | ==disabled TS3== |
||
| 552 | 4465 TS1,TS2,TS4, PS1=6,PS2=11,PS4=12, NO GEM, daq rate=3.5kHz @50uA, some detectors are saturated. 556k events |
||
| 553 | 4466 TS1,TS2,TS4, PS1=6,PS2=11,PS4=11, NO GEM, daq rate=4.8kHz @50uA, some detectors are saturated. 514k events |
||
| 554 | 4467 TS1,TS2,TS4, PS1=5,PS2=10,PS4=10, NO GEM, daq rate=9.7kHz @55uA, some detectors are saturated. 46M events |
||
| 555 | rate=12.7kHz @ 49uA then detector partly saturated |
||
| 556 | 4468 TS1,TS2,TS4, PS1=5,PS2=10,PS4=10, NO GEM, daq rate=7.5kHz @60uA, some detectors are saturated. 53M events |
||
| 557 | |||
| 558 | ==turn on TS3, turn On GEM2,GEM3,GEM4== |
||
| 559 | 4469 TS1,TS2,TS3,TS4, PS1=6,PS2=12,PS3=10,PS4=12, daq rate=1.7kHz @60uA, some detectors are saturated, 157k events |
||
| 560 | 4470 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=11, daq rate=3.4kHz @60uA, some detectors are saturated, 78M events |
||
| 561 | |||
| 562 | ====================================================================== |
||
| 563 | 20230306 work done in the hall |
||
| 564 | 1) Replaced GEM gas bottle |
||
| 565 | 2) Fixed HV VBound problem for GEM1 |
||
| 566 | 3) Checked all cables in the DAQ end to avoid possible loose connection. Reconnect CerC0. Add CerB3 back into CerSum. |
||
| 567 | Addjusted the FIFO output offsets for CerA, CerB, CerC and CerD to zero, but keep the offset of CerSum as +10mV. |
||
| 568 | In order to compesate this +10mV offset, its DAC value in FADC config file has been updated from 3330 to 3300. |
||
| 569 | 4) Checked output offset for x10 amplifier that is used by SC_A, SC_B, SC_C and SC_D. It has +10mV~+14mV offsets. |
||
| 570 | However, the offset changes to ZERO if the input is a function generator. Is it a problem?) |
||
| 571 | 5) Change latency for TS1-TS4, all are aligned to SC_B. |
||
| 572 | A) SC_A: add 8ns delay to SC_A before it goes into x10 amplifier |
||
| 573 | B) SC_D: add 4ns deday by replacing the 3ns cable which is connecting the X10 amplifier to the FIFO with a 7ns cable |
||
| 574 | C) SC_C: add 15ns delay to SC_C before it goes into x10 amplifier |
||
| 575 | D) Shower: delay Shower L|R|T by 4ns before they go into FIFO, replay the 2ns calbles which are connected FIFO to summing |
||
| 576 | module by the 8ns cables. Therefore ShowerSum get 10ns extra delay |
||
| 577 | E) CerSum: replace the 8ns delay cable (connected the CerSum to a FIFO) by a 15ns delay cable |
||
| 578 | F) all cables, except LASPD_t and LASPD_b, go into Slot8 have 8ns delay |
||
| 579 | |||
| 580 | 6) Reconnect CerC0 at the detector end, this fix CerC0 problem! |
||
| 581 | |||
| 582 | 4471-4474 trash, debug detectors and daq |
||
| 583 | 4475 pedestal, beam off, all HV on, CerSum DAC=3300, GEM HVs(3400,3750,3750,3750) |
||
| 584 | 4476 pedestal, beam off, all HV on, CerSum DAC=3300, GEM HVs(3400,3750,3750,3750) |
||
| 585 | 4477 pedestal, beam off, all HV on, CerSum DAC=3300, GEM HVs(3470,3810,3810,3810) |
||
| 586 | |||
| 587 | --------------------------------------------------- |
||
| 588 | List of HVs: |
||
| 589 | board1, 6kV, 8-ch: |
||
| 590 | Name:__GEM1,__,__,__GEM2,__GEM3,__GEM4,__,_Cer_D |
||
| 591 | HV:____3470,_0,_0,__3810,__3810,__3810,_0,___950 |
||
| 592 | |||
| 593 | |||
| 594 | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
||
| 595 | HV:___1150,_1510,_1600,_0,_____930,____1040,_1570,___________1600,___________1820,___________1700,_____________860,____________1030,_____________960,___940,___980,___950 |
||
| 596 | |||
| 597 | 1 | Jixie Zhang | --------------------------------------------------- |
| 598 | 3 | Jixie Zhang | threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); -->ShowerSum is set to 15mV wrongly fro runs 4478-4490<--- |
| 599 | 2 | Jixie Zhang | threshold2= SC_D(35mV) & SC_B(35mV); |
| 600 | threshold3: SC_D(35mV) & SC_A(31mV), |
||
| 601 | threshold4=15mV(ShowerSum, Half MIP), |
||
| 602 | |||
| 603 | 4478 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=11, daq rate=3.7kHz @15uA, some detectors are saturated, 770k events |
||
| 604 | 4479 TS3,PS3=10, daq rate=1.7kHz @15uA, 270k events, CerC=950V |
||
| 605 | 4480 TS3,PS3=9, daq rate=170Hz @30uA, SC_A saturated, 132k events, CerC=930V |
||
| 606 | 4481 TS1,TS2,TS3,TS4, PS1=4,PS2=9,PS3=1,PS4=9, daq rate=3.7kHz @30uA, daq saturated, 870k events, CerC=930V |
||
| 607 | 4482 TS1,TS2,TS3,TS4, PS1=4,PS2=11,PS3=1,PS4=9, daq rate=3.7kHz @30uA, daq saturated, 970k events, CerC=910V |
||
| 608 | 4483 TS1,TS2,TS3,TS4, PS1=8,PS2=11,PS3=1,PS4=10, daq rate=3.7kHz @30uA, daq saturated, 2.1M events, CerC=900V |
||
| 609 | 4484 TS1,TS2,TS3,TS4, PS1=8,PS2=12,PS3=1,PS4=10, daq rate=3.7kHz @40uA, daq saturated, 1.0M events, CerC=920V |
||
| 610 | 1 | Jixie Zhang | 4485 TS1,TS2,TS3,TS4, PS1=10,PS2=12,PS3=1,PS4=10, daq rate=3.7kHz @60uA, daq saturated, 4.2M events, CerC=940V |
| 611 | 2 | Jixie Zhang | 4486 TS1,TS2,TS3,TS4, PS1=10,PS2=12,PS3=1,PS4=11, daq rate=3.7kHz @60uA, daq saturated, 6.8M events, CerC=950V |
| 612 | 3 | Jixie Zhang | |
| 613 | 2 | Jixie Zhang | From now on CerC=950V |
| 614 | 4487 TS2,PS2=11, daq rate=2.5kHz @60uA, 823k events |
||
| 615 | 4488 TS4,PS4=8, daq rate=3.7kHz @60uA, daq saturated, 783k events |
||
| 616 | 4489 TS1,TS2,TS3,TS4, PS1=8,PS2=12,PS3=8,PS4=10, daq rate=3.7kHz @60uA, daq saturated, 8.3M events |
||
| 617 | 4490 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=10, daq rate=3.4kHz @60uA, 71.7M events |
||
| 618 | 3 | Jixie Zhang | subrun 4490_06.evio and later have no HV on GEMs or CerD due to HV board tripped off |
| 619 | 2 | Jixie Zhang | |
| 620 | ========================================================================== |
||
| 621 | == MPOD Board A is off for the following runs, CerD and GEM detectors are using that board == |
||
| 622 | The MPod board A log shows that is was turned off at March 7, 01:37:29 |
||
| 623 | 3 | Jixie Zhang | subrun 4490_06.evio till run 4511 have all been affected |
| 624 | 2 | Jixie Zhang | |
| 625 | ==pedestal== |
||
| 626 | 4492 pedestal, no beam HV on |
||
| 627 | |||
| 628 | 4493 TS4,PS4=0, threshold: 15mV(ShowerSum), daq rate=2.9kHz @5uA, 456k events |
||
| 629 | |||
| 630 | ==GEM latency changed in file /home/solid/gem-cfg/ssp_apv_default.txt from 58 to 56 == |
||
| 631 | 4494 TS4,PS4=0, threshold: 120-190mV(ShowerSum), threshold changed during the run, 20uA, daq not saturated, 276k events |
||
| 632 | 4495 TS4,PS4=0, threshold: 140mV(ShowerSum), rate=3.7kHz @ 30uA, daq is saturated, 2.7M events |
||
| 633 | 4496 TS4,PS4=0, threshold: 250mV(ShowerSum), rate=2.8kHz @ 40uA, rate=3.7kHz @ 50uA, daq is saturated, 598k events |
||
| 634 | 4497 TS4,PS4=0, threshold: 280mV(ShowerSum), rate=3.4kHz @ 50uA, rate=1.0kHz @60uA, detector saturated, 680k events |
||
| 635 | 4498 TS4,PS4=0, threshold: 280mV(ShowerSum), rate=1.0kHz @60uA, detector saturated, 385k events |
||
| 636 | 4499 TS4,PS4=0, threshold: 200mV(ShowerSum), rate=3.7kHz @60uA, detector saturated, daq saturated, ~380k events, coda crashed |
||
| 637 | 4500 TS4,PS4=0, threshold: 250mV(ShowerSum), rate=3.7kHz @45uA, rate=1.8kHz @60uA, detector saturated at 45uA, ~380k events |
||
| 638 | 4501 TS4,PS4=0, threshold: 300mV(ShowerSum), rate=3.7kHz @45uA, rate=0.8kHz @60uA, detector saturated at 45uA, 101k events |
||
| 639 | |||
| 640 | 4502 TS1,PS1=7, threshold: 35mV(cerSum) & 70mV(ShowerSum), rate=1.7kHz @60uA, Cer saturated @ 20uA, ~583k events |
||
| 641 | 4503 TS1,PS1=6, threshold: 35mV(cerSum) & 70mV(ShowerSum), rate=3.4kHz @60uA, Cer saturated @ 20uA, 487k events, coda crashed |
||
| 642 | 4504 trash, ssp error |
||
| 643 | 4505 TS1,PS1=6, threshold: 35mV(cerSum) & 70mV(ShowerSum), rate=3.4kHz @60uA, Cer saturated @ 20uA, 1.2M events, coda crashed |
||
| 644 | |||
| 645 | 4506 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=10, daq rate=3.4kHz @60uA, 487k events, coda crashed |
||
| 646 | 4507 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=11, daq rate=3.4kHz @60uA, 817k events, coda crashed |
||
| 647 | |||
| 648 | ==I found that if I am copying data to /cache from the same hard drive that coda is using, coda will crash == |
||
| 649 | |||
| 650 | 4508 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=11, daq rate=3.7kHz @50uA, daq is saturated, 580k events, |
||
| 651 | 4509 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=12, daq rate=3.7kHz @50uA, daq is saturated, 1.2M events, |
||
| 652 | |||
| 653 | 4510 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=12, daq rate=3.7kHz @50uA, daq is saturated, 2.2M events, |
||
| 654 | 4511 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.0kHz @50uA, 1.7M events, |
||
| 655 | |||
| 656 | == MPOD Board A is off for the above runs, CerD and GEM detectors are using that board == |
||
| 657 | The MPod board A log shows that it was turned off at March 7, 01:37:29 |
||
| 658 | run 4490_06.evio till run 4511 have all been affected |
||
| 659 | ========================================================================== |
||
| 660 | |||
| 661 | 4512 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, 6.2M events, |
||
| 662 | 4513 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, 1.2M events, |
||
| 663 | |||
| 664 | 4514 trash, TS1,PS1=8, threshold: 20mV(CerSum) & 70mV(ShowerSum), 1.4k events, no beam, epics events only |
||
| 665 | |||
| 666 | ==change CerSum threshold from 35mV to 25mV, this will be 2.5 pe after Cer gainmatch== |
||
| 667 | 4515 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, ~7M events, |
||
| 668 | 4516 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, ~6M events, |
||
| 669 | 4517 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, 47M events, |
||
| 670 | 4518 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, 6.5M events, |
||
| 671 | |||
| 672 | 4519 TS1,PS1=7, threshold: 20mV(CerSum) & 70mV(ShowerSum), rate=2.3kHz @ 50uA, 650k events, |
||
| 673 | |||
| 674 | == GEM2 started to show problem from here == |
||
| 675 | |||
| 676 | 4520 trash, TS2,PS2=10, threshold: 35mV(SC_D) & 35mV(SC_B), SSP err, coda crashed after 1.4k events |
||
| 677 | 4521-4530 trash, ssp error, coda crashed or could not start |
||
| 678 | |||
| 679 | ==11:10 power cycle MPD vme srate |
||
| 680 | ==power cycle the GEM vme crate by the following cmd: == |
||
| 681 | crate_power solidcrate1 0 #turn off crate |
||
| 682 | crate_power solidcrate1 1 #turn on crate |
||
| 683 | --------------------------------------------------------- |
||
| 684 | |||
| 685 | ==11:25 SC_A HV tripped at 11:02, can not bring it back, reboot MPOD |
||
| 686 | 4531 trash, ssp error |
||
| 687 | ==switch to hallc_fadc config, no GEM== |
||
| 688 | 4532 TS4,PS4=0, threshold: 280mV(ShowerSum), rate=900Hz @60uA, detector saturated, ~280k events |
||
| 689 | 4533 TS4,PS4=0, threshold: 180mV(ShowerSum), rate=8.4kHz @60uA, detector saturated, ~2.6M events |
||
| 690 | 4534 TS4,PS4=0, threshold: 180mV(ShowerSum), rate=8.4kHz @60uA, detector saturated, ~7.1M events |
||
| 691 | |||
| 692 | ==switch to hallc_fadc_ssp config, reboot solidcrate1, power cycle LV== |
||
| 693 | 4535-4436 trash, ssp error |
||
| 694 | |||
| 695 | ==reboot sbsvme22 == |
||
| 696 | ==powered off LV, wait 10s, then powered it on== |
||
| 697 | 4537-4439 trash, ssp error |
||
| 698 | |||
| 699 | ==switch to hallc_fadc config, no GEM== |
||
| 700 | 4540 TS4,PS4=0, threshold: 180mV(ShowerSum), rate=12.7kHz @45uA, rate=8.4kHz @60uA, |
||
| 701 | detector saturated if beam current>45uA, 22M events |
||
| 702 | |||
| 703 | ==GEM latency changed in file /home/solid/gem-cfg/ssp_apv_default.txt from 56 to 60???? == |
||
| 704 | |||
| 705 | 12:25 HV increased to HV setting1 (?,?,?,?) |
||
| 706 | 4541-4560 debugging GEMs, GEM HV scan, Latency scan, they are not production data for GEM |
||
| 707 | |||
| 708 | TS1,TS2,TS3,TS4, PS1=7,PS2=10,PS3=8,PS4=0, |
||
| 709 | 4547 400k |
||
| 710 | 4553 12M |
||
| 711 | |||
| 712 | ==GEM2 is disabled, GEM HVs(3650,3900,3900,3900)== |
||
| 713 | 13:09, HV increased to HV setting2 (3650,3900,3900,3900) |
||
| 714 | 4554 300k |
||
| 715 | 4555 300k |
||
| 716 | 4556 14M |
||
| 717 | 4557 50k |
||
| 718 | 4558 14M |
||
| 719 | 4559 600k |
||
| 720 | |||
| 721 | 4560 TS1,TS2,TS3,TS4, PS1=7,PS2=10,PS3=8,PS4=0, rate=4.6kHz @40uA, daq is saturated, 9.2M events, |
||
| 722 | Most of the events are TS4, |
||
| 723 | 4561 TS4,PS4=0, threshold: 210mV(ShowerSum), rate=4.0kHz @40uA, ~17M events |
||
| 724 | |||
| 725 | 4562-4564 trash |
||
| 726 | |||
| 727 | ==GEM latency scan start== |
||
| 728 | 4565 TS4,PS4=0, threshold: 210mV(ShowerSum), 2.9M events, latency=58 |
||
| 729 | 4566 TS4,PS4=0, threshold: 210mV(ShowerSum), 126k events, latency=56 |
||
| 730 | 4567 TS4,PS4=0, threshold: 210mV(ShowerSum), 202k events, latency=59 |
||
| 731 | 4568 TS4,PS4=0, threshold: 210mV(ShowerSum), 132k events, latency=62 |
||
| 732 | 4569 TS4,PS4=0, threshold: 210mV(ShowerSum), 193k events, latency=65 |
||
| 733 | 4570 TS4,PS4=0, threshold: 210mV(ShowerSum), 284k events, latency=68 |
||
| 734 | 4571 TS4,PS4=0, threshold: 210mV(ShowerSum), 157k events, latency=53 |
||
| 735 | 4572 TS4,PS4=0, threshold: 210mV(ShowerSum), 476k events, latency=50 |
||
| 736 | ==GEM latency scan end== |
||
| 737 | |||
| 738 | == production without GEM since latency not know yet == |
||
| 739 | 4573 TS4,PS4=0, threshold: 180mV(ShowerSum), rate=7.5kHz @40uA, 19.5M events |
||
| 740 | |||
| 741 | == production with GEM == |
||
| 742 | == MPOD board B tripped off == |
||
| 743 | |||
| 744 | 4574 trash,TS4,PS4=0, threshold: 210mV(ShowerSum), MPOD board B tripped off, HVs are ramping up |
||
| 745 | |||
| 746 | 4575 TS4,PS4=0, threshold: 210mV(ShowerSum), rate=4.0kHz @40uA, 12M events,latency=57 |
||
| 747 | 4576 TS4,PS4=0, threshold: 210mV(ShowerSum), rate=4.0kHz @40uA, 4.8M events,latency=59 |
||
| 748 | 4577 TS4,PS4=0, threshold: 210mV(ShowerSum), rate=4.0kHz @40uA, 44M events,latency=58 |
||
| 749 | 1 | Jixie Zhang | From subrun 43, beam current went up to 50uA, daq saturated |
| 750 | 4578 TS2,PS2=10, Threshold: SC_D(35mV) & SC_B(35mV), rate=4.6kHz @50uA, daq saturated, 685k events,latency=58 |
||
| 751 | 4579 TS2,PS2=11, Threshold: SC_D(35mV) & SC_B(35mV), rate=2.7kHz @50uA, 7.4M events,latency=58 |
||
| 752 | 4580 TS1,PS1=6, Threshold1: CerSum(25mV, 2.5pe) & ShowerSum(70mV), rate=4.3kHz @50uA, 5.4M events,latency=58 |
||
| 753 | 3 | Jixie Zhang | 4581 TS1,PS1=7, Threshold1: CerSum(25mV, 2.5pe) & ShowerSum(70mV), rate=2.2kHz @50uA, 13M events,latency=58 |
| 754 | 4582 TS4,PS4=11, threshold: 15mV(ShowerSum), rate=900Hz @45uA, 828k events,latency=58 |
||
| 755 | 4583 TS4,PS4=9, threshold: 15mV(ShowerSum), rate=3.5kHz @45uA, 9M events,latency=58 |
||
| 756 | 4584 TS4,PS4=9, threshold: 15mV(ShowerSum), rate=2.1kHz @40uA, 180k events,latency=58 |
||
| 757 | 4585 TS4,PS4=8, threshold: 15mV(ShowerSum), rate=4.1kHz @40uA, 912k events,latency=58 |
||
| 758 | rate=4.5kHz @50uA, beam curent go up to 50uA at the end so daq was almost or already saturated |
||
| 759 | 4586 TS4,PS4=9, threshold: 15mV(ShowerSum), rate=2.1kHz @50uA, 19.5M events,latency=58 |
||
| 760 | |||
| 761 | |||
| 762 | ==GEM latency scan start== |
||
| 763 | 4587 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 28k events,latency=58 |
||
| 764 | 4588 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 118k events,latency=60 |
||
| 765 | 4589 trash, ssp error |
||
| 766 | 4590 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 30k events,latency=62 //can not cook this run |
||
| 767 | 4591 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 30k events,latency=64 |
||
| 768 | 4592 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 40k events,latency=56 |
||
| 769 | 4593 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 33k events,latency=54 |
||
| 770 | 4594 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 38k events,latency=52 |
||
| 771 | 4595 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 54k events,latency=62 |
||
| 772 | 4596 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 31k events,latency=59 |
||
| 773 | 4597 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 38k events,latency=57 |
||
| 774 | ==GEM latency scan end== |
||
| 775 | |||
| 776 | |||
| 777 | 4598 TS4,PS4=0, threshold: 210mV(ShowerSum), rate=3.5kHz @40uA, 9.3M events,latency=57 |
||
| 778 | 4599 trash, no beam |
||
| 779 | |||
| 780 | 4600 pedestal, beam off HV on |
||
| 781 | |||
| 782 | ====GEM latency changed to 57====== |
||
| 783 | 4601-4607 trash, debug GEM |
||
| 784 | |||
| 785 | 4608-4609 pedestal, beam off, HV on |
||
| 786 | |||
| 787 | 4611 TS4,PS4=0 threshold: 230mV (ShowerSum), rate=3.0 kHz @40uA, 700K events |
||
| 788 | 4612 TS4,PS4=0 threshold: 230mV (ShowerSum), rate=2.7 kHz @40uA, 8.6M events |
||
| 789 | 4613 TS4,PS4=0 threshold: 230mV (ShowerSum), rate=2.7 kHz @40uA, 6.5M events |
||
| 790 | 4614 TS1,PS1=8 threshold: 25mV(CerSum) & 70mV(ShowerSum), rate= 0.4kHz @40uA, 15K events |
||
| 791 | 4615 junk |
||
| 792 | 4616 TS1,PS1=6 threshold: 25mV(CerSum) & 70mV(ShowerSum), rate=1.2kHz, 40k events |
||
| 793 | 4617 TS1,PS1=6 threshold: 25mV(CerSum) & 70mV(ShowerSum), rate=1.2kHz, 80k events |
||
| 794 | 4618 TS1,PS1=5 threshold: 25mV(CerSum) & 70mV(ShowerSum), rate=2.2kHz, 4.4M, beam tripped for the last 20 minutes |
||
| 795 | kcoda after run 4618. The Event Rate gui in CODA disappeared. |
||
| 796 | 4619 TS1,TS4,PS1=5,PS4=2 threshold: TS1:25mV(CerSum) & 70mV(ShowerSum),TS4:230mV,rate=3.0kHz, 7.6M |
||
| 797 | ------ CODA Error, ER1. Had to kcoda |
||
| 798 | 4620 TS1,TS4,PS1=5,PS4=2 threshold: TS1:25mV(CerSum) & 70mV(ShowerSum),TS4:230mV,rate=3.0kHz, 4M events----- CODA crash |
||
| 799 | 4621 TS1,PS1=5 threshold: 25mV(CerSum) & 70mV(ShowerSum),rate=2.2kHz, 4.6M events |
||
| 800 | 4622 TS1,PS1=5 threshold: 25mV(CerSum) & 70mV(ShowerSum),rate=2.2kHz, 13M events |
||
| 801 | 4623 TS2,PS2=11 threshold: 35mV(SC_B) & 35mV(SC_D),rate=2.3kHz, 13M events |
||
| 802 | 4624 trash, TS3,PS3=10,threshold: 31mV(SC_A) & 35mV(SC_D), no beam |
||
| 803 | 4625 pedestal, beam off, HV on |
||
| 804 | 4626 pedestal, beam off, HV on |
||
| 805 | 4627 TS1,TS2,PS1=7,PS2=11, threshold: TS1:25mV(CerSum) & 70mV(ShowerSum),TS2=35mV(SC_B) & 35mV(SC_D), |
||
| 806 | expected_rate=0.7kHz+2.3kHz,5M events |
||
| 807 | 4628 TS4 low, PS4=9, threshold: 15mV(ShowerSum), rate=3kHz, 20M |
||
| 808 | 4629 TS4 high, PS4=0, threshold: 230mV(ShowerSum), rate=3.7kHz DAQ saturated, increasing threshold |
||
| 809 | 4630 TS4 high, PS4=0, threshold: 340mV(ShowerSum), rate=800Hz, decreasing threshold slightly |
||
| 810 | 4631 TS4 high, PS4=0, threshold: 310mV(ShowerSum), rate=1.4kz, leaving threshold here in case of 70uA beam, 18M events |
||
| 811 | 4632 TS2, PS2=11 threshold: 35mV(SC_B) & 35mV(SC_D),rate=2.2kHz, 30M events |
||
| 812 | 4633 TS4 low, PS4=9, threshold: 15mV(ShowerSum), rate= 3.0kHz events 19.9 M |
||
| 813 | 4634 TS4 low, PS4=9, threshold: 15mV(ShowerSum), rate= 3.0kHz, events 16.9 M |
||
| 814 | 4635 TS1, PS1=5, threshold: 25mV(CerSum) & 70mV(ShowerSum), rate= 3.1kHz,10M events: 1 hour run |
||
| 815 | 4636 TS1, PS1=5, threshold: 25mV(CerSum) & 70mV(ShowerSum), rate= 3.1kHz,15M events: 2 hour run |
||
| 816 | 4637 TS1, PS1=5, threshold: 25mV(CerSum) & 70mV(ShowerSum), rate= 3.1kHz,1.4M events: 20 minutes, |
||
| 817 | ----Mike"I think 3 hours and 20 minutes is good on TS1. Take some T2" |
||
| 818 | 4638 TS2, PS2=11 threshold: 35mV(SC_B) & 35mV(SC_D),rate=2.2kHz. Testing Prescale. 70k events |
||
| 819 | 4639 TS2, PS2=10 threshold: 35mV(SC_B) & 35mV(SC_D),rate=4.2kHz, daq Saturated, 70k events |
||
| 820 | ----Mike"I thought I could adjust the prescale, but the rate was 4 kHz. Going back ps2=11 |
||
| 821 | 4640 TS2, PS2=11 threshold: 35mV(SC_B) & 35mV(SC_D),rate=2.2kHz, ~3.2M events have GEM data |
||
| 822 | ----end of this run, HV for GEMS and CerD were off at 14:23, part of subrun 5, whole subrun 6,7 have no GEM data |
||
| 823 | 4641 junk, TS1, TS2,TS4, PS2=11,PS4=0 threshold: 35mV(SC_B) & 35mV(SC_D),rate=4,1kHz, ----Junk, enabled TS1 as well. |
||
| 824 | 4642 junk, ----- CODA error (SSP timeout). will Reset CODA, download |
||
| 825 | 4643 Junk, -----CODA error |
||
| 826 | 4644 TS2, PS2=11,PS4=0 threshold2: 35mV(SC_B) & 35mV(SC_D), threshold4: 370mV, rate= 2.6 kHz. HV for GEM or CerD is off. 1.1M events NO GEM |
||
| 827 | 4645 TS2, PS2=11,PS4=0 threshold2: 35mV(SC_B) & 35mV(SC_D), threshold4: 370mV, rate= 2.6 kHz. GEMS are back on. 9.6M events |
||
| 828 | 4646 TS2, PS2=11,PS4=0 threshold2: 35mV(SC_B) & 35mV(SC_D), threshold4: 370mV, rate= 2.6 kHz. 6.4M events |
||
| 829 | 4647 TS3, PS3=10, threshold: 31mV(SC_A) & 35mV(SC_D), rate=430Hz @45uA, rate=3.3kHz @20uA. 198k events (very clean, daq never saturated) |
||
| 830 | 4648 TS3, PS3=8, threshold: 31mV(SC_A) & 35mV(SC_D), rate=1.7kHz @45uA, 1.9M events (daq saturated at 10uA<I<35uA, need to apply bcm cut) |
||
| 831 | 4649 TS3, PS3=10, threshold: 31mV(SC_A) & 35mV(SC_D), rate=0.4kHz @45uA, rate=3.3kHz @20uA, 2M events (very clean, daq never saturated) |
||
| 832 | |||
| 833 | 4650 TS3,TS2, PS3=8,PS2=12, threshold3: 31mV(SC_A) & 35mV(SC_D), rate=1.8kHz @45uA, threshold2: 35mV(SC_B) & 35mV(SC_D),rate=1.1kHz @45uA, |
||
| 834 | expected_rate=1.8+1.1=2.9kHz @45 uA, daq will be ssaturated at 10uA<I<35uA, need to apply bcm cut |
||
| 835 | Actual rate is ~2.7kHz, 19M |
||
| 836 | 4651 TS3,TS2, PS3=8,PS2=12, threshold3: 31mV(SC_A) & 35mV(SC_D) && threshold2: 35mV(SC_B) & 35mV(SC_D), rate=2.7k, 10.5M events. Beam tripped for the last 20 minutes |
||
| 837 | 4652 TS3,TS2, PS3=8,PS2=12, threshold3: 31mV(SC_A) & 35mV(SC_D) && threshold2: 35mV(SC_B) & 35mV(SC_D), rate=2.7k, 20.5M events |
||
| 838 | 4653 TS3,TS2, PS3=8,PS2=12, threshold3: 31mV(SC_A) & 35mV(SC_D) && threshold2: 35mV(SC_B) & 35mV(SC_D), rate=2.7k, 38M events |
||
| 839 | |||
| 840 | 4654 TS4_high, PS4=0, threshold: 310mV(ShowerSum), rate=2.7kHz @48uA, 0.5kHz@65uA. Detector partly saturated. 1.1M events |
||
| 841 | 4655 TS4_low, PS4=11, threshold: 15mV(ShowerSum), rate=3.7kHz @70uA. daq saturated. 110k events |
||
| 842 | 4656 TS4_low, PS4=12, threshold: 15mV(ShowerSum), rate=1.9kHz @70uA. 6.2M events |
||
| 843 | 4657 TS4_low, PS4=12, threshold: 15mV(ShowerSum), rate=1.5kHz @80uA. 926k events |
||
| 844 | |||
| 845 | 4658 pedestal, beam off, HVs on |
||
| 846 | |||
| 847 | 4659 TS4_low, PS4=12, threshold: 15mV(ShowerSum), rate=2.7kHz @48uA, 1.9kHz@70uA. 5.5M events, stoped because of HV issues |
||
| 848 | From the raw data, It seemed that the MPOD HV started to have have problem since 19:02, subrun 8. When it happened, |
||
| 849 | no more triggers come to the coda. We will need to look into the data to verify this. |
||
| 850 | |||
| 851 | 4660 TS4 low, PS4=10, threshold: 15mV(ShowerSum), NO GEM. rate=1.5kHz @50uA, 422k |
||
| 852 | |||
| 853 | 4661 TS4_low, PS4=12, threshold: 15mV(ShowerSum), With GEM. 20k events. |
||
| 854 | CODA did not show ER rates, stop this run to restart coda. |
||
| 855 | 4662 TS4_low, PS4=12, threshold: 15mV(ShowerSum), With GEM. rate=2.6kHz @67uA, 250k events. |
||
| 856 | CODA did not show ER rates, stop this run to restart coda. |
||
| 857 | 4663 TS4_low, PS4=12, threshold: 15mV(ShowerSum), With GEM. rate=2.6kHz @67uA, 5.1M events. |
||
| 858 | CODA crashed at the end |
||
| 859 | 4664 TS4_low, PS4=12, threshold: 15mV(ShowerSum), With GEM. rate=2.6kHz @67uA, 1.3M events. |
||
| 860 | |||
| 861 | 4665 TS1, PS1=7, threshold: 25mV(CerSum) & 70mV(ShowerSum), rate= 1.8kHz @65uA, 505k events |
||
| 862 | 4666 TS1,TS4_low, PS1=7, PS4=12, threshold1: 25mV(CerSum) & 70mV(ShowerSum), threshold4: 15mV(ShowerSum), |
||
| 863 | expected_rate=1.8+1.3=3.1kHz @65uA, actrual_rate=3.0kHz @65uA, 6.0M events |
||
| 864 | |||
| 865 | 4667 TS1,TS4_low, PS1=7, PS4=12, threshold1: 25mV(CerSum) & 70mV(ShowerSum), threshold4: 15mV(ShowerSum), |
||
| 866 | rate=3.0kHz @65uA, 45M events |
||
| 867 | 4668 TS1,TS4_low, PS1=7, PS4=12, threshold1: 25mV(CerSum) & 70mV(ShowerSum), threshold4: 15mV(ShowerSum), |
||
| 868 | rate=3.0kHz @65uA, 10.2M good events with GEM. HV board for GEM and CERD was tripped off at 9:31. |
||
| 869 | Part of subrun 16 is affected, full subruns 17-18 are affected. |
||
| 870 | 4669 TS3, PS=10, threshold 31mV(SC_A)&&35mV(SC_D), rate up to 3.7 kHz when beam is >30 uA, |
||
| 871 | beam was very trippy taking data on beam ramp ups, 2.5M events |
||
| 872 | |||
| 873 | 4670 Pedestal run, 100k pulser triggers, beam off, HV on |
||
| 874 | |||
| 875 | 4671 TS1, PS=0, threshold: 40mV(CerSum)&&210mV(ShowerSum), first ~1.5k events with 10uA beam, rest of data up to 3.5kHz, 150k events |
||
| 876 | 4672 TS1, PS=0, threshold: 40mV(CerSum)&&300mV(ShowerSum), rate 450Hz, 70uA, 340k events |
||
| 877 | |||
| 878 | 4673 TS1, PS=0, threshold: 40mV(CerSum)&&300mV(ShowerSum), rate=2.3kHz @40uA, rate 450Hz @70uA, 84k events |
||
| 879 | When the bema ramping up, diaggui scaler rate: TS2=220kHz, TS3=800kHz @10uA, |
||
| 880 | |||
| 881 | 4674 TS4, PS4=0, threshold: 310mV(ShowerSum), rate=3.0kHz @45uA, rate 500Hz @70uA, 102k events |
||
| 882 | 4675 TS3, PS=11, threshold 31mV(SC_A)&&35mV(SC_D), rate = 70Hz @ ~40uA, rate=0Hz @70uA, 40k events |
||
| 883 | 4676 TS3, PS=8, threshold 31mV(SC_A)&&35mV(SC_D), rate = 3.7kHz @ ~15uA,daq saturated, 671k events |
||
| 884 | |||
| 885 | 4677 TS1,TS3,TS4: PS1=0,PS3=10,PS4=0, |
||
| 886 | threshold1 = 40mV(CerSum, 4pe) && 230mV(ShowerSum), threshold3: 31mV(SC_A)&&35mV(SC_D), threshold4= 340mV(ShowerSum), |
||
| 887 | rate=260Hz @70uA, 280k events |
||
| 888 | |||
| 889 | 4678 TS1,TS3,TS4: PS1=0,PS3=10,PS4=0, 41k events, rate=260Hz @5uA |
||
| 890 | |||
| 891 | 4679 TS1 TS4, determine threshold, threshold1 = 25mV(CerSum, 2.5pe) && 70mV(ShowerSum) --> 250Hz @5uA |
||
| 892 | threshold4= 120mV(ShowerSum) --> 450Hz @5uA, 82k event. threshold are channgingduring this run |
||
| 893 | |||
| 894 | 4680 TS1,TS3,TS4: PS1=0,PS3=7,PS4=0, |
||
| 895 | threshold1 = 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), threshold3: 31mV(SC_A)&&35mV(SC_D), threshold4= 120mV(ShowerSum), |
||
| 896 | rate=2.6kHz @ 5uA |
||
| 897 | |||
| 898 | 4681 TS1,TS3,TS4: PS1=0,PS3=7,PS4=0, |
||
| 899 | threshold1 = 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), threshold3: 31mV(SC_A)&&35mV(SC_D), threshold4= 120mV(ShowerSum), |
||
| 900 | 151k events, beam current ramping up from 5uA to 40uA |
||
| 901 | |||
| 902 | 4682 TS4_high, PS4=0, threshold: 310mV(ShowerSum), rate=2.3kHz @45uA, 0.6kHz@65uA. 762k events |
||
| 903 | 4683 TS4_high, PS4=0, threshold: 310mV(ShowerSum), rate=2.3kHz @45uA, 0.6kHz@65uA. 43k events |
||
| 904 | |||
| 905 | 4684 TS1,TS4: PS1=7,PS4=0, threshold1=25mV(CerSum, 2.5pe) && 70mV(ShowerSum), threshold4=310mV(ShowerSum), |
||
| 906 | rate=2.2kHz @65uA, 25.5M events, approx 50% each trigger |
||
| 907 | |||
| 908 | 4685 TS2,TS4_high: PS2=12, PS4=0, threshold2: 35mV(SC_B)&&35mV(SC_D) threshold4: 280mV(ShowerSum), rate=2.5kHz @ 65uA, |
||
| 909 | detectors partially saturated, 16.5M events |
||
| 910 | |||
| 911 | 4686 TS2,TS4_high: PS2=12, PS4=0, threshold2: 35mV(SC_B)&&35mV(SC_D) threshold4: 280mV(ShowerSum), rate=2.5kHz @ 65uA, |
||
| 912 | detectors partially saturated, 43.1M events |
||
| 913 | |||
| 914 | 4687 pedestal, beam off, HVs on |
||
| 915 | 4688 pedestal, beam off, HVs off |
||
| 916 | |||
| 917 | |||
| 918 | ---------------------------------------------------------------------------------------- |
||
| 919 | vmeDSC map: |
||
| 920 | TS1: DSC01 (CerSum, 25mV) & DSC03(ShowerSum, 70mV) --> PS1>=5 |
||
| 921 | TS2: DSC06 (SC_B, 35mV) & DSC07(SC_D, 35mV) --> PS2>=11 |
||
| 922 | TS3: DSC05 (SC_A, 31mV) & DSC08(SC_D, 35mV) --> requires I<20uA, PS2>=10 |
||
| 923 | TS4_low: DSC14 (ShowerSum, 15mV) --> PS>=10 for 40uA |
||
| 924 | TS4_high: DSC14 (ShowerSum, 230mV) --> keep PS4=0, 40uA(230mV-->2.7kHz) |
||
| 925 | |||
| 926 | other unused channels: |
||
| 927 | DSC04 ShowerSum |
||
| 928 | |||
| 929 | http://solidcrate1.jlab.org/ |
||
| 930 | |||
| 931 | Maximum daq rate : 3.7kHz for 4 GEMS, 4.6kHz for 3 GEMs, 12.7kHz for no GEMs |
||
| 932 | Suggested daq operation rate: |
||
| 933 | 3kHz for 4 GEMs |
||
| 934 | 4kHz for 3 GEMs |
||
| 935 | 9kHz for no GEMs |
||
| 936 | |||
| 937 | Run summary: Sum stats for runs in 4611-4686 |
||
| 938 | TS4_low: 104M |
||
| 939 | TS2: 113M |
||
| 940 | TS1: 103M |
||
| 941 | 4 | Jixie Zhang | TS4_High: 79M |
| 942 | 3 | Jixie Zhang | TS3: 60M |