Hallc beamtest runlist 18deg » History » Version 5
Jixie Zhang, 03/20/2023 09:30 AM
| 1 | 2 | Jixie Zhang | |
|---|---|---|---|
| 2 | ==================== Start of 18 deg =================================== |
||
| 3 | 20232020 |
||
| 4 | 1 | Jixie Zhang | |
| 5 | 5 | Jixie Zhang | 4286 - 4293 GEM cosmic |
| 6 | 2 | Jixie Zhang | |
| 7 | 20230221 Work done in the Hall or the counting house: |
||
| 8 | 1 | Jixie Zhang | |
| 9 | 2 | Jixie Zhang | 1) Moved bunker to new location, push detector stand & table to 18deg. Align the table to the target with laser pen. |
| 10 | 5 | Jixie Zhang | 2) GEM detectors: |
| 11 | 2 | Jixie Zhang | A) Use NEW LV cable which can connect to the LV board in the MPOD crate |
| 12 | B) Install 1x1 foot poly shileding |
||
| 13 | C) Align the trigger latency for all 4 triggers within 20ns |
||
| 14 | 3) SC, PreShower and Shower detectors: |
||
| 15 | A) Change triggers TS2 as "SC_D & SC_B", TS3 as "SC_A & SC_D", remove TS5 |
||
| 16 | B) Connect SC_A,SC_B,SC_C and SC_D to x10 multiplier |
||
| 17 | 1 | Jixie Zhang | C) Align trigger latency between TS1,TS2,TS3 and TS4 within 4ns using function generator |
| 18 | 2 | Jixie Zhang | D) Increase LASPD HVs by 10% from (T,B)=(800,900) to (880,990) |
| 19 | E) Preshower averaged pulse height is ~40ADC, increase their HVs(L,R,T) from (1470,1740,1680) to (1515,1800,1730), |
||
| 20 | 5 | Jixie Zhang | which is determined from the cosmic and gain matched on Jan 11th. |
| 21 | 4) Do pedestal run for FADC without HVs. FADC configuration file is updated to match the above changes and the new pedestal. |
||
| 22 | 2 | Jixie Zhang | |
| 23 | --------------------------------------------------- |
||
| 24 | List of HVs: |
||
| 25 | board1, 6kV, 8-ch: |
||
| 26 | Name:_GEM00,__,__,_GEM01,_GEM10,_GEM11,__,_Cer_D |
||
| 27 | HV:____3400,_0,_0,__3750,__3750,__3750,_0,___950 |
||
| 28 | |||
| 29 | |||
| 30 | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
||
| 31 | HV:___1100,_1500,_1600,_0,_____880,_____990,_1600,___________1515,___________1800,___________1730,_____________850,____________1030,_____________970,___950,___950,___950 |
||
| 32 | --------------------------------------------------- |
||
| 33 | |||
| 34 | |||
| 35 | 4297-4298 pedestal, beam off, HV off, pulse trigger |
||
| 36 | 1 | Jixie Zhang | 4299-4300 trash, SSP lost connection |
| 37 | 2 | Jixie Zhang | 4301-4302 pedestal, beam off, HV on, using hallc_fadc config (without GEM), pulse trigger |
| 38 | 4303-4304 trash |
||
| 39 | 4305 pedestal, beam on, HV off, pulse trigger |
||
| 40 | 4306 pedestal, beam on, only SC_C HV is on (ch B.06), pulse trigger |
||
| 41 | 5 | Jixie Zhang | 4307 trash, ssp error, TS4, PS4=10, Beam on, all HVs on,threshold 200mV |
| 42 | 2 | Jixie Zhang | |
| 43 | |||
| 44 | 5uA beam on target hole |
||
| 45 | |||
| 46 | pulse trigger for 300k events, for pedestal with beam on and HV on |
||
| 47 | 5 | Jixie Zhang | 4308 pedestal, Beam on, all HVs on, pulse trigger, rate=3.7kHz |
| 48 | 4309 pedestal, Beam on, all HVs on, pulse trigger, rate=3.7kHz |
||
| 49 | 4310 pedestal, Beam on, all HVs on, pulse trigger, rate=3.7kHz |
||
| 50 | 1 | Jixie Zhang | |
| 51 | no pulse trigger |
||
| 52 | 2 | Jixie Zhang | 4311-4314 trash |
| 53 | |||
| 54 | 1 | Jixie Zhang | |
| 55 | 2 | Jixie Zhang | 20230221 |
| 56 | 1 | Jixie Zhang | ===Run plan=== |
| 57 | 5 | Jixie Zhang | start with TS4, PS=10, determine the prescale factor by scan the threshold, |
| 58 | 2 | Jixie Zhang | then take data for each trigger bit to determine peak time |
| 59 | 1 | Jixie Zhang | TS4, Threshold=40mV, set proper PS4 such that rate=3kHz to take one run |
| 60 | 5 | Jixie Zhang | TS3, Threshold 50mV & 50mV, determine PS3 then take one run |
| 61 | TS2, Threshold 50mV & 50mV, determine PS2 then take one run |
||
| 62 | 2 | Jixie Zhang | TS1, Threshold 50mV & 50mV, determine PS1 then take one run |
| 63 | 5 | Jixie Zhang | Set proper PS1,PS2,PS3 and PS4, take 2 runs with all triggers |
| 64 | 2 | Jixie Zhang | ============== |
| 65 | |||
| 66 | ==5uA beam on C12 target hole, all HVs on |
||
| 67 | 5 | Jixie Zhang | 4315 TS4, PS4=10, scan threshold from 300mV to 20mV to check rate to determine threshold |
| 68 | 1 | Jixie Zhang | 4316 TS4, PS4=0, threshold 20mV(ShowerSum), rate=2.4kHz |
| 69 | 2 | Jixie Zhang | --------------------------------------------------- |
| 70 | 5 | Jixie Zhang | Increase HVs for SC_D,SC_A,SC_B by 50V to match what has been used in 7deg: (1150,1550,1650) |
| 71 | 2 | Jixie Zhang | --------------------------------------------------- |
| 72 | |||
| 73 | ==5uA beam on C12 target hole, all HVs on |
||
| 74 | 5 | Jixie Zhang | 4317 TS4, PS4=0, threshold: 20mV(ShowerSum), rate=2.4kHz, |
| 75 | 1 | Jixie Zhang | 4318 TS3, PS3=0, threshold: 36mV(SC_A) & 36mV(SC_D), rate=3.7kHz, daq saturated |
| 76 | 2 | Jixie Zhang | 4319 TS3, PS3=0, threshold: 50mV(SC_A) & 50mV(SC_D), rate=3.7kHz, daq saturated |
| 77 | 1 | Jixie Zhang | |
| 78 | 2 | Jixie Zhang | ==10uA beam on LH2 target |
| 79 | We found that SC_B is saturated easily at 1650V HV, so we decreased it to 1550V, this will affect TS2 |
||
| 80 | TS4 threshold: 20mV(ShowerSum), (rate=40kHz without PS) |
||
| 81 | |||
| 82 | 4320 TS3, PS3=5, threshold: 50mV(SC_A) & 50mV(SC_D), rate=3.7kHz, daq saturated (600kHz without PS) |
||
| 83 | 1 | Jixie Zhang | 4321 TS3, PS3=7, threshold: 50mV(SC_A) & 50mV(SC_D), rate=3.7kHz, daq saturated |
| 84 | 5 | Jixie Zhang | 4322 TS3, PS3=10, threshold: 50mV(SC_A) & 50mV(SC_D), rate=0.6kHz, |
| 85 | 4323 TS3, PS3=8, threshold: 50mV(SC_A) & 50mV(SC_D), rate=2.4kHz, |
||
| 86 | 4324 TS2, PS2=4, threshold: 50mV(SC_B) & 50mV(SC_D), rate=1.1kHz, |
||
| 87 | 2 | Jixie Zhang | 4325 TS2, PS2=3, threshold: 50mV(SC_B) & 50mV(SC_D), rate=2.0kHz, (26kHz without PS) |
| 88 | 4326 TS2, PS2=3, threshold: 36mV(SC_B) & 36mV(SC_D), rate=3.7kHz, daq saturated (40kHz without PS) |
||
| 89 | 4327 TS1, PS1=2, threshold: 35mV(CerSum, 2pe) & 20mV(ShowerSum), rate=3.7kHz, daq saturated (14kHz without PS @ 15uA beam current), |
||
| 90 | 4328 TS1, PS1=3, threshold: 35mV(CerSum, 2pe) & 20mV(ShowerSum), rate=0.4kHz @ 5uA beam current |
||
| 91 | no beam ...... to be continued |
||
| 92 | |||
| 93 | ======================================================================== |
||
| 94 | 5 | Jixie Zhang | Threshold Guidence: |
| 95 | 2 | Jixie Zhang | 1) ShowerSum: MIP is at ~470 ADC, which is 40MeV. Shower sampling is 20%. Therefore 1 GeV electron will have ~2350 ADC in integral. |
| 96 | The averaged Integral/Height for ShowerSum is 8.2, Note that 1ADC=0.488mV, therefore the threshold corresponding to 2350 ADC |
||
| 97 | 5 | Jixie Zhang | integral is 0.488*2350/8.2 = 140 mV. |
| 98 | 2 | Jixie Zhang | |
| 99 | Sugggested threshold for ShowerSum: |
||
| 100 | To cut off 1 GeV electron: 140mV |
||
| 101 | To cut off 500MeV electron: 70mV |
||
| 102 | To keep low energy photon background: 10mV |
||
| 103 | |||
| 104 | 5 | Jixie Zhang | 140mV can only cut off 50% 1 GeV electrons. |
| 105 | 2 | Jixie Zhang | To Cut of 99.7% of 1 GeV electrons (3-sigma), we need to apply threshold: 0.488*2350/(8.23-3*0.7345) = 190mV |
| 106 | To include 99.7% of 1GeV electrons: 0.488*2350/(8.23+3*0.7345) = 110mV |
||
| 107 | 1 | Jixie Zhang | To include 95% of 1GeV electrons: 0.488*2350/(8.23+2*0.7345) = 118mV ---> rounded to 120mV |
| 108 | |||
| 109 | 2) TS2: Half MIP: SC_B=45mV, SC_D=35mV (By Jx: SC_B(1650V)=57mV, SC_D(1150V)=34mV) |
||
| 110 | 2 | Jixie Zhang | 3) TS3: Half MIP: SC_A=35mV, SC_D=35mV (By Jx: SC_A(1550V)=31mV, SC_D(1150V)=34mV) |
| 111 | |||
| 112 | ======================================================================== |
||
| 113 | 20230223 |
||
| 114 | ==40uA at gold target== |
||
| 115 | 1 | Jixie Zhang | threshold |
| 116 | 5 | Jixie Zhang | TS1: CerSum(35mV or 72adc, 2pe) & ShowerSum(70mV or 143adc, 500MeV electron); |
| 117 | TS2: SC_D(50mV or 410adc) & SC_B(50mV or 410adc); |
||
| 118 | or SC_D(36mV or 295adc) & SC_B(36mV or 295adc); |
||
| 119 | or SC_D(20mV or 164adc) & SC_B(20mV or 164adc); |
||
| 120 | 2 | Jixie Zhang | TS3: SC_D(50mV or 410adc) & SC_A(50mV or 410adc); |
| 121 | 1 | Jixie Zhang | TS4: ShowerSum(140mV or 287adc, 1GeV electron); |
| 122 | or (70mV or 143adc, 500MeV electron); |
||
| 123 | 2 | Jixie Zhang | or (20mV or 41adc, 70% MIP); |
| 124 | TS5: N/A. |
||
| 125 | TS6: CerA#,CerB#,CerC#,CerD#(15mV or 31 adc unit) for each Cherenkov individual input. |
||
| 126 | |||
| 127 | |||
| 128 | ==hallc_fadc config, no GEMs== |
||
| 129 | 4329 TS4, PS4=0, threshold: 20mV(ShowerSum), rate=3.7kHz @40uA, Shower detectors partly saturated, 170k events |
||
| 130 | 4330 TS4, PS4=5, threshold: 70mV(ShowerSum), rate=2.9kHz @40uA, 860k events |
||
| 131 | 4331 TS4, PS4=0, threshold: 140mV(ShowerSum), rate=3.1kHz @40uA, 1.6M events |
||
| 132 | 4332 TS1, PS1=0, threshold: CerSum(35mV, or 2pe) & ShowerSum(70mV or 500MeV electron), rate=5.0kHz @40uA, 1.1M events |
||
| 133 | 5 | Jixie Zhang | Cherenkov or Shower detectors are partly saturated. TS1 have maximum rate (9kHz) at 25uA. |
| 134 | 2 | Jixie Zhang | 4333 TS1, PS1=0, threshold: CerSum(35mV, or 2pe) & ShowerSum(70mV or 500MeV electron), rate=5.0kHz, 1.6M events |
| 135 | 5 | Jixie Zhang | Cherenkov or Shower detectors are partly saturated. TS1 have maximum rate (9kHz) at 25uA. |
| 136 | 1 | Jixie Zhang | 4334 trash, |
| 137 | 5 | Jixie Zhang | 4335 Low stat, TS4, PS4=10, threshold: 10mV(ShowerSum), rate=0Hz, Shower detector 100% saturated, |
| 138 | 2 | Jixie Zhang | changed to 20mV threshold at the end to check detector saturation. 14k events |
| 139 | 4336 TS4, PS4=10, threshold: 20mV(ShowerSum), rate=1.4kHz @40uA, Shower detector partly saturated . |
||
| 140 | TS4 have maximum rate (12.5kHz) at 25uA. 805k events |
||
| 141 | 1 | Jixie Zhang | 4337 TS2, PS2=10, threshold: 50mV(SC_D) & 50mV(SC_B), rate=5.0kHz @40uA, detectors not saturated. 1.1M events |
| 142 | 2 | Jixie Zhang | 4338 TS2, PS2=10, threshold: 36mV(SC_D) & 36mV(SC_B), rate=5.5kHz @40uA, detectors not saturated. 1.8M events |
| 143 | 4339 TS2, PS2=10, threshold: 20mV(SC_D) & 20mV(SC_B), rate=3.1kHz @40uA, detectors partly saturated. 947k events |
||
| 144 | 5 | Jixie Zhang | 4340 Low stat,TS3, PS3=12, threshold: 50mV(SC_D) & 50mV(SC_A), rate=0Hz @40uA, detectors 100% saturated. |
| 145 | adjust threshold to 50mV(SC_D) & 150mV(SC_A), rate=0Hz @40uA, detectors still 100% saturated. |
||
| 146 | 1 | Jixie Zhang | ====================================================================================================== |
| 147 | 2 | Jixie Zhang | 20230225 |
| 148 | |||
| 149 | 1 | Jixie Zhang | ==Plan== |
| 150 | 5 | Jixie Zhang | Adjust SC_B, preshower, LASPD HVs then take data for each trigger bit using the given thresholds |
| 151 | 2 | Jixie Zhang | ======== |
| 152 | 1 | Jixie Zhang | |
| 153 | 5 | Jixie Zhang | Increase LASPD HVs by 50V, SC_B go back to 1600V (was 1650), |
| 154 | 2 | Jixie Zhang | PreShower(L,R,T) from (1515,1800,1730) to (1600,1800,1700) |
| 155 | 5 | Jixie Zhang | Shower (L,R,T) from (850,1030,970) to (860,1030,960) |
| 156 | 1 | Jixie Zhang | |
| 157 | 2 | Jixie Zhang | --------------------------------------------------- |
| 158 | List of HVs: |
||
| 159 | 1 | Jixie Zhang | board1, 6kV, 8-ch: |
| 160 | 2 | Jixie Zhang | Name:_GEM00,__,__,_GEM01,_GEM10,_GEM11,__,_Cer_D |
| 161 | HV:_______0,_0,_0,_____0,_____0,_____0,_0,___950 |
||
| 162 | 1 | Jixie Zhang | |
| 163 | 2 | Jixie Zhang | |
| 164 | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
||
| 165 | 1 | Jixie Zhang | HV:___1150,_1550,_1600,_0,_____930,____1040,_1600,___________1600,___________1800,___________1700,_____________860,____________1030,_____________960,___950,___950,___950 |
| 166 | 2 | Jixie Zhang | |
| 167 | 1 | Jixie Zhang | --------------------------------------------------- |
| 168 | 10uA beam on LH2 target |
||
| 169 | 2 | Jixie Zhang | ==threshold== |
| 170 | 5 | Jixie Zhang | TS1: CerSum(35mV or 72adc, 2pe) & ShowerSum(70mV or 143adc, 500MeV electron); |
| 171 | TS2: SC_D(35mV or 295adc) & SC_B(35mV or 295adc); |
||
| 172 | 2 | Jixie Zhang | TS3: SC_D(35mV or 295adc) & SC_A(31mV or 410adc); |
| 173 | TS4: ShowerSum(15mV or 31adc, 50% MIP); |
||
| 174 | |||
| 175 | 1 | Jixie Zhang | 4341 trash, TS4, PS4=0, threshold: 120mV(ShowerSum), no beam 11 events |
| 176 | 2 | Jixie Zhang | 4342 trash, ssp time out |
| 177 | 5 | Jixie Zhang | 4343 TS4, PS4=0, threshold: 120mV(ShowerSum, keep 95% 1GeV electrons), first 300k is pulse trigger, rate=460Hz @6uA |
| 178 | 4344 TS4, PS4=0, threshold: 120mV(ShowerSum, keep 95% 1GeV electrons), rate=840Hz @10uA, 150k events |
||
| 179 | 4345 TS4, PS4=0, threshold: 70mV(ShowerSum 2.5MIP), rate=3.3kHz @10uA, 639k events, coda crashed at the end |
||
| 180 | 4346 TS2, PS2=5, threshold: 35mV(SC_D) & 35mV(SC_B), rate=3.7kHz @10uA, daq saturated, 750k events |
||
| 181 | 4347 TS2, PS2=7, threshold: 35mV(SC_D) & 35mV(SC_B), rate=1.6kHz @10uA, 469k events |
||
| 182 | 4348 TS2, PS2=6, threshold: 35mV(SC_D) & 35mV(SC_B), rate=3.3kHz @10uA, 753k events |
||
| 183 | 4349 TS3, PS3=8, threshold: 35mV(SC_D) & 31mV(SC_A), rate=3.6kHz @10uA, daq NOT saturated, 956k events |
||
| 184 | 4350 TS3, PS3=9, threshold: 35mV(SC_D) & 31mV(SC_A), rate=1.8kHz @10uA, 986k events |
||
| 185 | 4351 TS1, PS1=0, threshold: 35mV(CerSum, 2pe) & 30mV(ShowerSum), rate=2.9kHz @10uA, 2.8M events, coda crashed at the end |
||
| 186 | 1 | Jixie Zhang | 4352 TS4, PS4=4, threshold: 15mV(ShowerSum, Half MIP), rate=3.7kHz @10uA, daq saturated, 610k events |
| 187 | 2 | Jixie Zhang | 4353 trash, ssp error |
| 188 | 4354 trash, TS4, PS4=5, threshold: 15mV(ShowerSum, Half MIP), no beam |
||
| 189 | 5 | Jixie Zhang | 4355 pedestal, beam off HV on |
| 190 | 2 | Jixie Zhang | 4356 pedestal, beam off HV off |
| 191 | 4357 trash, |
||
| 192 | 5 | Jixie Zhang | 4358 TS4, PS4=5, threshold: 15mV(ShowerSum, Half MIP), PreShower(L,R,T) from (1600,1800,1700) to (1600,1810,1700), |
| 193 | 2 | Jixie Zhang | rate=2.4kHz @10uA,2M events |
| 194 | 4359 TS1,TS2,TS3,TS4, PS1=2,PS2=8,PS3=10,PS4=6, LH2 target |
||
| 195 | threshold: TS1=CerSum(35mV) & ShowerSum(30mV, MIP); TS2= SC_D(35mV) & SC_B(35mV); SC_D(35mV) & SC_A(31mV); |
||
| 196 | 5 | Jixie Zhang | TS4=15mV(ShowerSum, Half MIP), PreShower(L,R,T) = (1600,1810,1700), |
| 197 | 2 | Jixie Zhang | rate=3.6kHz @10uA, 1.4M events |
| 198 | 4360 TS1,TS2,TS3,TS4, PS1=2,PS2=8,PS3=10,PS4=6, LH2 target |
||
| 199 | threshold: TS1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); TS2= SC_D(35mV) & SC_B(35mV); SC_D(35mV) & SC_A(31mV); |
||
| 200 | 5 | Jixie Zhang | TS4=15mV(ShowerSum, Half MIP), PreShower(L,R,T) = (1600,1810,1700), |
| 201 | rate=3.0kHz @10uA, 34.6M events, beam current sometime go up to 20uA and 30uA |
||
| 202 | subrun 0-5: 10uA |
||
| 203 | 1 | Jixie Zhang | subrun 6: mixed with 10uA and 20uA |
| 204 | 2 | Jixie Zhang | subrun 7-13: 20uA |
| 205 | 1 | Jixie Zhang | subrun 14-30: 30uA |
| 206 | 2 | Jixie Zhang | subrun 31: mixed with 30uA and 10uA |
| 207 | 5 | Jixie Zhang | subrun 32-35: 10uA, |
| 208 | 2 | Jixie Zhang | subrun 36: mixed with 10uA and 20uA |
| 209 | subrun 37-48: 20uA |
||
| 210 | subrun 49: mixed with 20uA and 10uA |
||
| 211 | 5 | Jixie Zhang | subrun 50-54: 10uA |
| 212 | |||
| 213 | 2 | Jixie Zhang | 4361 trash, ssp error |
| 214 | 4362 TS1,TS2,TS3,TS4, PS1=2,PS2=8,PS3=10,PS4=6, LH2 and dummy target at the end |
||
| 215 | threshold: TS1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); TS2= SC_D(35mV) & SC_B(35mV); SC_D(35mV) & SC_A(31mV); |
||
| 216 | 5 | Jixie Zhang | TS4=15mV(ShowerSum, Half MIP), PreShower(L,R,T) = (1600,1810,1700), |
| 217 | rate=3.1kHz @10uA on LH2 target, 1.8M events. From 12:11 changed to dummy target, rate droped to 1.8kHz |
||
| 218 | 2 | Jixie Zhang | 4363 trash, ssp error |
| 219 | 1 | Jixie Zhang | 4364 TS1,TS2,TS3,TS4, PS1=1,PS2=7,PS3=9,PS4=5, dummy target |
| 220 | threshold: TS1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); TS2= SC_D(35mV) & SC_B(35mV); SC_D(35mV) & SC_A(31mV); |
||
| 221 | 5 | Jixie Zhang | TS4=15mV(ShowerSum, Half MIP), PreShower(L,R,T) = (1600,1810,1700), |
| 222 | 1 | Jixie Zhang | rate=3.5kHz @10uA on dummy target, 2.2M events |
| 223 | |||
| 224 | 5 | Jixie Zhang | 4365 TS4, PS4=7, threshold: 15mV(ShowerSum, Half MIP), rate=3.6kHz @ 15uA beam on LD2 target, |
| 225 | 1 | Jixie Zhang | PreShower(L,R,T) changed from (1600,1810,1700) to (1600,1820,1700), 306k events |
| 226 | 5 | Jixie Zhang | |
| 227 | 1 | Jixie Zhang | 4366 TS4, PS4=4, threshold: 120mV(ShowerSum, Keep 95% of 1GeV electron), rate=3.2kHz @ 40uA beam on LD2 target |
| 228 | PreShower(L,R,T) = (1600,1820,1700), coda crashed after collecting 1.2M events |
||
| 229 | 2 | Jixie Zhang | 4367 TS4, PS4=4, threshold: 120mV(ShowerSum, Keep 95% of 1GeV electron), rate=3.2kHz @ 40uA beam on LD2 target |
| 230 | PreShower(L,R,T) = (1600,1820,1700), 2.3M events |
||
| 231 | 4368 TS4, PS4=4, threshold: 120mV(ShowerSum, Keep 95% of 1GeV electron), rate=3.2kHz @ 40uA beam on LD2 target |
||
| 232 | PreShower(L,R,T) = (1600,1820,1700), 5.5M events |
||
| 233 | |||
| 234 | 5 | Jixie Zhang | 4369-4370 pedestal, beam off HV off |
| 235 | 2 | Jixie Zhang | 4371-4372 trash, ssp err |
| 236 | 4373-4374 pedestal, beam off HV on |
||
| 237 | |||
| 238 | 4375 trash or not useful, empty target, 1k events. |
||
| 239 | ======================================================================== |
||
| 240 | 20230301 |
||
| 241 | --------------------------------------- |
||
| 242 | 1 | Jixie Zhang | Work done on 20230301 |
| 243 | 2 | Jixie Zhang | |
| 244 | 5 | Jixie Zhang | 1. Signal cable for SC_C(253) and CerB3 (285) were swapped in the patch panel. They look similar to each other |
| 245 | since the labels are faded out. After swapping them back both look good. CerB3 is now connected to FADC Slot7 ch07, |
||
| 246 | 2 | Jixie Zhang | but it is not included in CerSum. |
| 247 | 5 | Jixie Zhang | 2. Change all Cherenkov FADC range from 2.0V to 1.0V, including the CerSum at FADC slot8 ch03. By doing this, 1ADC=0.244mV, |
| 248 | Cherenkov signal height will be doubled therefore in the new data it will not be affected as much as before by the peak |
||
| 249 | 2 | Jixie Zhang | finding threshold cut (default 20 adc). |
| 250 | 5 | Jixie Zhang | 3. Change PreShSum (Slot8 ch13) range from 2.0V to 0.5V so it matches to PreShower individual detectors. By doing this, |
| 251 | 2 | Jixie Zhang | software sum should match to the hardware sum. |
| 252 | 4. Change latency of each trigger bit. Align TS1, TS2 and TS3 to TS4 within 4ns. All inputs after the vmeDSC are aligned within 4ns. |
||
| 253 | ----------------------------------------- |
||
| 254 | |||
| 255 | --------------------------------------------------- |
||
| 256 | List of HVs: |
||
| 257 | board1, 6kV, 8-ch: |
||
| 258 | Name:_GEM00,__,__,_GEM01,_GEM10,_GEM11,__,_Cer_D |
||
| 259 | HV:_______0,_0,_0,_____0,_____0,_____0,_0,___950 |
||
| 260 | |||
| 261 | |||
| 262 | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
||
| 263 | HV:___1150,_1550,_1600,_0,_____930,____1040,_1600,___________1600,___________1820,___________1700,_____________860,____________1030,_____________960,___950,___950,___950 |
||
| 264 | |||
| 265 | GEM1 HV can not turn on! |
||
| 266 | Using hallc_fadc config, no gem because GEM1 HV can not turn on |
||
| 267 | 5 | Jixie Zhang | 4376-4378 pedestal, beam off HV off, SC_C, SC_D, CerC1 have lose connection |
| 268 | 4379-4380 pedestal, beam off HV on, SC_C, SC_D, CerC1 have lose connection |
||
| 269 | 2 | Jixie Zhang | |
| 270 | 5 | Jixie Zhang | 18:45 escorted access to fix SC_C, SC_D, CerC1 cable connection problem. |
| 271 | 2 | Jixie Zhang | |
| 272 | 4381 pedestal, beam off HV on |
||
| 273 | 5 | Jixie Zhang | 4382 pedestal, beam off HV off |
| 274 | 2 | Jixie Zhang | 4383 pedestal, beam off HV on |
| 275 | |||
| 276 | 5 | Jixie Zhang | 50uA on LD2 target. |
| 277 | 2 | Jixie Zhang | Expected rate and threshold |
| 278 | TS1: CerSum(35mV, 2pe) & ShowerSum(70mV keep 50% 500MeV electrons): rate = 300kHz |
||
| 279 | TS2: SC_D(35mV) & SC_B(35mV); rate3 = 5.2MHz |
||
| 280 | TS3: SC_D(35mV) & SC_A(31mV); totally saturated |
||
| 281 | TS4: ShowerSum(120mV, keep 95% 1GeV electrons): rate = 100kHz |
||
| 282 | or (70mV, keep50% 500MeV electron): rate = 400kHz |
||
| 283 | or (15mV, half MIP): rate = 12MHz |
||
| 284 | |||
| 285 | 4384 TS4, PS4=4, Threshold: 120mV (ShowerSum,keep 95% of 1 GeV electron), NO GEM, 1.9M events, |
||
| 286 | rate=6.5kHz @ 50uA |
||
| 287 | == set FADC250_TET_IGNORE_MASK to ZERO for both FADC boards, threshold 20ADC== |
||
| 288 | 1 | Jixie Zhang | 4385 TS4, PS4=2, Threshold: 120mV (ShowerSum), NO GEM, rate=12.5kHz @ 50uA, daq saturated, 9.8M events |
| 289 | 5 | Jixie Zhang | 4386 TS4, PS4=10, Threshold: 15mV (ShowerSum, half MIP), NO GEM, rate=11.9kHz @ 50uA, |
| 290 | 2 | Jixie Zhang | Showers are partly saturated, 4.0M events |
| 291 | 5 | Jixie Zhang | 4387 TS4, PS4=9, Threshold: 15mV (ShowerSum, half MIP), rate=12.5kHz @ 50uA, |
| 292 | 2 | Jixie Zhang | Showers are partly saturated, daq also saturated, 5.0M events |
| 293 | 5 | Jixie Zhang | 4388 TS1, PS1=5, Threshold: CerSum(35mV, 2pe) & ShowerSum(70mV keep 50% 500MeV electrons), |
| 294 | 2 | Jixie Zhang | rate=10.0kHz @ 50uA, Cherenkov is partly saturated, daq also saturated, 2.3M events |
| 295 | 5 | Jixie Zhang | 4389 TS2, PS2=8, Threshold: SC_D(35mV) & SC_B(35mV), |
| 296 | 2 | Jixie Zhang | rate=12.5kHz @ 50uA, SC_D is partly saturated, daq also saturated, 5.5M events |
| 297 | 5 | Jixie Zhang | 4390 TS2, PS2=9, Threshold: SC_D(35mV) & SC_B(35mV), |
| 298 | 2 | Jixie Zhang | rate=10.3kHz @ 50uA, SC_D is partly saturated, daq also saturated, 484k events |
| 299 | 5 | Jixie Zhang | 4391 TS3, PS3=12, Threshold: SC_D(35mV) & SC_A(31mV), |
| 300 | 2 | Jixie Zhang | rate=400Hz @ 20uA, SC_A is 100% saturated when beam current larger than 20 uA, 10k events |
| 301 | 5 | Jixie Zhang | 4392 TS3, PS3=0, Threshold: SC_D(35mV) & SC_A(31mV), |
| 302 | 2 | Jixie Zhang | rate=400Hz @ 20uA, SC_A is 100% saturated when beam current larger than 20 uA, 570k events |
| 303 | |||
| 304 | 5 | Jixie Zhang | 4393 TS6, PS6=0, Threshold: 20ADC (5mV), 2 out of 15 individual Cer inputs, |
| 305 | 1 | Jixie Zhang | rate=1.4kHz @ 60uA, Cherenkov starts saturated at ~10 uA, 1.8M events |
| 306 | 5 | Jixie Zhang | 4394 TS6, PS6=0, Threshold: 20ADC (5mV), 2 out of 15 individual Cer inputs, |
| 307 | 1 | Jixie Zhang | rate=10kHz @ 8uA, Cherenkov starts saturated at ~10 uA, 307k events |
| 308 | 2 | Jixie Zhang | |
| 309 | ======================================================================== |
||
| 310 | 20230303 |
||
| 311 | |||
| 312 | ==HV scan for SC_A,SC_B,SC_C== |
||
| 313 | |||
| 314 | 4395 pedestal, beam off, HV off |
||
| 315 | 4396 pedestal, beam off, HV on, SC_B=-1600V, SC_C=-1600V |
||
| 316 | 4397 pedestal, beam off, HV on, SC_B=-1580V, SC_C=-1580V |
||
| 317 | 4398 pedestal, beam off, HV on, SC_B=-1590V, SC_C=-1590V |
||
| 318 | 1 | Jixie Zhang | 4399 pedestal, beam off, HV on, SC_B=-1570V, SC_C=-1570V |
| 319 | 2 | Jixie Zhang | 4400 pedestal, beam off, HV on, SC_B=-1600V, SC_C=-1600V |
| 320 | |||
| 321 | 5 | Jixie Zhang | 4401 HV scan (SC_A,SC_B,SC_C) = (1500, 1550, 1550) |
| 322 | 2 | Jixie Zhang | 4402 HV scan (SC_A,SC_B,SC_C) = (1510, 1560, 1560) |
| 323 | 4403 HV scan (SC_A,SC_B,SC_C) = (1520, 1570, 1570) |
||
| 324 | 4404 HV scan (SC_A,SC_B,SC_C) = (1530, 1580, 1580) |
||
| 325 | 4405 HV scan (SC_A,SC_B,SC_C) = (1540, 1590, 1590) |
||
| 326 | 4407 HV scan (SC_A,SC_B,SC_C) = (1510, 1600, 1570) |
||
| 327 | |||
| 328 | pedestal run result |
||
| 329 | run# ch7.00 ch7.01 ch7.02 ch7.03 ch7.04 ch7.05 ch7.06 ch7.07 ch7.08 ch7.09 ch7.10 ch7.11 ch7.12 ch7.13 ch7.14 ch7.15 ch8.00 ch8.01 ch8.02 ch8.03 ch8.04 ch8.05 ch8.06 ch8.07 ch8.08 ch8.09 ch8.10 ch8.11 ch8.12 ch8.13 ch8.14 ch8.15 |
||
| 330 | 4395 108.9 106.1 106.2 108.4 104.7 107.5 110.0 105.1 114.1 107.3 111.4 107.8 113.7 109.0 104.2 106.7 109.6 113.1 129.5 122.8 103.5 103.7 102.3 106.6 105.9 100.0 99.8 101.8 103.6 112.9 112.4 109.0 |
||
| 331 | 4396 108.8 106.1 106.1 108.3 104.7 107.4 109.9 105.3 114.2 107.3 111.4 107.7 113.8 109.2 104.3 106.9 110.1 120.8 149.8 123.0 103.5 103.8 229.4 106.4 105.8 101.9 99.9 102.0 103.8 113.0 112.3 109.0 |
||
| 332 | 4397 108.9 106.4 106.0 108.4 104.7 107.7 110.1 105.3 114.2 107.5 111.5 107.9 113.6 109.2 104.3 106.9 110.2 120.9 146.3 123.5 103.7 103.9 221.3 106.4 106.0 101.9 100.2 102.1 103.8 112.9 112.5 109.2 |
||
| 333 | 4398 108.8 106.2 106.0 108.3 104.7 107.6 109.7 105.3 114.3 107.4 111.5 108.0 113.6 109.3 104.3 107.0 110.4 120.4 146.4 123.2 103.6 103.7 218.4 106.4 105.8 101.7 100.0 101.7 103.7 112.9 112.6 109.2 |
||
| 334 | 4399 108.8 106.1 106.0 108.4 104.6 107.5 110.0 105.3 114.4 107.4 111.6 107.8 113.6 109.1 104.5 106.9 110.4 120.2 143.7 123.4 103.6 103.7 209.9 106.4 105.8 101.7 100.0 101.9 104.0 113.0 112.8 109.2 |
||
| 335 | 4400 108.8 106.1 106.0 108.4 104.6 107.6 110.1 105.1 114.2 107.2 111.6 107.9 113.6 109.0 104.4 106.9 110.2 120.2 148.0 122.9 103.5 103.8 222.2 106.5 105.8 101.7 100.0 101.8 103.9 113.0 112.8 109.2 |
||
| 336 | 4401 108.7 105.6 106.3 108.5 104.9 108.3 109.9 105.3 116.4 107.1 111.5 107.6 113.6 109.1 104.7 107.2 -68.8 342.6 117.8 -43.1 145.6 131.6 246.6 108.2 107.6 105.1 101.3 103.3 104.7 118.1 116.5 108.8 |
||
| 337 | 4419 108.7 105.1 105.1 108.2 104.6 107.5 109.5 104.7 113.6 106.9 111.2 107.5 113.1 109.3 104.6 106.7 108.7 118.5 147.2 121.6 103.0 103.6 206.0 106.8 105.9 101.7 100.6 102.4 103.4 113.1 112.0 108.9 |
||
| 338 | |||
| 339 | -------------------------------------------------------------- |
||
| 340 | 70uA cw beam on LD2 target |
||
| 341 | |||
| 342 | 4401 TS1 and TS4: PS1=3,PS4=1, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
||
| 343 | 1 | Jixie Zhang | HV scan (SC_A,SC_B,SC_C) = (1500, 1550, 1550), rate=12.5kHz, daq saturated, 40M events |
| 344 | 2 | Jixie Zhang | 4402 TS1 and TS4: PS1=3,PS4=1, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
| 345 | HV scan (SC_A,SC_B,SC_C) = (1510, 1560, 1560), rate=12.5kHz, daq saturated, 17.8M events |
||
| 346 | 4403 TS1 and TS4: PS1=5,PS4=3, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
||
| 347 | HV scan (SC_A,SC_B,SC_C) = (1520, 1570, 1570), rate=12.5kHz, daq saturated, 2.2M events |
||
| 348 | 4404 TS1 and TS4: PS1=6,PS4=4, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
||
| 349 | HV scan (SC_A,SC_B,SC_C) = (1530, 1580, 1580), rate=10.5kHz, 7.6M events |
||
| 350 | 4405 TS1 and TS4: PS1=6,PS4=4, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
||
| 351 | 1 | Jixie Zhang | HV scan (SC_A,SC_B,SC_C) = (1540, 1590, 1590), rate=10.1kHz, 2.0M events |
| 352 | 2 | Jixie Zhang | 4406 TS1 and TS4: PS1=6,PS4=4, Threshold1: CerSum(35mV) & ShowerSum(70mV), Threshold4: ShowerSum(120mV), No GEM, |
| 353 | HV scan (SC_A,SC_B,SC_C) = (1540, 1590, 1590), rate=10.1kHz, 23.6M events |
||
| 354 | |||
| 355 | pedestal for HV scan runs |
||
| 356 | run# ch7.00 ch7.01 ch7.02 ch7.03 ch7.04 ch7.05 ch7.06 ch7.07 ch7.08 ch7.09 ch7.10 ch7.11 ch7.12 ch7.13 ch7.14 ch7.15 ch8.00 ch8.01 ch8.02 ch8.03 ch8.04 ch8.05 ch8.06 ch8.07 ch8.08 ch8.09 ch8.10 ch8.11 ch8.12 ch8.13 ch8.14 ch8.15 |
||
| 357 | 4400 108.8 106.1 106.0 108.4 104.6 107.6 110.1 105.1 114.2 107.2 111.6 107.9 113.6 109.0 104.4 106.9 110.2 120.2 148.0 122.9 103.5 103.8 222.2 106.5 105.8 101.7 100.0 101.8 103.9 113.0 112.8 109.2 |
||
| 358 | 4401 108.7 105.6 106.3 108.5 104.9 108.3 109.9 105.3 116.4 107.1 111.5 107.6 113.6 109.1 104.7 107.2 -68.8 342.6 117.8 -43.1 145.6 131.6 246.6 108.2 107.6 105.1 101.3 103.3 104.7 118.1 116.5 108.8 |
||
| 359 | 4402 109.1 105.7 105.9 108.1 104.5 107.7 109.3 105.0 114.0 107.0 111.0 107.4 113.6 108.7 104.0 107.1 96.4 127.7 143.8 122.5 109.8 111.0 209.3 107.1 106.4 102.1 100.7 102.6 103.7 114.6 112.7 109.0 |
||
| 360 | 4403 110.2 107.3 106.9 108.8 106.1 109.2 111.6 106.1 123.1 108.0 112.7 109.3 114.2 109.9 104.8 107.8 397.8 0.0 159.3 220.1 195.4 204.3 560.5 114.6 94.7 111.0 116.6 108.8 121.9 123.6 151.0 109.0 |
||
| 361 | 4404 110.1 107.1 107.7 109.1 105.9 109.2 111.2 106.2 123.0 108.3 112.5 109.2 114.7 110.1 104.9 108.3 391.0 0.0 263.0 239.3 194.9 204.3 589.1 113.9 95.9 110.8 116.2 109.0 122.1 128.2 151.0 109.2 |
||
| 362 | 4405 109.9 107.4 107.5 109.2 105.9 109.2 111.3 106.4 122.5 108.6 112.4 109.5 115.1 110.6 106.2 108.5 325.9 555.9 119.5 185.3 194.3 202.2 523.9 112.6 110.9 107.4 112.6 107.7 115.7 67.0 158.9 109.5 |
||
| 363 | 4406 109.9 107.6 107.4 109.3 106.1 109.1 111.3 106.5 121.0 108.7 112.4 109.5 115.1 110.4 106.3 108.8 287.6 687.8 68.9 145.7 193.5 192.7 473.0 112.7 114.0 109.7 111.3 106.4 112.4 94.9 131.0 109.6 |
||
| 364 | 4407 109.6 106.9 106.5 109.5 105.5 108.5 110.9 105.9 120.1 109.0 112.4 108.7 114.7 110.3 105.9 108.0 273.2 573.0 144.4 136.6 191.0 191.5 408.5 111.4 111.9 110.1 107.4 105.7 109.9 120.5 122.3 109.3 |
||
| 365 | 4408 109.2 106.4 106.8 108.6 105.2 108.0 110.9 105.2 118.2 108.1 111.8 108.7 114.7 110.2 105.3 107.7 194.4 419.4 9.5 -12.0 157.4 110.0 212.3 109.1 108.4 105.2 103.1 104.1 106.4 118.7 118.4 109.2 |
||
| 366 | 4419 108.7 105.1 105.1 108.2 104.6 107.5 109.5 104.7 113.6 106.9 111.2 107.5 113.1 109.3 104.6 106.7 108.7 118.5 147.2 121.6 103.0 103.6 206.0 106.8 105.9 101.7 100.6 102.4 103.4 113.1 112.0 108.9 |
||
| 367 | 1 | Jixie Zhang | |
| 368 | 5 | Jixie Zhang | Conclusion: |
| 369 | 2 | Jixie Zhang | HVs for (SC_D,SC_A,SC_B,SC_C) are (1150,1510,1600,1570). |
| 370 | Change to the above HVs. |
||
| 371 | |||
| 372 | --------------------------------------------------- |
||
| 373 | List of HVs: |
||
| 374 | 1 | Jixie Zhang | board1, 6kV, 8-ch: |
| 375 | 2 | Jixie Zhang | Name:_GEM00,__,__,_GEM01,_GEM10,_GEM11,__,_Cer_D |
| 376 | 1 | Jixie Zhang | HV:_______0,_0,_0,_____0,_____0,_____0,_0,___950 |
| 377 | |||
| 378 | |||
| 379 | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
||
| 380 | HV:___1150,_1510,_1600,_0,_____930,____1040,_1570,___________1600,___________1820,___________1700,_____________860,____________1030,_____________960,___950,___950,___950 |
||
| 381 | 2 | Jixie Zhang | |
| 382 | 1 | Jixie Zhang | --------------------------------------------------- |
| 383 | 2 | Jixie Zhang | |
| 384 | 1 | Jixie Zhang | |
| 385 | 4407 TS2: PS2=10, Threshold: SC_D(35mV) & SC_B(35mV), rate=7.5kHz @ 70uA, SC_D is partly saturated, 1.5M events |
||
| 386 | 5 | Jixie Zhang | 4408 TS3, PS3=12, Threshold: SC_D(35mV) & SC_A(31mV), rate=0Hz @ 60uA, SC_A is 100% saturated |
| 387 | 4409 TS1,TS2,TS4, PS1=8,PS2=10,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 388 | threshold2= SC_D(35mV) & SC_B(35mV); threshold4=15mV(ShowerSum, Half MIP), |
||
| 389 | rate=10.1kHz @70uA on LD2 target, 17.3M events. |
||
| 390 | 1 | Jixie Zhang | |
| 391 | 5 | Jixie Zhang | 4410 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
| 392 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 393 | rate=12.5kHz at 10uA (daq saturated by TS3 in low current), |
||
| 394 | rate=10.1kHz @70uA (TS3 will not take trigger due to SC_A is saturated when beam current >20uA), 6.2M events. |
||
| 395 | 1 | Jixie Zhang | |
| 396 | 5 | Jixie Zhang | 4411 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
| 397 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 398 | 2 | Jixie Zhang | Turned on EPICS script. 75M events. |
| 399 | |||
| 400 | 5 | Jixie Zhang | 4412 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
| 401 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 402 | Turned on EPICS script. 10M events. |
||
| 403 | |||
| 404 | 2 | Jixie Zhang | 4413 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
| 405 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 406 | Turned on EPICS script. 3.7M events. Ended run on trip (Run time: 03/04/23 13:16:10 - 13:22:31) |
||
| 407 | |||
| 408 | 4414 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 409 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 410 | Turned on EPICS script. 6.8M events. |
||
| 411 | Started Run afeter Beam Trip (no beam first 10 seconds) |
||
| 412 | Ended run on trip (Run time: 03/04/23 13:29:42 - 13:41:07) |
||
| 413 | 5 | Jixie Zhang | |
| 414 | 2 | Jixie Zhang | 4415 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
| 415 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 416 | 1 | Jixie Zhang | Turned on EPICS script. 3.8M events. |
| 417 | Started Run afeter Beam Trip (no beam first 2-3 seconds) |
||
| 418 | Ended run on trip (Run time: 03/04/23 13:41:38 - 13:48:03) |
||
| 419 | 2 | Jixie Zhang | |
| 420 | 4416 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 421 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 422 | Turned on EPICS script. 13.1M events. |
||
| 423 | |||
| 424 | 4417 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 425 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 426 | Turned on EPICS script. 8.8M events. |
||
| 427 | 1 | Jixie Zhang | |
| 428 | 4418 trash, no beam, HV on. Zero suppression is still on, basically no events |
||
| 429 | 4419 pedestal, no beam, HV on. Zero suppression is off. 100k events. |
||
| 430 | 2 | Jixie Zhang | 4420 trash |
| 431 | 4421 pedestal, no beam, HV on. GEM2,GEM3,GEM4 are on. Zero suppression is off. 100k events. |
||
| 432 | 4422 pedestal, no beam, HV on. GEM2,GEM3,GEM4 are on. Zero suppression is off. 100k events. |
||
| 433 | 1 | Jixie Zhang | |
| 434 | 2 | Jixie Zhang | |
| 435 | 1 | Jixie Zhang | ==use hallc_fadc_ssp config with EPICS, GEMs are on without GEM1== |
| 436 | 2 | Jixie Zhang | 4423 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
| 437 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 438 | rate=3.7kHz @ 60uA, daq saturated, 660k events, Zero suppression is off |
||
| 439 | 5 | Jixie Zhang | |
| 440 | 2 | Jixie Zhang | 4424 TS1,TS2,TS3,TS4, PS1=9,PS2=11,PS3=13,PS4=13, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
| 441 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 442 | rate=3.7kHz @ 60uA, daq saturated, 10M events, Zero suppression is off |
||
| 443 | |||
| 444 | == Zero suppression is off, use hallc_fadc config, no GEM== |
||
| 445 | 4425 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 446 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 447 | Turned on EPICS script. daq rate=10.3kHz @60uA, 2.8M events. |
||
| 448 | 5 | Jixie Zhang | |
| 449 | 2 | Jixie Zhang | == Zero suppression is on== |
| 450 | 4426 TS1,TS2,TS3,TS4, PS1=8,PS2=10,PS3=1,PS4=12, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 451 | 1 | Jixie Zhang | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
| 452 | 2 | Jixie Zhang | Turned on EPICS script. daq rate=10.3kHz @60uA, 44M events. |
| 453 | |||
| 454 | 4427 TS2, PS2=9, Threshold: SC_D(35mV) & SC_B(35mV), rate=12.7kHz @ 60uA, daq saturated, 533k events |
||
| 455 | 4428 TS2, PS2=10, Threshold: SC_D(35mV) & SC_B(35mV), rate=6.8kHz @ 60uA, 26.5M events |
||
| 456 | 4429 TS4, PS4=11, Threshold: ShowerSum(15mV, half MIP), rate=5.5kHz @ 60uA, 722k events |
||
| 457 | 4430 TS4, PS4=10, Threshold: ShowerSum(15mV, half MIP), rate=10.5kHz @ 60uA, 80M events |
||
| 458 | |||
| 459 | |||
| 460 | |||
| 461 | ==use hallc_fadc_ssp config with EPICS, GEMs are on without GEM1== |
||
| 462 | The following runs will be all trigger bits. |
||
| 463 | TS1,TS2,TS3,TS4, PS1=10,PS2=13,PS3=1,PS4=14, threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); |
||
| 464 | threshold2= SC_D(35mV) & SC_B(35mV); threshold3: SC_D(35mV) & SC_A(31mV),threshold4=15mV(ShowerSum, Half MIP), |
||
| 465 | 5 | Jixie Zhang | Turned on EPICS script. |
| 466 | 2 | Jixie Zhang | |
| 467 | 4431 TS1,TS2,TS3,TS4, PS1=10,PS2=13,PS3=1,PS4=14, Zero suppression is on. daq rate=1.7kHz @60uA, 404k events. |
||
| 468 | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3750,3750,3750) |
||
| 469 | |||
| 470 | 1 | Jixie Zhang | == Zero suppression is off, GEMs are on without GEM1== |
| 471 | 4432 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13. daq rate=3.4kHz @60uA, >40M events. vmecrate crashed at ~6:55 AM March 5th, 2023 |
||
| 472 | 2 | Jixie Zhang | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3750,3750,3750) |
| 473 | 5 | Jixie Zhang | |
| 474 | detector start saturated after one night of data taking, need to find out when and which one |
||
| 475 | 2 | Jixie Zhang | ==reboot solid vme crate== |
| 476 | |||
| 477 | 5 | Jixie Zhang | 4433 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13, daq rate=1.4kHz @60uA, detectors are partly saturated. 1.1M events |
| 478 | 2 | Jixie Zhang | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3770,3770,3770) |
| 479 | 5 | Jixie Zhang | |
| 480 | 4434 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13, daq rate=1.4kHz @60uA, detectors are partly saturated. 1.6M events |
||
| 481 | 2 | Jixie Zhang | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3790,3790,3790) |
| 482 | 5 | Jixie Zhang | |
| 483 | 4435 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13, daq rate=1.4kHz @60uA, detectors are partly saturated. 1.2M events |
||
| 484 | 2 | Jixie Zhang | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), (CerB,CerC)=(950,950) |
| 485 | 5 | Jixie Zhang | |
| 486 | 4436 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13, daq rate=1.4kHz @60uA, detectors are partly saturated. 1.9M events |
||
| 487 | 2 | Jixie Zhang | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3830,3830,3830), (CerB,CerC)=(970,970) |
| 488 | 5 | Jixie Zhang | |
| 489 | 4437 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=1,PS4=13, daq rate=1.4kHz @60uA, detectors are partly saturated. 1.0M events |
||
| 490 | 2 | Jixie Zhang | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3850,3850,3850), (CerB,CerC)=(990,990) |
| 491 | |||
| 492 | 5 | Jixie Zhang | ==addjust PS1 to PS4== |
| 493 | 4438 TS1,TS2,TS3,TS4, PS1=8,PS2=11,PS3=1,PS4=12, daq rate=2.7kHz @60uA, detectors are partly saturated. 1.0M events |
||
| 494 | 2 | Jixie Zhang | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3850,3850,3850), (CerB,CerC)=(990,990) |
| 495 | |||
| 496 | 5 | Jixie Zhang | ==addjust PS1== |
| 497 | 4439 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=12, daq rate=2.7kHz @60uA, detectors are partly saturated. 3.5M events |
||
| 498 | 2 | Jixie Zhang | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3850,3850,3850), (CerB,CerC)=(990,990) |
| 499 | 5 | Jixie Zhang | |
| 500 | 4440 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=12, daq rate=2.7kHz @60uA, detectors are partly saturated. 3.5M events |
||
| 501 | 1 | Jixie Zhang | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3870,3870,3870), (CerB,CerC)=(960,975) |
| 502 | 2 | Jixie Zhang | |
| 503 | 5 | Jixie Zhang | ==addjust PS4== |
| 504 | 4441 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=11, daq rate=3.1kHz @60uA, detectors are partly saturated. 770k events |
||
| 505 | 1 | Jixie Zhang | GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3870,3870,3870), (CerB,CerC)=(960,975) |
| 506 | 5 | Jixie Zhang | |
| 507 | 2 | Jixie Zhang | ==no beam pedestal=== |
| 508 | 5 | Jixie Zhang | 4442 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
| 509 | 1 | Jixie Zhang | (CerA,CerB,CerC,CerD)=(940,980,950,950) |
| 510 | 5 | Jixie Zhang | 4443 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
| 511 | 2 | Jixie Zhang | (CerA,CerB,CerC,CerD)=(950,960,975,950) |
| 512 | 5 | Jixie Zhang | 4444 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
| 513 | 2 | Jixie Zhang | (CerA,CerB,CerC,CerD)=(950,990,990,950) |
| 514 | 5 | Jixie Zhang | 4445 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
| 515 | 2 | Jixie Zhang | (CerA,CerB,CerC,CerD)=(950,970,970,950) |
| 516 | 4446-4448 trash |
||
| 517 | 5 | Jixie Zhang | 4449 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
| 518 | 2 | Jixie Zhang | (CerA,CerB,CerC,CerD)=(950,950,950,950) |
| 519 | 5 | Jixie Zhang | 4450 pedestal. beam off hVs on. GEM HVs(GEM1,GEM2,GEM3,GEM4) = (0,3810,3810,3810), |
| 520 | 2 | Jixie Zhang | (CerA,CerB,CerC,CerD)=(940,980,950,950) |
| 521 | 4451 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1510,1560,1560),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 522 | 4452 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1500,1550,1550),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 523 | 1 | Jixie Zhang | 4453 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1520,1570,1570),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
| 524 | 2 | Jixie Zhang | 4454 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1510,1600,1570),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
| 525 | 4455 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1510,1600,1570),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 526 | 4456 trash |
||
| 527 | 4457 pedestal. beam off hVs on. SC HVs(SC_A,SC_B,SC_C) = (1510,1600,1570),(CerA,CerB,CerC,CerD)=(940,980,950,950) |
||
| 528 | |||
| 529 | ==beam on, zero suppression is off== |
||
| 530 | --------------------------------------------------- |
||
| 531 | List of HVs: |
||
| 532 | board1, 6kV, 8-ch: |
||
| 533 | Name:_GEM00,__,__,_GEM01,_GEM10,_GEM11,__,_Cer_D |
||
| 534 | HV:_______0,_0,_0,_____0,_____0,_____0,_0,___950 |
||
| 535 | |||
| 536 | |||
| 537 | 1 | Jixie Zhang | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
| 538 | 2 | Jixie Zhang | HV:___1150,_1510,_1600,_0,_____930,____1040,_1570,___________1600,___________1820,___________1700,_____________860,____________1030,_____________960,___940,___980,___950 |
| 539 | |||
| 540 | |||
| 541 | 5 | Jixie Zhang | 4458 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=11, NO GEM, daq rate=12.8kHz @20uA, daq was saturated. 2.1M events |
| 542 | 4459 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=11, NO GEM, daq rate=12.8kHz @25uA, daq was saturated. 4.3M events |
||
| 543 | 4460 TS1,TS2,TS3,TS4, PS1=6,PS2=12,PS3=10,PS4=11, NO GEM, daq rate=2.5kHz @25uA, some detectors are saturated. 577k events |
||
| 544 | 4461 TS1,TS2,TS3,TS4, PS1=6,PS2=10,PS3=8,PS4=10, NO GEM, daq rate=5.4kHz @30uA, some detectors are saturated. 1.0M events |
||
| 545 | 4462 TS1,TS2,TS3,TS4, PS1=6,PS2=10,PS3=1,PS4=10, NO GEM, daq rate=8.3kHz @35uA, some detectors are saturated. |
||
| 546 | daq rate=12.7kHz @50uA, daq is saturated. 9.8M events |
||
| 547 | 4463 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=10, NO GEM, daq rate=12.7kHz @50uA, some detectors are saturated. |
||
| 548 | daq is saturated. 544k events |
||
| 549 | 4464 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=12, NO GEM, daq rate=3.5kHz @55uA, some detectors are saturated. 1.0M events |
||
| 550 | 2 | Jixie Zhang | ==disabled TS3== |
| 551 | 5 | Jixie Zhang | 4465 TS1,TS2,TS4, PS1=6,PS2=11,PS4=12, NO GEM, daq rate=3.5kHz @50uA, some detectors are saturated. 556k events |
| 552 | 4466 TS1,TS2,TS4, PS1=6,PS2=11,PS4=11, NO GEM, daq rate=4.8kHz @50uA, some detectors are saturated. 514k events |
||
| 553 | 4467 TS1,TS2,TS4, PS1=5,PS2=10,PS4=10, NO GEM, daq rate=9.7kHz @55uA, some detectors are saturated. 46M events |
||
| 554 | 2 | Jixie Zhang | rate=12.7kHz @ 49uA then detector partly saturated |
| 555 | 5 | Jixie Zhang | 4468 TS1,TS2,TS4, PS1=5,PS2=10,PS4=10, NO GEM, daq rate=7.5kHz @60uA, some detectors are saturated. 53M events |
| 556 | 2 | Jixie Zhang | |
| 557 | 1 | Jixie Zhang | ==turn on TS3, turn On GEM2,GEM3,GEM4== |
| 558 | 2 | Jixie Zhang | 4469 TS1,TS2,TS3,TS4, PS1=6,PS2=12,PS3=10,PS4=12, daq rate=1.7kHz @60uA, some detectors are saturated, 157k events |
| 559 | 4470 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=11, daq rate=3.4kHz @60uA, some detectors are saturated, 78M events |
||
| 560 | |||
| 561 | ====================================================================== |
||
| 562 | 20230306 work done in the hall |
||
| 563 | 1) Replaced GEM gas bottle |
||
| 564 | 2) Fixed HV VBound problem for GEM1 |
||
| 565 | 5 | Jixie Zhang | 3) Checked all cables in the DAQ end to avoid possible loose connection. Reconnect CerC0. Add CerB3 back into CerSum. |
| 566 | Addjusted the FIFO output offsets for CerA, CerB, CerC and CerD to zero, but keep the offset of CerSum as +10mV. |
||
| 567 | 2 | Jixie Zhang | In order to compesate this +10mV offset, its DAC value in FADC config file has been updated from 3330 to 3300. |
| 568 | 5 | Jixie Zhang | 4) Checked output offset for x10 amplifier that is used by SC_A, SC_B, SC_C and SC_D. It has +10mV~+14mV offsets. |
| 569 | However, the offset changes to ZERO if the input is a function generator. Is it a problem?) |
||
| 570 | 5) Change latency for TS1-TS4, all are aligned to SC_B. |
||
| 571 | 2 | Jixie Zhang | A) SC_A: add 8ns delay to SC_A before it goes into x10 amplifier |
| 572 | 5 | Jixie Zhang | B) SC_D: add 4ns deday by replacing the 3ns cable which is connecting the X10 amplifier to the FIFO with a 7ns cable |
| 573 | 2 | Jixie Zhang | C) SC_C: add 15ns delay to SC_C before it goes into x10 amplifier |
| 574 | D) Shower: delay Shower L|R|T by 4ns before they go into FIFO, replay the 2ns calbles which are connected FIFO to summing |
||
| 575 | module by the 8ns cables. Therefore ShowerSum get 10ns extra delay |
||
| 576 | E) CerSum: replace the 8ns delay cable (connected the CerSum to a FIFO) by a 15ns delay cable |
||
| 577 | 5 | Jixie Zhang | F) all cables, except LASPD_t and LASPD_b, go into Slot8 have 8ns delay |
| 578 | |||
| 579 | 2 | Jixie Zhang | 6) Reconnect CerC0 at the detector end, this fix CerC0 problem! |
| 580 | |||
| 581 | 5 | Jixie Zhang | 4471-4474 trash, debug detectors and daq |
| 582 | 1 | Jixie Zhang | 4475 pedestal, beam off, all HV on, CerSum DAC=3300, GEM HVs(3400,3750,3750,3750) |
| 583 | 2 | Jixie Zhang | 4476 pedestal, beam off, all HV on, CerSum DAC=3300, GEM HVs(3400,3750,3750,3750) |
| 584 | 4477 pedestal, beam off, all HV on, CerSum DAC=3300, GEM HVs(3470,3810,3810,3810) |
||
| 585 | 1 | Jixie Zhang | |
| 586 | 2 | Jixie Zhang | --------------------------------------------------- |
| 587 | 1 | Jixie Zhang | List of HVs: |
| 588 | 2 | Jixie Zhang | board1, 6kV, 8-ch: |
| 589 | Name:__GEM1,__,__,__GEM2,__GEM3,__GEM4,__,_Cer_D |
||
| 590 | 1 | Jixie Zhang | HV:____3470,_0,_0,__3810,__3810,__3810,_0,___950 |
| 591 | 2 | Jixie Zhang | |
| 592 | |||
| 593 | Name:_SC_D,_SC_A,_SC_B,_X,_LASPD_t,_LASPD_b,_SC_C,_PreSh_L(SDU#1),_PreSh_R(THU#1),_PreSh_T(SDU#2),_Shower_L(SDU#4),_Shower_R(THU#2),_Shower_T(SDU#5),__CerA,__CerB,__CerC |
||
| 594 | HV:___1150,_1510,_1600,_0,_____930,____1040,_1570,___________1600,___________1820,___________1700,_____________860,____________1030,_____________960,___940,___980,___950 |
||
| 595 | |||
| 596 | 1 | Jixie Zhang | --------------------------------------------------- |
| 597 | 3 | Jixie Zhang | threshold1=CerSum(35mV) & ShowerSum(70mV, 500 MeV electron); -->ShowerSum is set to 15mV wrongly fro runs 4478-4490<--- |
| 598 | 5 | Jixie Zhang | threshold2= SC_D(35mV) & SC_B(35mV); |
| 599 | 2 | Jixie Zhang | threshold3: SC_D(35mV) & SC_A(31mV), |
| 600 | threshold4=15mV(ShowerSum, Half MIP), |
||
| 601 | |||
| 602 | 4478 TS1,TS2,TS3,TS4, PS1=6,PS2=11,PS3=1,PS4=11, daq rate=3.7kHz @15uA, some detectors are saturated, 770k events |
||
| 603 | 4479 TS3,PS3=10, daq rate=1.7kHz @15uA, 270k events, CerC=950V |
||
| 604 | 4480 TS3,PS3=9, daq rate=170Hz @30uA, SC_A saturated, 132k events, CerC=930V |
||
| 605 | 4481 TS1,TS2,TS3,TS4, PS1=4,PS2=9,PS3=1,PS4=9, daq rate=3.7kHz @30uA, daq saturated, 870k events, CerC=930V |
||
| 606 | 4482 TS1,TS2,TS3,TS4, PS1=4,PS2=11,PS3=1,PS4=9, daq rate=3.7kHz @30uA, daq saturated, 970k events, CerC=910V |
||
| 607 | 1 | Jixie Zhang | 4483 TS1,TS2,TS3,TS4, PS1=8,PS2=11,PS3=1,PS4=10, daq rate=3.7kHz @30uA, daq saturated, 2.1M events, CerC=900V |
| 608 | 2 | Jixie Zhang | 4484 TS1,TS2,TS3,TS4, PS1=8,PS2=12,PS3=1,PS4=10, daq rate=3.7kHz @40uA, daq saturated, 1.0M events, CerC=920V |
| 609 | 1 | Jixie Zhang | 4485 TS1,TS2,TS3,TS4, PS1=10,PS2=12,PS3=1,PS4=10, daq rate=3.7kHz @60uA, daq saturated, 4.2M events, CerC=940V |
| 610 | 2 | Jixie Zhang | 4486 TS1,TS2,TS3,TS4, PS1=10,PS2=12,PS3=1,PS4=11, daq rate=3.7kHz @60uA, daq saturated, 6.8M events, CerC=950V |
| 611 | 3 | Jixie Zhang | |
| 612 | 1 | Jixie Zhang | From now on CerC=950V |
| 613 | 2 | Jixie Zhang | 4487 TS2,PS2=11, daq rate=2.5kHz @60uA, 823k events |
| 614 | 1 | Jixie Zhang | 4488 TS4,PS4=8, daq rate=3.7kHz @60uA, daq saturated, 783k events |
| 615 | 2 | Jixie Zhang | 4489 TS1,TS2,TS3,TS4, PS1=8,PS2=12,PS3=8,PS4=10, daq rate=3.7kHz @60uA, daq saturated, 8.3M events |
| 616 | 4490 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=10, daq rate=3.4kHz @60uA, 71.7M events |
||
| 617 | 3 | Jixie Zhang | subrun 4490_06.evio and later have no HV on GEMs or CerD due to HV board tripped off |
| 618 | 5 | Jixie Zhang | |
| 619 | 1 | Jixie Zhang | ========================================================================== |
| 620 | 5 | Jixie Zhang | == MPOD Board A is off for the following runs, CerD and GEM detectors are using that board == |
| 621 | 2 | Jixie Zhang | The MPod board A log shows that is was turned off at March 7, 01:37:29 |
| 622 | 3 | Jixie Zhang | subrun 4490_06.evio till run 4511 have all been affected |
| 623 | 1 | Jixie Zhang | |
| 624 | 2 | Jixie Zhang | ==pedestal== |
| 625 | 1 | Jixie Zhang | 4492 pedestal, no beam HV on |
| 626 | |||
| 627 | 4493 TS4,PS4=0, threshold: 15mV(ShowerSum), daq rate=2.9kHz @5uA, 456k events |
||
| 628 | |||
| 629 | 2 | Jixie Zhang | ==GEM latency changed in file /home/solid/gem-cfg/ssp_apv_default.txt from 58 to 56 == |
| 630 | 4494 TS4,PS4=0, threshold: 120-190mV(ShowerSum), threshold changed during the run, 20uA, daq not saturated, 276k events |
||
| 631 | 4495 TS4,PS4=0, threshold: 140mV(ShowerSum), rate=3.7kHz @ 30uA, daq is saturated, 2.7M events |
||
| 632 | 4496 TS4,PS4=0, threshold: 250mV(ShowerSum), rate=2.8kHz @ 40uA, rate=3.7kHz @ 50uA, daq is saturated, 598k events |
||
| 633 | 4497 TS4,PS4=0, threshold: 280mV(ShowerSum), rate=3.4kHz @ 50uA, rate=1.0kHz @60uA, detector saturated, 680k events |
||
| 634 | 4498 TS4,PS4=0, threshold: 280mV(ShowerSum), rate=1.0kHz @60uA, detector saturated, 385k events |
||
| 635 | 4499 TS4,PS4=0, threshold: 200mV(ShowerSum), rate=3.7kHz @60uA, detector saturated, daq saturated, ~380k events, coda crashed |
||
| 636 | 4500 TS4,PS4=0, threshold: 250mV(ShowerSum), rate=3.7kHz @45uA, rate=1.8kHz @60uA, detector saturated at 45uA, ~380k events |
||
| 637 | 4501 TS4,PS4=0, threshold: 300mV(ShowerSum), rate=3.7kHz @45uA, rate=0.8kHz @60uA, detector saturated at 45uA, 101k events |
||
| 638 | |||
| 639 | 4502 TS1,PS1=7, threshold: 35mV(cerSum) & 70mV(ShowerSum), rate=1.7kHz @60uA, Cer saturated @ 20uA, ~583k events |
||
| 640 | 4503 TS1,PS1=6, threshold: 35mV(cerSum) & 70mV(ShowerSum), rate=3.4kHz @60uA, Cer saturated @ 20uA, 487k events, coda crashed |
||
| 641 | 4504 trash, ssp error |
||
| 642 | 4505 TS1,PS1=6, threshold: 35mV(cerSum) & 70mV(ShowerSum), rate=3.4kHz @60uA, Cer saturated @ 20uA, 1.2M events, coda crashed |
||
| 643 | |||
| 644 | 4506 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=10, daq rate=3.4kHz @60uA, 487k events, coda crashed |
||
| 645 | 1 | Jixie Zhang | 4507 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=11, daq rate=3.4kHz @60uA, 817k events, coda crashed |
| 646 | |||
| 647 | ==I found that if I am copying data to /cache from the same hard drive that coda is using, coda will crash == |
||
| 648 | |||
| 649 | 5 | Jixie Zhang | 4508 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=11, daq rate=3.7kHz @50uA, daq is saturated, 580k events, |
| 650 | 4509 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=12, daq rate=3.7kHz @50uA, daq is saturated, 1.2M events, |
||
| 651 | 1 | Jixie Zhang | |
| 652 | 5 | Jixie Zhang | 4510 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=12, daq rate=3.7kHz @50uA, daq is saturated, 2.2M events, |
| 653 | 4511 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.0kHz @50uA, 1.7M events, |
||
| 654 | 1 | Jixie Zhang | |
| 655 | 5 | Jixie Zhang | == MPOD Board A is off for the above runs, CerD and GEM detectors are using that board == |
| 656 | 1 | Jixie Zhang | The MPod board A log shows that it was turned off at March 7, 01:37:29 |
| 657 | run 4490_06.evio till run 4511 have all been affected |
||
| 658 | 2 | Jixie Zhang | ========================================================================== |
| 659 | |||
| 660 | 5 | Jixie Zhang | 4512 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, 6.2M events, |
| 661 | 4513 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, 1.2M events, |
||
| 662 | 1 | Jixie Zhang | |
| 663 | 2 | Jixie Zhang | 4514 trash, TS1,PS1=8, threshold: 20mV(CerSum) & 70mV(ShowerSum), 1.4k events, no beam, epics events only |
| 664 | 1 | Jixie Zhang | |
| 665 | 2 | Jixie Zhang | ==change CerSum threshold from 35mV to 25mV, this will be 2.5 pe after Cer gainmatch== |
| 666 | 5 | Jixie Zhang | 4515 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, ~7M events, |
| 667 | 4516 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, ~6M events, |
||
| 668 | 4517 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, 47M events, |
||
| 669 | 4518 TS1,TS2,TS3,TS4, PS1=9,PS2=12,PS3=8,PS4=13, daq rate=3.2kHz @50uA, 6.5M events, |
||
| 670 | 1 | Jixie Zhang | |
| 671 | 4519 TS1,PS1=7, threshold: 20mV(CerSum) & 70mV(ShowerSum), rate=2.3kHz @ 50uA, 650k events, |
||
| 672 | 2 | Jixie Zhang | |
| 673 | 1 | Jixie Zhang | == GEM2 started to show problem from here == |
| 674 | 2 | Jixie Zhang | |
| 675 | 1 | Jixie Zhang | 4520 trash, TS2,PS2=10, threshold: 35mV(SC_D) & 35mV(SC_B), SSP err, coda crashed after 1.4k events |
| 676 | 2 | Jixie Zhang | 4521-4530 trash, ssp error, coda crashed or could not start |
| 677 | 1 | Jixie Zhang | |
| 678 | 2 | Jixie Zhang | ==11:10 power cycle MPD vme srate |
| 679 | ==power cycle the GEM vme crate by the following cmd: == |
||
| 680 | 1 | Jixie Zhang | crate_power solidcrate1 0 #turn off crate |
| 681 | crate_power solidcrate1 1 #turn on crate |
||
| 682 | 2 | Jixie Zhang | --------------------------------------------------------- |
| 683 | 1 | Jixie Zhang | |
| 684 | 5 | Jixie Zhang | ==11:25 SC_A HV tripped at 11:02, can not bring it back, reboot MPOD |
| 685 | 2 | Jixie Zhang | 4531 trash, ssp error |
| 686 | ==switch to hallc_fadc config, no GEM== |
||
| 687 | 4532 TS4,PS4=0, threshold: 280mV(ShowerSum), rate=900Hz @60uA, detector saturated, ~280k events |
||
| 688 | 1 | Jixie Zhang | 4533 TS4,PS4=0, threshold: 180mV(ShowerSum), rate=8.4kHz @60uA, detector saturated, ~2.6M events |
| 689 | 4534 TS4,PS4=0, threshold: 180mV(ShowerSum), rate=8.4kHz @60uA, detector saturated, ~7.1M events |
||
| 690 | |||
| 691 | ==switch to hallc_fadc_ssp config, reboot solidcrate1, power cycle LV== |
||
| 692 | 4535-4436 trash, ssp error |
||
| 693 | |||
| 694 | ==reboot sbsvme22 == |
||
| 695 | ==powered off LV, wait 10s, then powered it on== |
||
| 696 | 4537-4439 trash, ssp error |
||
| 697 | |||
| 698 | ==switch to hallc_fadc config, no GEM== |
||
| 699 | 5 | Jixie Zhang | 4540 TS4,PS4=0, threshold: 180mV(ShowerSum), rate=12.7kHz @45uA, rate=8.4kHz @60uA, |
| 700 | 1 | Jixie Zhang | detector saturated if beam current>45uA, 22M events |
| 701 | |||
| 702 | ==GEM latency changed in file /home/solid/gem-cfg/ssp_apv_default.txt from 56 to 60???? == |
||
| 703 | |||
| 704 | 12:25 HV increased to HV setting1 (?,?,?,?) |
||
| 705 | 4541-4560 debugging GEMs, GEM HV scan, Latency scan, they are not production data for GEM |
||
| 706 | |||
| 707 | TS1,TS2,TS3,TS4, PS1=7,PS2=10,PS3=8,PS4=0, |
||
| 708 | 4547 400k |
||
| 709 | 4553 12M |
||
| 710 | |||
| 711 | ==GEM2 is disabled, GEM HVs(3650,3900,3900,3900)== |
||
| 712 | 13:09, HV increased to HV setting2 (3650,3900,3900,3900) |
||
| 713 | 4554 300k |
||
| 714 | 4555 300k |
||
| 715 | 4556 14M |
||
| 716 | 4557 50k |
||
| 717 | 4558 14M |
||
| 718 | 4559 600k |
||
| 719 | |||
| 720 | 5 | Jixie Zhang | 4560 TS1,TS2,TS3,TS4, PS1=7,PS2=10,PS3=8,PS4=0, rate=4.6kHz @40uA, daq is saturated, 9.2M events, |
| 721 | 1 | Jixie Zhang | Most of the events are TS4, |
| 722 | 4561 TS4,PS4=0, threshold: 210mV(ShowerSum), rate=4.0kHz @40uA, ~17M events |
||
| 723 | |||
| 724 | 4562-4564 trash |
||
| 725 | |||
| 726 | ==GEM latency scan start== |
||
| 727 | 4565 TS4,PS4=0, threshold: 210mV(ShowerSum), 2.9M events, latency=58 |
||
| 728 | 4566 TS4,PS4=0, threshold: 210mV(ShowerSum), 126k events, latency=56 |
||
| 729 | 4567 TS4,PS4=0, threshold: 210mV(ShowerSum), 202k events, latency=59 |
||
| 730 | 4568 TS4,PS4=0, threshold: 210mV(ShowerSum), 132k events, latency=62 |
||
| 731 | 4569 TS4,PS4=0, threshold: 210mV(ShowerSum), 193k events, latency=65 |
||
| 732 | 4570 TS4,PS4=0, threshold: 210mV(ShowerSum), 284k events, latency=68 |
||
| 733 | 4571 TS4,PS4=0, threshold: 210mV(ShowerSum), 157k events, latency=53 |
||
| 734 | 4572 TS4,PS4=0, threshold: 210mV(ShowerSum), 476k events, latency=50 |
||
| 735 | ==GEM latency scan end== |
||
| 736 | |||
| 737 | == production without GEM since latency not know yet == |
||
| 738 | 4573 TS4,PS4=0, threshold: 180mV(ShowerSum), rate=7.5kHz @40uA, 19.5M events |
||
| 739 | |||
| 740 | == production with GEM == |
||
| 741 | == MPOD board B tripped off == |
||
| 742 | |||
| 743 | 4574 trash,TS4,PS4=0, threshold: 210mV(ShowerSum), MPOD board B tripped off, HVs are ramping up |
||
| 744 | |||
| 745 | 5 | Jixie Zhang | 4575 TS4,PS4=0, threshold: 210mV(ShowerSum), rate=4.0kHz @40uA, 12M events,latency=57 |
| 746 | 4576 TS4,PS4=0, threshold: 210mV(ShowerSum), rate=4.0kHz @40uA, 4.8M events,latency=59 |
||
| 747 | 4577 TS4,PS4=0, threshold: 210mV(ShowerSum), rate=4.0kHz @40uA, 44M events,latency=58 |
||
| 748 | From subrun 43, beam current went up to 50uA, daq saturated |
||
| 749 | 4578 TS2,PS2=10, Threshold: SC_D(35mV) & SC_B(35mV), rate=4.6kHz @50uA, daq saturated, 685k events,latency=58 |
||
| 750 | 4579 TS2,PS2=11, Threshold: SC_D(35mV) & SC_B(35mV), rate=2.7kHz @50uA, 7.4M events,latency=58 |
||
| 751 | 4580 TS1,PS1=6, Threshold1: CerSum(25mV, 2.5pe) & ShowerSum(70mV), rate=4.3kHz @50uA, 5.4M events,latency=58 |
||
| 752 | 4581 TS1,PS1=7, Threshold1: CerSum(25mV, 2.5pe) & ShowerSum(70mV), rate=2.2kHz @50uA, 13M events,latency=58 |
||
| 753 | 4582 TS4,PS4=11, threshold: 15mV(ShowerSum), rate=900Hz @45uA, 828k events,latency=58 |
||
| 754 | 4583 TS4,PS4=9, threshold: 15mV(ShowerSum), rate=3.5kHz @45uA, 9M events,latency=58 |
||
| 755 | 4584 TS4,PS4=9, threshold: 15mV(ShowerSum), rate=2.1kHz @40uA, 180k events,latency=58 |
||
| 756 | 4585 TS4,PS4=8, threshold: 15mV(ShowerSum), rate=4.1kHz @40uA, 912k events,latency=58 |
||
| 757 | 1 | Jixie Zhang | rate=4.5kHz @50uA, beam curent go up to 50uA at the end so daq was almost or already saturated |
| 758 | 5 | Jixie Zhang | 4586 TS4,PS4=9, threshold: 15mV(ShowerSum), rate=2.1kHz @50uA, 19.5M events,latency=58 |
| 759 | 1 | Jixie Zhang | |
| 760 | |||
| 761 | ==GEM latency scan start== |
||
| 762 | 5 | Jixie Zhang | 4587 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 28k events,latency=58 |
| 763 | 4588 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 118k events,latency=60 |
||
| 764 | 1 | Jixie Zhang | 4589 trash, ssp error |
| 765 | 4590 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 30k events,latency=62 //can not cook this run |
||
| 766 | 5 | Jixie Zhang | 4591 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 30k events,latency=64 |
| 767 | 4592 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 40k events,latency=56 |
||
| 768 | 4593 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 33k events,latency=54 |
||
| 769 | 4594 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 38k events,latency=52 |
||
| 770 | 4595 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 54k events,latency=62 |
||
| 771 | 4596 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 31k events,latency=59 |
||
| 772 | 4597 TS4,PS4=0, threshold: 480mV(ShowerSum), rate=80Hz @40uA, 38k events,latency=57 |
||
| 773 | 1 | Jixie Zhang | ==GEM latency scan end== |
| 774 | |||
| 775 | |||
| 776 | 5 | Jixie Zhang | 4598 TS4,PS4=0, threshold: 210mV(ShowerSum), rate=3.5kHz @40uA, 9.3M events,latency=57 |
| 777 | 1 | Jixie Zhang | 4599 trash, no beam |
| 778 | |||
| 779 | 4600 pedestal, beam off HV on |
||
| 780 | |||
| 781 | ====GEM latency changed to 57====== |
||
| 782 | 4601-4607 trash, debug GEM |
||
| 783 | |||
| 784 | 4608-4609 pedestal, beam off, HV on |
||
| 785 | |||
| 786 | 4611 TS4,PS4=0 threshold: 230mV (ShowerSum), rate=3.0 kHz @40uA, 700K events |
||
| 787 | 4612 TS4,PS4=0 threshold: 230mV (ShowerSum), rate=2.7 kHz @40uA, 8.6M events |
||
| 788 | 4613 TS4,PS4=0 threshold: 230mV (ShowerSum), rate=2.7 kHz @40uA, 6.5M events |
||
| 789 | 4614 TS1,PS1=8 threshold: 25mV(CerSum) & 70mV(ShowerSum), rate= 0.4kHz @40uA, 15K events |
||
| 790 | 4615 junk |
||
| 791 | 4616 TS1,PS1=6 threshold: 25mV(CerSum) & 70mV(ShowerSum), rate=1.2kHz, 40k events |
||
| 792 | 4617 TS1,PS1=6 threshold: 25mV(CerSum) & 70mV(ShowerSum), rate=1.2kHz, 80k events |
||
| 793 | 4618 TS1,PS1=5 threshold: 25mV(CerSum) & 70mV(ShowerSum), rate=2.2kHz, 4.4M, beam tripped for the last 20 minutes |
||
| 794 | 5 | Jixie Zhang | kcoda after run 4618. The Event Rate gui in CODA disappeared. |
| 795 | 4619 TS1,TS4,PS1=5,PS4=2 threshold: TS1:25mV(CerSum) & 70mV(ShowerSum),TS4:230mV,rate=3.0kHz, 7.6M |
||
| 796 | 1 | Jixie Zhang | ------ CODA Error, ER1. Had to kcoda |
| 797 | 4620 TS1,TS4,PS1=5,PS4=2 threshold: TS1:25mV(CerSum) & 70mV(ShowerSum),TS4:230mV,rate=3.0kHz, 4M events----- CODA crash |
||
| 798 | 4621 TS1,PS1=5 threshold: 25mV(CerSum) & 70mV(ShowerSum),rate=2.2kHz, 4.6M events |
||
| 799 | 4622 TS1,PS1=5 threshold: 25mV(CerSum) & 70mV(ShowerSum),rate=2.2kHz, 13M events |
||
| 800 | 4623 TS2,PS2=11 threshold: 35mV(SC_B) & 35mV(SC_D),rate=2.3kHz, 13M events |
||
| 801 | 5 | Jixie Zhang | 4624 trash, TS3,PS3=10,threshold: 31mV(SC_A) & 35mV(SC_D), no beam |
| 802 | 1 | Jixie Zhang | 4625 pedestal, beam off, HV on |
| 803 | 4626 pedestal, beam off, HV on |
||
| 804 | 5 | Jixie Zhang | 4627 TS1,TS2,PS1=7,PS2=11, threshold: TS1:25mV(CerSum) & 70mV(ShowerSum),TS2=35mV(SC_B) & 35mV(SC_D), |
| 805 | 1 | Jixie Zhang | expected_rate=0.7kHz+2.3kHz,5M events |
| 806 | 4628 TS4 low, PS4=9, threshold: 15mV(ShowerSum), rate=3kHz, 20M |
||
| 807 | 4629 TS4 high, PS4=0, threshold: 230mV(ShowerSum), rate=3.7kHz DAQ saturated, increasing threshold |
||
| 808 | 4630 TS4 high, PS4=0, threshold: 340mV(ShowerSum), rate=800Hz, decreasing threshold slightly |
||
| 809 | 4631 TS4 high, PS4=0, threshold: 310mV(ShowerSum), rate=1.4kz, leaving threshold here in case of 70uA beam, 18M events |
||
| 810 | 5 | Jixie Zhang | 4632 TS2, PS2=11 threshold: 35mV(SC_B) & 35mV(SC_D),rate=2.2kHz, 30M events |
| 811 | 1 | Jixie Zhang | 4633 TS4 low, PS4=9, threshold: 15mV(ShowerSum), rate= 3.0kHz events 19.9 M |
| 812 | 4634 TS4 low, PS4=9, threshold: 15mV(ShowerSum), rate= 3.0kHz, events 16.9 M |
||
| 813 | 4635 TS1, PS1=5, threshold: 25mV(CerSum) & 70mV(ShowerSum), rate= 3.1kHz,10M events: 1 hour run |
||
| 814 | 4636 TS1, PS1=5, threshold: 25mV(CerSum) & 70mV(ShowerSum), rate= 3.1kHz,15M events: 2 hour run |
||
| 815 | 5 | Jixie Zhang | 4637 TS1, PS1=5, threshold: 25mV(CerSum) & 70mV(ShowerSum), rate= 3.1kHz,1.4M events: 20 minutes, |
| 816 | 1 | Jixie Zhang | ----Mike"I think 3 hours and 20 minutes is good on TS1. Take some T2" |
| 817 | 4638 TS2, PS2=11 threshold: 35mV(SC_B) & 35mV(SC_D),rate=2.2kHz. Testing Prescale. 70k events |
||
| 818 | 5 | Jixie Zhang | 4639 TS2, PS2=10 threshold: 35mV(SC_B) & 35mV(SC_D),rate=4.2kHz, daq Saturated, 70k events |
| 819 | 1 | Jixie Zhang | ----Mike"I thought I could adjust the prescale, but the rate was 4 kHz. Going back ps2=11 |
| 820 | 5 | Jixie Zhang | 4640 TS2, PS2=11 threshold: 35mV(SC_B) & 35mV(SC_D),rate=2.2kHz, ~3.2M events have GEM data |
| 821 | 1 | Jixie Zhang | ----end of this run, HV for GEMS and CerD were off at 14:23, part of subrun 5, whole subrun 6,7 have no GEM data |
| 822 | 5 | Jixie Zhang | 4641 junk, TS1, TS2,TS4, PS2=11,PS4=0 threshold: 35mV(SC_B) & 35mV(SC_D),rate=4,1kHz, ----Junk, enabled TS1 as well. |
| 823 | 1 | Jixie Zhang | 4642 junk, ----- CODA error (SSP timeout). will Reset CODA, download |
| 824 | 5 | Jixie Zhang | 4643 Junk, -----CODA error |
| 825 | 4644 TS2, PS2=11,PS4=0 threshold2: 35mV(SC_B) & 35mV(SC_D), threshold4: 370mV, rate= 2.6 kHz. HV for GEM or CerD is off. 1.1M events NO GEM |
||
| 826 | 1 | Jixie Zhang | 4645 TS2, PS2=11,PS4=0 threshold2: 35mV(SC_B) & 35mV(SC_D), threshold4: 370mV, rate= 2.6 kHz. GEMS are back on. 9.6M events |
| 827 | 4646 TS2, PS2=11,PS4=0 threshold2: 35mV(SC_B) & 35mV(SC_D), threshold4: 370mV, rate= 2.6 kHz. 6.4M events |
||
| 828 | 4647 TS3, PS3=10, threshold: 31mV(SC_A) & 35mV(SC_D), rate=430Hz @45uA, rate=3.3kHz @20uA. 198k events (very clean, daq never saturated) |
||
| 829 | 4648 TS3, PS3=8, threshold: 31mV(SC_A) & 35mV(SC_D), rate=1.7kHz @45uA, 1.9M events (daq saturated at 10uA<I<35uA, need to apply bcm cut) |
||
| 830 | 4649 TS3, PS3=10, threshold: 31mV(SC_A) & 35mV(SC_D), rate=0.4kHz @45uA, rate=3.3kHz @20uA, 2M events (very clean, daq never saturated) |
||
| 831 | |||
| 832 | 4650 TS3,TS2, PS3=8,PS2=12, threshold3: 31mV(SC_A) & 35mV(SC_D), rate=1.8kHz @45uA, threshold2: 35mV(SC_B) & 35mV(SC_D),rate=1.1kHz @45uA, |
||
| 833 | expected_rate=1.8+1.1=2.9kHz @45 uA, daq will be ssaturated at 10uA<I<35uA, need to apply bcm cut |
||
| 834 | Actual rate is ~2.7kHz, 19M |
||
| 835 | 4651 TS3,TS2, PS3=8,PS2=12, threshold3: 31mV(SC_A) & 35mV(SC_D) && threshold2: 35mV(SC_B) & 35mV(SC_D), rate=2.7k, 10.5M events. Beam tripped for the last 20 minutes |
||
| 836 | 4652 TS3,TS2, PS3=8,PS2=12, threshold3: 31mV(SC_A) & 35mV(SC_D) && threshold2: 35mV(SC_B) & 35mV(SC_D), rate=2.7k, 20.5M events |
||
| 837 | 4653 TS3,TS2, PS3=8,PS2=12, threshold3: 31mV(SC_A) & 35mV(SC_D) && threshold2: 35mV(SC_B) & 35mV(SC_D), rate=2.7k, 38M events |
||
| 838 | |||
| 839 | 4654 TS4_high, PS4=0, threshold: 310mV(ShowerSum), rate=2.7kHz @48uA, 0.5kHz@65uA. Detector partly saturated. 1.1M events |
||
| 840 | 4655 TS4_low, PS4=11, threshold: 15mV(ShowerSum), rate=3.7kHz @70uA. daq saturated. 110k events |
||
| 841 | 4656 TS4_low, PS4=12, threshold: 15mV(ShowerSum), rate=1.9kHz @70uA. 6.2M events |
||
| 842 | 4657 TS4_low, PS4=12, threshold: 15mV(ShowerSum), rate=1.5kHz @80uA. 926k events |
||
| 843 | 5 | Jixie Zhang | |
| 844 | 4658 pedestal, beam off, HVs on |
||
| 845 | |||
| 846 | 1 | Jixie Zhang | 4659 TS4_low, PS4=12, threshold: 15mV(ShowerSum), rate=2.7kHz @48uA, 1.9kHz@70uA. 5.5M events, stoped because of HV issues |
| 847 | 5 | Jixie Zhang | From the raw data, It seemed that the MPOD HV started to have have problem since 19:02, subrun 8. When it happened, |
| 848 | 1 | Jixie Zhang | no more triggers come to the coda. We will need to look into the data to verify this. |
| 849 | 5 | Jixie Zhang | |
| 850 | 1 | Jixie Zhang | 4660 TS4 low, PS4=10, threshold: 15mV(ShowerSum), NO GEM. rate=1.5kHz @50uA, 422k |
| 851 | 5 | Jixie Zhang | |
| 852 | 4661 TS4_low, PS4=12, threshold: 15mV(ShowerSum), With GEM. 20k events. |
||
| 853 | 1 | Jixie Zhang | CODA did not show ER rates, stop this run to restart coda. |
| 854 | 5 | Jixie Zhang | 4662 TS4_low, PS4=12, threshold: 15mV(ShowerSum), With GEM. rate=2.6kHz @67uA, 250k events. |
| 855 | 1 | Jixie Zhang | CODA did not show ER rates, stop this run to restart coda. |
| 856 | 5 | Jixie Zhang | 4663 TS4_low, PS4=12, threshold: 15mV(ShowerSum), With GEM. rate=2.6kHz @67uA, 5.1M events. |
| 857 | 1 | Jixie Zhang | CODA crashed at the end |
| 858 | 5 | Jixie Zhang | 4664 TS4_low, PS4=12, threshold: 15mV(ShowerSum), With GEM. rate=2.6kHz @67uA, 1.3M events. |
| 859 | 1 | Jixie Zhang | |
| 860 | 4665 TS1, PS1=7, threshold: 25mV(CerSum) & 70mV(ShowerSum), rate= 1.8kHz @65uA, 505k events |
||
| 861 | 4666 TS1,TS4_low, PS1=7, PS4=12, threshold1: 25mV(CerSum) & 70mV(ShowerSum), threshold4: 15mV(ShowerSum), |
||
| 862 | 5 | Jixie Zhang | expected_rate=1.8+1.3=3.1kHz @65uA, actual_rate=3.0kHz @65uA, 6.0M events |
| 863 | 1 | Jixie Zhang | |
| 864 | 5 | Jixie Zhang | 4667 TS1,TS4_low, PS1=7, PS4=12, threshold1: 25mV(CerSum) & 70mV(ShowerSum), threshold4: 15mV(ShowerSum), |
| 865 | 1 | Jixie Zhang | rate=3.0kHz @65uA, 45M events |
| 866 | 5 | Jixie Zhang | 4668 TS1,TS4_low, PS1=7, PS4=12, threshold1: 25mV(CerSum) & 70mV(ShowerSum), threshold4: 15mV(ShowerSum), |
| 867 | rate=3.0kHz @65uA, 10.2M good events with GEM. HV board for GEM and CERD was tripped off at 9:31. |
||
| 868 | 1 | Jixie Zhang | Part of subrun 16 is affected, full subruns 17-18 are affected. |
| 869 | 5 | Jixie Zhang | 4669 TS3, PS=10, threshold 31mV(SC_A)&&35mV(SC_D), rate up to 3.7 kHz when beam is >30 uA, |
| 870 | 1 | Jixie Zhang | beam was very trippy taking data on beam ramp ups, 2.5M events |
| 871 | |||
| 872 | 4670 Pedestal run, 100k pulser triggers, beam off, HV on |
||
| 873 | |||
| 874 | 4671 TS1, PS=0, threshold: 40mV(CerSum)&&210mV(ShowerSum), first ~1.5k events with 10uA beam, rest of data up to 3.5kHz, 150k events |
||
| 875 | 5 | Jixie Zhang | 4672 TS1, PS=0, threshold: 40mV(CerSum)&&300mV(ShowerSum), rate 450Hz, 70uA, 340k events |
| 876 | 1 | Jixie Zhang | |
| 877 | 4673 TS1, PS=0, threshold: 40mV(CerSum)&&300mV(ShowerSum), rate=2.3kHz @40uA, rate 450Hz @70uA, 84k events |
||
| 878 | 5 | Jixie Zhang | When the bema ramping up, diaggui scaler rate: TS2=220kHz, TS3=800kHz @10uA, |
| 879 | |||
| 880 | 1 | Jixie Zhang | 4674 TS4, PS4=0, threshold: 310mV(ShowerSum), rate=3.0kHz @45uA, rate 500Hz @70uA, 102k events |
| 881 | 4675 TS3, PS=11, threshold 31mV(SC_A)&&35mV(SC_D), rate = 70Hz @ ~40uA, rate=0Hz @70uA, 40k events |
||
| 882 | 4676 TS3, PS=8, threshold 31mV(SC_A)&&35mV(SC_D), rate = 3.7kHz @ ~15uA,daq saturated, 671k events |
||
| 883 | |||
| 884 | 5 | Jixie Zhang | 4677 TS1,TS3,TS4: PS1=0,PS3=10,PS4=0, |
| 885 | 1 | Jixie Zhang | threshold1 = 40mV(CerSum, 4pe) && 230mV(ShowerSum), threshold3: 31mV(SC_A)&&35mV(SC_D), threshold4= 340mV(ShowerSum), |
| 886 | rate=260Hz @70uA, 280k events |
||
| 887 | 5 | Jixie Zhang | |
| 888 | 1 | Jixie Zhang | 4678 TS1,TS3,TS4: PS1=0,PS3=10,PS4=0, 41k events, rate=260Hz @5uA |
| 889 | 5 | Jixie Zhang | |
| 890 | 4679 TS1 TS4, determine threshold, threshold1 = 25mV(CerSum, 2.5pe) && 70mV(ShowerSum) --> 250Hz @5uA |
||
| 891 | 1 | Jixie Zhang | threshold4= 120mV(ShowerSum) --> 450Hz @5uA, 82k event. threshold are channgingduring this run |
| 892 | |||
| 893 | 5 | Jixie Zhang | 4680 TS1,TS3,TS4: PS1=0,PS3=7,PS4=0, |
| 894 | 1 | Jixie Zhang | threshold1 = 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), threshold3: 31mV(SC_A)&&35mV(SC_D), threshold4= 120mV(ShowerSum), |
| 895 | rate=2.6kHz @ 5uA |
||
| 896 | 5 | Jixie Zhang | |
| 897 | 4681 TS1,TS3,TS4: PS1=0,PS3=7,PS4=0, |
||
| 898 | 1 | Jixie Zhang | threshold1 = 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), threshold3: 31mV(SC_A)&&35mV(SC_D), threshold4= 120mV(ShowerSum), |
| 899 | 151k events, beam current ramping up from 5uA to 40uA |
||
| 900 | 5 | Jixie Zhang | |
| 901 | 1 | Jixie Zhang | 4682 TS4_high, PS4=0, threshold: 310mV(ShowerSum), rate=2.3kHz @45uA, 0.6kHz@65uA. 762k events |
| 902 | 4683 TS4_high, PS4=0, threshold: 310mV(ShowerSum), rate=2.3kHz @45uA, 0.6kHz@65uA. 43k events |
||
| 903 | |||
| 904 | 5 | Jixie Zhang | 4684 TS1,TS4: PS1=7,PS4=0, threshold1=25mV(CerSum, 2.5pe) && 70mV(ShowerSum), threshold4=310mV(ShowerSum), |
| 905 | 1 | Jixie Zhang | rate=2.2kHz @65uA, 25.5M events, approx 50% each trigger |
| 906 | 5 | Jixie Zhang | -->TS1: 82% pass ShowerSum>1000 cut |
| 907 | 4685 TS2,TS4_high: PS2=12, PS4=0, threshold2: 35mV(SC_B)&&35mV(SC_D) threshold4: 280mV(ShowerSum), rate=2.5kHz @ 65uA, |
||
| 908 | 1 | Jixie Zhang | detectors partially saturated, 16.5M events |
| 909 | |||
| 910 | 5 | Jixie Zhang | 4686 TS2,TS4_high: PS2=12, PS4=0, threshold2: 35mV(SC_B)&&35mV(SC_D) threshold4: 280mV(ShowerSum), rate=2.5kHz @ 65uA, |
| 911 | 1 | Jixie Zhang | detectors partially saturated, 43.1M events |
| 912 | |||
| 913 | 4687 pedestal, beam off, HVs on |
||
| 914 | 4688 pedestal, beam off, HVs off |
||
| 915 | |||
| 916 | 5 | Jixie Zhang | ---------------------------------------------------------------------------------- |
| 917 | 20230315 work done in the hall |
||
| 918 | 1) change TS3 trigger to 'SC_C & SC_D & ShowerSum' |
||
| 919 | |||
| 920 | 4689 pedestal, beam off, HVs on, NO GEM |
||
| 921 | 4690 pedestal, beam off, HVs on, with GEM |
||
| 922 | |||
| 923 | 4691 TS4_high: PS4=0, threshold: 280mV(ShowerSum), rate=3.7kHz @ 40uA, rate=2.9kHz @ 60uA, |
||
| 924 | detectors partially saturated, 430k events |
||
| 925 | 4692 TS4_high: PS4=0, threshold: 280mV(ShowerSum), rate=3.7kHz @ 40uA, rate=2.9kHz @ 60uA, |
||
| 926 | detectors partially saturated, 450k events |
||
| 927 | |||
| 928 | 4693 TS4_high: PS4=0, threshold: 310mV(ShowerSum), rate=3.5kHz @ 40uA, rate=2.5kHz @ 60uA, 1.8M events |
||
| 929 | From diaggui scaler histogram, TS2=3.4MHz, TS3 rate is ~1.5MHz @60uA, |
||
| 930 | SC_D rate 8MHz, SC_C rate 6MHz, ShowerSum rate 6MHz @60uA, (these rates is 50% off to their true values) |
||
| 931 | |||
| 932 | 4694 TS3: PS3=10, threshold: 31mV(SC_C) & 35mV(SC_D) & 15mV(ShowerSum), rate=3.0kHz @ 60uA, 28.8M events |
||
| 933 | 4695 TS3: PS3=10, threshold: 31mV(SC_C) & 35mV(SC_D) & 15mV(ShowerSum), rate=3.0kHz @ 60uA, 4.0M events |
||
| 934 | |||
| 935 | 4696 TS3: PS3=10, threshold: 31mV(SC_C) & 35mV(SC_D) & 310mV(ShowerSum), rate=3.0kHz @ 60uA, 420 events |
||
| 936 | 4697 TS3: PS3=0, threshold: 31mV(SC_C) & 35mV(SC_D) & 310mV(ShowerSum), rate=0.8kHz @ 60uA, 603k events |
||
| 937 | |||
| 938 | 4698 TS1,TS3: PS1=0,PS3=0, threshold1: 25mV(CerSum, 2.5pe) && 310mV(ShowerSum), TS1_rate=1.2kHz @ 60uA, |
||
| 939 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 310mV(ShowerSum), TS3_rate=0.8kHz @ 60uA, |
||
| 940 | actual_rate=2.0kHz @ 60uA, 653k events |
||
| 941 | |||
| 942 | 4699 TS1,TS3: PS1=0,PS3=0, threshold1: 25mV(CerSum, 2.5pe) && 280mV(ShowerSum), |
||
| 943 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 280mV(ShowerSum), rate=2.5kHz @ 60uA, 497k events |
||
| 944 | |||
| 945 | 4700 TS1,TS3,TS4: PS1=0,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 280mV(ShowerSum), |
||
| 946 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 280mV(ShowerSum), threshold4: 420mV(ShowerSum), |
||
| 947 | rate=2.7kHz @ 60uA, 5.5M events. whole MPOD was tripped off. CODA crashed at ~01:20 |
||
| 948 | |||
| 949 | 4701 TS1,TS3,TS4: PS1=0,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 280mV(ShowerSum), |
||
| 950 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 280mV(ShowerSum), threshold4: 420mV(ShowerSum), |
||
| 951 | rate=2.7kHz @ 60uA, 250k events. Ramping up HVs during the run |
||
| 952 | |||
| 953 | 4702 TS1,TS3,TS4: PS1=0,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 280mV(ShowerSum), |
||
| 954 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 280mV(ShowerSum), threshold4: 420mV(ShowerSum), |
||
| 955 | rate=2.7kHz @ 60uA, 13.3M events. |
||
| 956 | |||
| 957 | 4703 TS1,TS3,TS4: PS1=0,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 280mV(ShowerSum), |
||
| 958 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 280mV(ShowerSum), threshold4: 420mV(ShowerSum), |
||
| 959 | rate=2.7kHz @ 60uA, 1.6M events. |
||
| 960 | |||
| 961 | 4704 TS3: PS3=0, threshold: 31mV(SC_C) & 35mV(SC_D) & 245mV(ShowerSum), rate=1.8kHz @ 60uA, 987k events |
||
| 962 | |||
| 963 | 4705 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 245mV(ShowerSum), |
||
| 964 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 245mV(ShowerSum), threshold4: 245mV(ShowerSum), |
||
| 965 | rate=3.7kHz @ 60uA, 450k events. daq saturated due to TS4 threshold too low |
||
| 966 | |||
| 967 | 4706 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 245mV(ShowerSum), |
||
| 968 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 245mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 969 | rate=3.0kHz @ 60uA, 10.7M events. |
||
| 970 | |||
| 971 | ==high ShowerSum energy run, study trigger efficiency, match to sim. rate== |
||
| 972 | 4707 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 560mV(ShowerSum), |
||
| 973 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 560mV(ShowerSum), threshold4: 560mV(ShowerSum), |
||
| 974 | TS3 rate=40Hz, total rate=140Hz @ 60uA,132k events. <---4GeV---- |
||
| 975 | |||
| 976 | 4708 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 720mV(ShowerSum), |
||
| 977 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 720mV(ShowerSum), threshold4: 720mV(ShowerSum), |
||
| 978 | TS3 rate=8Hz, total rate=30Hz @ 60uA, will take 108k events. <---5.2GeV---- |
||
| 979 | |||
| 980 | 4709 TS6,PS6=0, threshold: 20adc (5mV) for each channel, 2 out 16 individual Cer inputs, rate=3.7kHz @ 8uA-15uA, |
||
| 981 | rate=680Hz @ 60uA, daq saturated from 8uA to 15uA, DSC saturated from 15uA, 1.7M events |
||
| 982 | |||
| 983 | 4710 TS6,PS6=0, threshold: 20adc (5mV) for CerC, 41adc (10mv) for CerA,CerB,CerD, 2 out 16 individual Cer inputs, |
||
| 984 | rate=3.7kHz @ 8uA-15uA, rate=750Hz @ 60uA, daq saturated from 8uA to 15uA, DSC saturated from 15uA, 516k events |
||
| 985 | |||
| 986 | 4711 TS6,PS6=0, threshold: (12,15,20,20adc) for CerC, 41adc (10mv) for CerA,CerB,CerD, 2 out 16 individual Cer inputs, |
||
| 987 | rate=3.7kHz @ 8uA-15uA, rate=730Hz @ 60uA, daq saturated from 8uA to 15uA, DSC saturated from 15uA, 3.5M events |
||
| 988 | |||
| 989 | 4712 TS6,PS6=0, threshold: (18,20,25,25adc) for CerC, 61adc (15mv) for CerA,CerB,CerD, 2 out 16 individual Cer inputs, |
||
| 990 | rate=3.7kHz @ 8uA-15uA, rate=1.2kHz @ 60uA, daq saturated from 8uA to 15uA, DSC saturated from 15uA, 670k events |
||
| 991 | FADC250_ALLCH_TET 61 61 61 61 61 61 61 61 18 20 25 25 61 61 61 61 |
||
| 992 | |||
| 993 | 4713 TS6,PS6=0, threshold: (61,61,20,61adc) for channel(3,6,9,12), 2 out 4 center individual Cer inputs, |
||
| 994 | rate=3.7kHz @ 60uA, daq saturated, 92k events |
||
| 995 | FADC250_ALLCH_TET 61 61 61 61 61 61 61 61 18 20 25 25 61 61 61 61 |
||
| 996 | FADC250_TRG_MASK 0 0 0 1 0 0 1 0 0 1 0 0 1 0 0 0 |
||
| 997 | |||
| 998 | 4714 TS6,PS6=1, threshold: (61,61,20,61adc) for channel(3,6,9,12), 2 out 4 center individual Cer inputs, |
||
| 999 | rate=3.7kHz @ 60uA, daq saturated, 123k events |
||
| 1000 | |||
| 1001 | 4715 TS6,PS6=2, threshold: (61,61,20,61adc) for channel(3,6,9,12), 2 out 4 center individual Cer inputs, |
||
| 1002 | rate=3.7kHz @ 60uA, daq saturated, 136k events |
||
| 1003 | |||
| 1004 | 4716 TS6,PS6=10, threshold: (61,61,20,61adc) for channel(3,6,9,12), 2 out 4 center individual Cer inputs, , |
||
| 1005 | rate=170Hz @ 60uA, 63k events |
||
| 1006 | |||
| 1007 | 4717 TS6,PS6=6, threshold: (61,61,20,61adc) for channel(3,6,9,12), 2 out 4 center individual Cer inputs, |
||
| 1008 | rate=2.6kHz @ 60uA, 1.6M events |
||
| 1009 | |||
| 1010 | 4718 TS6,PS6=6, threshold: (18,20,25,25adc) for CerC, 61adc (15mv) for CerA,CerB,CerD, 3 out 16 individual Cer inputs, |
||
| 1011 | rate=2.6kHz @ 25uA, rate=1.8kHz @ 60uA, DSC partly saturated, 670k events |
||
| 1012 | FADC250_ALLCH_TET 61 61 61 61 61 61 61 61 18 20 25 25 61 61 61 61 |
||
| 1013 | |||
| 1014 | ******************************************************************* |
||
| 1015 | From run 4719-4728, after ending TS6 data taking, forgot to change FADC config file back. |
||
| 1016 | Slot7 FADC250_W_OFFSET was 1340 (for TS6 only), should be 1140. --> slot 7 Peak pos add 50 |
||
| 1017 | Slot8 FADC250_ALLCH_DELAY was set an extra delay of 200ns (for TS6 only) --> slot 7 Peak pos add 50 |
||
| 1018 | Because this mistake, the trigger particle waveform tail will be chopped for Slot 8 detectors. |
||
| 1019 | This will reduce their integral by up to 8%, but it is correctable. |
||
| 1020 | We do not need to retake run 4719 to 4728 if we are running out of time |
||
| 1021 | |||
| 1022 | ==TS4_high special run data start== |
||
| 1023 | 4719 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 420mV(ShowerSum), |
||
| 1024 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 420mV(ShowerSum), threshold4: 420mV(ShowerSum), |
||
| 1025 | TS3 rate=16Hz, total rate=500Hz @ 60uA, 998k events <---3.0GeV---- |
||
| 1026 | |||
| 1027 | 4720 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 480mV(ShowerSum), |
||
| 1028 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 480mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1029 | TS3 rate=80Hz, total rate=250Hz @ 60uA, 624k events <---3.4GeV---- |
||
| 1030 | |||
| 1031 | 4721 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 280mV(ShowerSum), |
||
| 1032 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 280mV(ShowerSum), threshold4: 280mV(ShowerSum), |
||
| 1033 | TS3 rate=1.0kHz, total rate=2.9kHz @ 60uA, 6.0M events <---2.0GeV---- |
||
| 1034 | |||
| 1035 | 4722 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 310mV(ShowerSum), |
||
| 1036 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 310mV(ShowerSum), threshold4: 310mV(ShowerSum), |
||
| 1037 | TS3 rate=0.8kHz, total rate=2.5kHz @ 60uA, 4.2M events <---2.3GeV-- |
||
| 1038 | ==TS4_high special run data end== |
||
| 1039 | |||
| 1040 | ==continue TS3 threshold scan @ 245mV== |
||
| 1041 | 4723 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 245mV(ShowerSum), |
||
| 1042 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 245mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1043 | TS1_rate=0.9kHz, TS3_rate=1.8kHz,TS4_rate=0.3kHz, total_rate=3.0kHz @ 60uA, 2.5M events. CODA crashed |
||
| 1044 | |||
| 1045 | 4724 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 245mV(ShowerSum), |
||
| 1046 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 245mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1047 | TS1_rate=0.9kHz, TS3_rate=1.8kHz,TS4_rate=0.3kHz, total_rate=3.0kHz @ 60uA, 1.8M events. CODA crashed |
||
| 1048 | |||
| 1049 | 4725 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 245mV(ShowerSum), |
||
| 1050 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 245mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1051 | TS1_rate=0.9kHz, TS3_rate=1.8kHz,TS4_rate=0.3kHz, total_rate=3.0kHz @ 60uA, 6.4M events. |
||
| 1052 | |||
| 1053 | 4726 TS3: PS3=0, threshold3: 31mV(SC_C) & 35mV(SC_D) & 210mV(ShowerSum), rate=4.3kHz @45uA, rate=2.9kHz @ 60uA, |
||
| 1054 | Threshold for the first 87k events is 245mV, then changed to 210mV. 860k events |
||
| 1055 | |||
| 1056 | 4727 TS3: PS3=1, threshold3: 31mV(SC_C) & 35mV(SC_D) & 210mV(ShowerSum), rate=2.2kHz @45uA, rate=1.5kHz @ 60uA, 1.2M events |
||
| 1057 | |||
| 1058 | 4728 TS1,TS3,TS4: PS1=2,PS3=1,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 210mV(ShowerSum), |
||
| 1059 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 210mV(ShowerSum), threshold4: 420mV(ShowerSum), |
||
| 1060 | TS1_rate=1.1kHz, TS3_rate=1.5kHz,TS4_rate=0.5kHz, total_rate=2.9kHz @ 60uA, 3.0M events. |
||
| 1061 | |||
| 1062 | From run 4719-4728, after ending TS6 data taking, forgot to change FADC config file back. |
||
| 1063 | Slot7 FADC250_W_OFFSET was 1340 (for TS6 only), should be 1140. --> slot 7 Peak pos add 50 |
||
| 1064 | Slot8 FADC250_ALLCH_DELAY was set an extra delay of 200ns (for TS6 only) --> slot 7 Peak pos add 50 |
||
| 1065 | Because this mistake, the trigger particle waveform tail will be chopped for Slot 8 detectors. |
||
| 1066 | This will reduce their integral by up to 8%, but it is correctable. |
||
| 1067 | We do not need to retake run 4719 to 4728 if we are running out of time |
||
| 1068 | ******************************************************************* |
||
| 1069 | |||
| 1070 | retake 4728, 210mV |
||
| 1071 | 4729 TS1,TS3,TS4: PS1=2,PS3=1,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 210mV(ShowerSum), |
||
| 1072 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 210mV(ShowerSum), threshold4: 420mV(ShowerSum), |
||
| 1073 | TS1_rate=1.1kHz, TS3_rate=1.5kHz,TS4_rate=0.5kHz, total_rate=2.9kHz @ 60uA, 20.3M events. |
||
| 1074 | |||
| 1075 | retake 4723-4725, 245mV |
||
| 1076 | 4730 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 245mV(ShowerSum), |
||
| 1077 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 245mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1078 | TS1_rate=0.9kHz, TS3_rate=1.8kHz,TS4_rate=0.3kHz, total_rate=3.0kHz @ 60uA, 1.7M events. |
||
| 1079 | |||
| 1080 | 4731 trash |
||
| 1081 | 4732 TS3: PS3=1, threshold3: 31mV(SC_C) & 35mV(SC_D) & 180mV(ShowerSum), rate=2.7kHz @ 60uA, 1.3M events |
||
| 1082 | |||
| 1083 | 4733 TS3,TS4: PS3=1,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 180mV(ShowerSum), |
||
| 1084 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 180mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1085 | TS3_rate=2.7kHz,TS4_rate=0.3kHz, total_rate=2.9kHz @ 60uA, 26M events. |
||
| 1086 | |||
| 1087 | retake 4723-4725, 245mV |
||
| 1088 | 4734 TS1,TS3,TS4: PS1=2,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 245mV(ShowerSum), |
||
| 1089 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 245mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1090 | TS1_rate=0.9kHz, TS3_rate=1.8kHz,TS4_rate=0.3kHz, total_rate=3.0kHz @ 60uA, 8.9M events. |
||
| 1091 | |||
| 1092 | 4735 --- junk |
||
| 1093 | 4736 Pedestal run. No Beam. Pulser enabled, HV on |
||
| 1094 | ------Disabled pulser after run. Back to production setting------- |
||
| 1095 | 4737 - Junk, mistakenly hit start after redownloading the readout list |
||
| 1096 | |||
| 1097 | |||
| 1098 | -------------------Luminosity Scan Start------------------------------------------ |
||
| 1099 | 4738 10uA TS1,TS3,TS4: PS1=0,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 480mV(ShowerSum), |
||
| 1100 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 480mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1101 | TS3 rate=80Hz, total rate=250Hz @ 10uA, 288k events <---3.4GeV |
||
| 1102 | 1 | Jixie Zhang | |
| 1103 | 5 | Jixie Zhang | They started the luminosity scan. The thresholds of ShowerSum were adjusted to 70 mV |
| 1104 | 4739 15uA TS1,TS3,TS4: PS1=0,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && ?mV(ShowerSum), |
||
| 1105 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 50mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1106 | TS3 rate=?Hz, total rate=250Hz @ 10uA, 1.3M events |
||
| 1107 | |||
| 1108 | 4740 25uA TS1,TS2,TS3,TS4: PS1=1,PS2=10,PS3=1,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1109 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 40mV(ShowerSum), threshold4: 420mV(ShowerSum), |
||
| 1110 | TS3 rate=?Hz, total rate=3.1kHz @ 10uA, 660k events |
||
| 1111 | Disable TS2 (but first 100k it was there) |
||
| 1112 | 4742: 1.4M |
||
| 1113 | 4743: 160k |
||
| 1114 | 4744: 35 uA TS1,TS3,TS4, PS1=4,PS3=4,PS4=0, 2.7kHz |
||
| 1115 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1116 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 50mV(ShowerSum), threshold4: 420mV(ShowerSum), 900k |
||
| 1117 | 4745 40uA, junk rate to high (4 kHZ) |
||
| 1118 | 1 | Jixie Zhang | |
| 1119 | 5 | Jixie Zhang | 4746: 40 uA TS1,TS3,TS4, PS1=5,PS3=4,PS4=0, 3.0 kHz |
| 1120 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1121 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), 940k |
||
| 1122 | 1 | Jixie Zhang | |
| 1123 | 5 | Jixie Zhang | 4747: 45 uA TS1,TS3,TS4, PS1=5,PS3=5,PS4=0, 3.1 kHz |
| 1124 | (Counting house stopped the 40 uA scan run. I increased the PS3 preparing for the increasing current. MCC tripped at 30-35 uA) |
||
| 1125 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1126 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), 1.7M |
||
| 1127 | 1 | Jixie Zhang | |
| 1128 | 5 | Jixie Zhang | 4748: 45 uA TS1,TS3,TS4, PS1=5,PS3=5,PS4=0, 3.1 kHz |
| 1129 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1130 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), 2.0 M |
||
| 1131 | 1 | Jixie Zhang | |
| 1132 | 5 | Jixie Zhang | 4749: 45 uA TS1,TS3,TS4, PS1=5,PS3=5,PS4=0, 3.1 kHz |
| 1133 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1134 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), 1.2 M |
||
| 1135 | last 30 seconds at 55 uA |
||
| 1136 | 4750- 4751 : My computer crashed. Opened vncviwer on seperate computer, but it wasn't work well. was adjusting prescales |
||
| 1137 | 4752 55 uA TS1,TS3,TS4, PS1=7,PS3=6,PS4=0, 3.1 kHz |
||
| 1138 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1139 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), ? M (I was still recovering my computer and missed the final number of events) |
||
| 1140 | |||
| 1141 | |||
| 1142 | 4753 65 uA TS1,TS3,TS4, PS1=7,PS3=7,PS4=0, 4.1 kHz junk |
||
| 1143 | |||
| 1144 | 4754 65 uA TS1,TS3,TS4, PS1=8,PS3=8,PS4=0,2.4 kHz |
||
| 1145 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1146 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), 900k |
||
| 1147 | 4755 70 uA TS1,TS3,TS4, PS1=8,PS3=8,PS4=0,2.7 kHz |
||
| 1148 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1149 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), 1.6 M |
||
| 1150 | -----------------------End of Deuterium Luminosity Scan------------------------------------------------ |
||
| 1151 | |||
| 1152 | |||
| 1153 | 4756 15 uA TS1,TS3,TS4, PS1=1,PS3=1,PS4=0, kHz |
||
| 1154 | |||
| 1155 | 4757 15 uA TS1,TS3,TS4, PS1=0,PS3=0,PS4=0, 500 Hz |
||
| 1156 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1157 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), 370 k |
||
| 1158 | |||
| 1159 | 4758 30 uA TS1,TS3,TS4, PS1=0,PS3=0,PS4=0, 1.70 kHz |
||
| 1160 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1161 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), 800 k |
||
| 1162 | ---- They began ramping to 45 uA at the last 20 seconds |
||
| 1163 | 4759 45 uA TS1,TS3,TS4, PS1=1,PS3=0,PS4=0, 2.80 kHz |
||
| 1164 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1165 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), 1.2 M |
||
| 1166 | --- end of run at 60 uA |
||
| 1167 | 4760 60 uA TS1,TS3,TS4, PS1=1,PS3=1,PS4=0, 4 kHz --- Junk |
||
| 1168 | |||
| 1169 | 4761 60 uA TS1,TS3,TS4, PS1=2,PS3=2,PS4=0, 2.80 kHz |
||
| 1170 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1171 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), 1.7M |
||
| 1172 | ---end of run t 70 uA -- daq @4 kHz (1 min) |
||
| 1173 | 4762 70 uA TS1,TS3,TS4, PS1=3,PS3=3,PS4=0, 2.60 kHz |
||
| 1174 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1175 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum),1.4 M |
||
| 1176 | ------------ |
||
| 1177 | Dummy 40 uA |
||
| 1178 | 4763 40 uA TS1,TS3,TS4, PS1=9,PS3=9,PS4=0, 100 Hz --- Junk |
||
| 1179 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1180 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), |
||
| 1181 | 4764 40 uA TS1,TS3,TS4, PS1=5,PS3=5,PS4=0, 0 200 Hz --- Junk |
||
| 1182 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1183 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), |
||
| 1184 | 4765 40 uA TS1,TS3,TS4, PS1=1,PS3=1,PS4=0, 1.10 Hz --- Junk - still to low |
||
| 1185 | |||
| 1186 | 4766 40 uA TS1,TS3,TS4, PS1=0,PS3=0,PS4=0, 2.20 kHz |
||
| 1187 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), |
||
| 1188 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 420mV(ShowerSum), M |
||
| 1189 | |||
| 1190 | 4767 40 uA TS1,TS3,TS4, PS1=0,PS3=0,PS4=0, 10 Hz |
||
| 1191 | threshold1: 25mV(CerSum, 2.5pe) && 420mV(ShowerSum), |
||
| 1192 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 420mV(ShowerSum), threshold4: 420mV(ShowerSum), 3,800 events |
||
| 1193 | (maybe only 2,000 useful) |
||
| 1194 | 4768 40 uA TS1,TS3,TS4, PS1=0,PS3=0,PS4=0, 1.5 kHz |
||
| 1195 | threshold1: 25mV(CerSum, 2.5pe) && 120mV(ShowerSum), |
||
| 1196 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 120mV(ShowerSum), threshold4: 120mV(ShowerSum), 143 k |
||
| 1197 | -------end of luminosity ------ |
||
| 1198 | |||
| 1199 | 4769 pedestal, beam off, HVs on |
||
| 1200 | From now on, first 100k is always pulse trigger |
||
| 1201 | |||
| 1202 | |||
| 1203 | 4770 TS1,TS3,TS4, PS1=0,PS3=0,PS4=0,LD2 target, rate=1.5kHz @10uA,1.0 M events |
||
| 1204 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), --> TS1_rate=1.0kHz |
||
| 1205 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 70mV(ShowerSum), --> TS3_rate=0.5kHz |
||
| 1206 | threshold4: 420mV(ShowerSum), --> TS4_rate |
||
| 1207 | The random pulser was included when beam was steady at 10uA: |
||
| 1208 | the DAQ rate was 3.7 during the first 100 k |
||
| 1209 | |||
| 1210 | 4771 TS1,TS3,TS4, PS1=0,PS3=0,PS4=0,LD2 target, rate=1.7kHz @10uA, 180 k events |
||
| 1211 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), --> TS1_rate=1.0kHz |
||
| 1212 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), --> TS3_rate=1.0kHz |
||
| 1213 | threshold4: 420mV(ShowerSum), --> TS4_rate |
||
| 1214 | The random pulser was included when beam was steady at 10uA |
||
| 1215 | |||
| 1216 | 4772 TS1,TS3,TS4, PS1=0,PS3=0,PS4=0,LD2 target, rate=2.2kHz @10uA, 980 k events |
||
| 1217 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), --> TS1_rate=1.0kHz |
||
| 1218 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 50mV(ShowerSum), --> TS3_rate=1.2kHz |
||
| 1219 | threshold4: 420mV(ShowerSum), --> TS4_rate |
||
| 1220 | The random pulser was included when beam was steady at 10uA |
||
| 1221 | |||
| 1222 | 4773 TS1,TS3,TS4, PS1=0,PS3=1,PS4=0,LD2 target, rate=4.2kHz @10uA, daq saturated, 130k |
||
| 1223 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), --> TS1_rate=1.0kHz |
||
| 1224 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 15mV(ShowerSum), --> TS3_rate=9.6kHz |
||
| 1225 | threshold4: 420mV(ShowerSum), --> TS4_rate |
||
| 1226 | The random pulser was included when beam was steady at 10uA: |
||
| 1227 | the DAQ rate was 3.7 during the first 100 k |
||
| 1228 | |||
| 1229 | 4774 TS1,TS3,TS4, PS1=0,PS3=2,PS4=0,LD2 target, rate=3.8kHz @10uA, daq saturated |
||
| 1230 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), --> TS1_rate=1.0kHz |
||
| 1231 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 15mV(ShowerSum), --> TS3_rate0=4.8kHz |
||
| 1232 | threshold4: 420mV(ShowerSum), --> TS4_rate |
||
| 1233 | The random pulser was included when beam was steady at 10uA |
||
| 1234 | |||
| 1235 | 4775 junk |
||
| 1236 | 4776 TS1,TS3,TS4, PS1=0,PS3=4,PS4=0,LD2 target, rate=2.2kHz @10uA, 1.8 M |
||
| 1237 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), --> TS1_rate=1.0kHz |
||
| 1238 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 15mV(ShowerSum), --> TS3_rate=1.2kHz |
||
| 1239 | threshold4: 420mV(ShowerSum), --> TS4_rate |
||
| 1240 | The random pulser was included when beam was steady at 10uA |
||
| 1241 | |||
| 1242 | 4777 TS2, PS2=7,LD2 target, rate=1.8kHz @10uA, 852k events |
||
| 1243 | threshold2: 35mV(SC_D) & 35mV(SC_B), |
||
| 1244 | first 100k pulse trigger at 10uA |
||
| 1245 | |||
| 1246 | 4778 TS2,TS4_low, PS2=7,PS4=7,LD2 target, rate=2.8kHz @10uA, 450k events, |
||
| 1247 | threshold2: 35mV(SC_D) & 35mV(SC_B), --> TS3_rate=1.8kHz |
||
| 1248 | threshold4: 15mV(ShowerSum), --> TS4_rate=1.0kHz |
||
| 1249 | first 100k pulse trigger at 10uA, coda crashed due to disk was full |
||
| 1250 | |||
| 1251 | 4779 TS2,TS4_low, PS2=7,PS4=7,LD2 target, rate=2.8kHz @10uA, 3724k events, |
||
| 1252 | threshold2: 35mV(SC_D) & 35mV(SC_B), --> TS3_rate=1.8kHz |
||
| 1253 | threshold4: 15mV(ShowerSum), --> TS4_rate=1.0kHz |
||
| 1254 | first 100k pulse trigger at 10uA, |
||
| 1255 | |||
| 1256 | 4780 TS4_high, PS4=0,LD2 target, rate=1.1kHz @10uA, 964k events, |
||
| 1257 | threshold4: 120mV(ShowerSum), --> TS4_rate=1.1kHz |
||
| 1258 | first 100k pulse trigger at 10uA, |
||
| 1259 | |||
| 1260 | 4781 TS3,TS4_high, PS2=0,PS4=0,LD2 target, rate=2.4kHz @10uA, 3281k events, |
||
| 1261 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 40mV(ShowerSum), --> TS3_rate=2.2kHz |
||
| 1262 | threshold4: 180mV(ShowerSum), --> TS4_rate=200Hz |
||
| 1263 | first 100k pulse trigger at 10uA, |
||
| 1264 | |||
| 1265 | 4782 TS1,TS3,TS4_high, PS1=0,PS3=0,PS4=0,LD2 target, rate=1.7kHz @10uA, 2.126M events, |
||
| 1266 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), --> TS1_rate=1.0kHz |
||
| 1267 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), --> TS3_rate=1.0kHz |
||
| 1268 | threshold4: 280mV(ShowerSum), --> TS4_rate=20Hz |
||
| 1269 | first 100k pulse trigger at 10uA, TS3 enabled at 167k triggers |
||
| 1270 | |||
| 1271 | 4783 TS3_low,TS4_high, PS3=3,PS4=0,LD2 target, rate=2.5kHz @10uA, 2.265M events, |
||
| 1272 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 15mV(ShowerSum), --> TS3_rate=2.3kHz |
||
| 1273 | threshold4: 180mV(ShowerSum), --> TS4_rate=200Hz |
||
| 1274 | first 100k pulse trigger at 10uA, |
||
| 1275 | |||
| 1276 | 4784 junk, ssp error |
||
| 1277 | 4785 TS3_high,TS4_high, PS3=0,PS4=7,LD2 target, rate=1.1kHz @10uA, 134k events, |
||
| 1278 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 15mV(ShowerSum), --> TS3 disabled in vmeDSC |
||
| 1279 | threshold4: 180mV(ShowerSum), --> TS4_rate=200Hz |
||
| 1280 | first 100k pulse trigger at 10uA, short run, 134k events, stop to change PS4 |
||
| 1281 | |||
| 1282 | 4786 TS3_high,TS4_high, PS3=0,PS4=6,LD2 target, rate=2.8kHz @10uA, 1.7M events, |
||
| 1283 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 70mV(ShowerSum), --> TS3_rate=0.6kHz |
||
| 1284 | threshold4: 15mV(ShowerSum), --> TS4_rate=2.2kHz |
||
| 1285 | first 100k pulse trigger at 10uA, TS3 enabled after 293k events, coda crashed |
||
| 1286 | |||
| 1287 | 4787 TS3_high,TS4_high, PS3=0,PS4=6,LD2 target, rate=2.8kHz @10uA, 731k events, |
||
| 1288 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 70mV(ShowerSum), --> TS3_rate=0.6kHz |
||
| 1289 | threshold4: 15mV(ShowerSum), --> TS4_rate=2.2kHz |
||
| 1290 | first 100k pulse trigger at 10uA, |
||
| 1291 | |||
| 1292 | ==10uA beam on LD2 summary== |
||
| 1293 | TS1: 477[0126], 600k + 40k + (880k+1.7M) *1/2.2 ~= 1.8M ? * 1.0/1.7 = 1.2M |
||
| 1294 | TS2: 477[789], 752k+ (350k+3624k)*1.8/2.8 ~= 3.3M |
||
| 1295 | TS3_low: 4776,4783, 1.8M*1.2/2.2=982k + 2.165M ~= 3.1M |
||
| 1296 | TS3_40mV: 4781, 3181k*2.2/2.4 ~= 2.9M |
||
| 1297 | TS3_50mV: 4772, 480k |
||
| 1298 | TS3_60mV: 4771,4782, 40k+2026k*1.0/1.7= 1.2M |
||
| 1299 | TS3_70mV: 4770, 330k |
||
| 1300 | TS4_low: 477[89], 478[67], (450k+3724k)*1.0/2.8 + 2.1M *2.2/2.8 ~= 3.0M |
||
| 1301 | TS4_120: 4780, 864k |
||
| 1302 | TS4_180: 478[13], 3181k*0.2/2.4 + 2165k*0.2/2.5= 438k |
||
| 1303 | TS4_280: 4782, 2026k*0.02/1.7 = 24k |
||
| 1304 | ==10uA beam on LD2 summary end == |
||
| 1305 | |||
| 1306 | |||
| 1307 | ==20230132 20uA beam on LD2 target== |
||
| 1308 | |||
| 1309 | 4788 TS1,PS1=0, rate=4.6kHz @ 20uA, daq saturated, 188k events |
||
| 1310 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), --> TS1_rate=4.6kHz |
||
| 1311 | first 100k pulse trigger at 20uA, |
||
| 1312 | |||
| 1313 | 4789 TS1,PS1=1, rate=2.3kHz @ 20uA, daq saturated, 640k events |
||
| 1314 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), --> TS1_rate=2.3kHz |
||
| 1315 | first 100k pulse trigger at 20uA, |
||
| 1316 | |||
| 1317 | 4790 TS1,PS1=1, rate=2.8kHz @ 20uA, daq saturated, 1291k events |
||
| 1318 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), --> TS1_rate=2.3kHz |
||
| 1319 | threshold4: 180mV(ShowerSum), --> TS4_rate=0.5kHz |
||
| 1320 | first 100k pulse trigger at 20uA, CODA crashed |
||
| 1321 | |||
| 1322 | 4791 trash, no beam |
||
| 1323 | |||
| 1324 | 4792 TS1,TS3,TS4: PS1=1,PS3=0,PS4=0, rate=?kHz @ 20uA, daq saturated, 10M events |
||
| 1325 | threshold1: 25mV(CerSum, 2.5pe) && 180mV(ShowerSum), --> TS1_rate=?kHz |
||
| 1326 | threshold3: 31mV(SC_C) & 35mV(SC_D) && 180mV(ShowerSum), --> TS3_rate=1.0kHz |
||
| 1327 | threshold4: 180mV(ShowerSum), --> TS4_rate=0.5kHz |
||
| 1328 | first 100k pulse trigger at 0uA, |
||
| 1329 | |||
| 1330 | 4793 daq saturated , only good for study background |
||
| 1331 | |||
| 1332 | 4794 TS1,TS4: PS1=4,PS4=4 rate=2.2kHz @ 40uA, 4M events |
||
| 1333 | threshold1: 25mV(CerSum, 2.5pe) && 70mV(ShowerSum), --> TS1_rate=1.9kHz |
||
| 1334 | threshold4: 180mV(ShowerSum), --> TS4_rate=300Hz |
||
| 1335 | first 100k pulse trigger at 40uA, |
||
| 1336 | |||
| 1337 | 4795 TS1,TS3,TS4: PS1=4,PS3=2,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 150mV(ShowerSum), |
||
| 1338 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 150mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1339 | TS1_rate=0.8kHz, TS3_rate=1.5kHz,TS4_rate=120Hz, total_rate=2.7kHz @ 50uA, |
||
| 1340 | 100k pulser triggers at the start, 7M events, current increased to 60 uA and daq saturated |
||
| 1341 | |||
| 1342 | 4796 TS1,TS3,TS4: PS1=7,PS3=2,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 150mV(ShowerSum), |
||
| 1343 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 150mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1344 | TS1_rate=0.2kHz, TS3_rate=2.5kHz,TS4_rate=0.2kHz, total_rate=2.7kHz @ 60uA, |
||
| 1345 | 100k pulse triggers at the start, daq still saturated, 300k events |
||
| 1346 | |||
| 1347 | 4797 TS1,TS3,TS4: PS1=6,PS3=3,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 150mV(ShowerSum), |
||
| 1348 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 150mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1349 | TS1_rate=0.2kHz, TS3_rate=1.2kHz,TS4_rate=0.2kHz, total_rate=2.6kHz @ 60uA, 100k pulse |
||
| 1350 | triggers at the start, my estimates calculating PS from diagui have been off, current |
||
| 1351 | increased to 70 uA, daq rate =1.7kHz, 10M events, |
||
| 1352 | |||
| 1353 | 4798 TS1,TS3,TS4: PS1=0,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 420mV(ShowerSum), |
||
| 1354 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 420mV(ShowerSum), threshold4: 420mV(ShowerSum), |
||
| 1355 | total rate=300Hz @ 50uA, 1M events <---3.0GeV----, GEM2 HV=3950V |
||
| 1356 | |||
| 1357 | 4799 junk, HV was chaning during this run. |
||
| 1358 | |||
| 1359 | 4800 TS1,TS3,TS4: PS1=0,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 310mV(ShowerSum), |
||
| 1360 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 310mV(ShowerSum), threshold4: 310mV(ShowerSum), |
||
| 1361 | total rate=1.2kHz @ 50uA, stopped at 500k events to look at new GEM HV data |
||
| 1362 | GEM1 HV=3700V GEM2,3 HV=3950V, GEM4 HV=3900 |
||
| 1363 | |||
| 1364 | 4801 TS1,TS3,TS4: PS1=0,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 310mV(ShowerSum), |
||
| 1365 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 310mV(ShowerSum), threshold4: 310mV(ShowerSum), |
||
| 1366 | total rate=1.2kHz @ 50uA, 2.9M events GEM1 HV=3700V GEM2,3 HV=3950V, GEM4 HV=3900 |
||
| 1367 | |||
| 1368 | 4802 TS1,TS3,TS4: PS1=0,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 280mV(ShowerSum), |
||
| 1369 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 280mV(ShowerSum), threshold4: 280mV(ShowerSum), |
||
| 1370 | TS3 rate=1.0kHz, total rate=0.8kHz @ 70uA, 130k events to check GEMs, GEM1 HV=3700V, GE |
||
| 1371 | M2 HV=3950V, GEM3 HV 4000, GEM4 HV=3900 |
||
| 1372 | |||
| 1373 | 4803 TS1,TS3,TS4: PS1=0,PS3=0,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 280mV(ShowerSum), |
||
| 1374 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 280mV(ShowerSum), threshold4: 280mV(ShowerSum), |
||
| 1375 | TS3 rate=1.0kHz, total rate=0.8kHz @ 70uA, 4M events, GEM1 HV=3700V, GE |
||
| 1376 | M2 HV=3950V, GEM3 HV 4000, GEM4 HV=3900 |
||
| 1377 | |||
| 1378 | 4804 trash |
||
| 1379 | |||
| 1380 | 4805 TS1,TS3,TS4: PS1=5,PS3=4,PS4=7, threshold1: 25mV(CerSum, 2.5pe) && 120mV(ShowerSum), |
||
| 1381 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 120mV(ShowerSum), threshold4: 120mV(ShowerSum), |
||
| 1382 | TS1_rate=0.8kHz, TS3_rate=1.7kHz,TS4_rate=0.8kHz, total_rate=3.5kHz @ 60uA, 270k events |
||
| 1383 | |||
| 1384 | 4806 TS1,TS3,TS4: PS1=6,PS3=4,PS4=8, threshold1: 25mV(CerSum, 2.5pe) && 120mV(ShowerSum), |
||
| 1385 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 120mV(ShowerSum), threshold4: 120mV(ShowerSum), |
||
| 1386 | TS1_rate=0.4kHz, TS3_rate=1.7kHz,TS4_rate=0.4kHz, total_rate=2.6kHz @ 60uA, 20M events |
||
| 1387 | |||
| 1388 | 4807 trash, nothing |
||
| 1389 | |||
| 1390 | 4808 TS1,TS3,TS4: PS1=7,PS3=5,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 90mV(ShowerSum), |
||
| 1391 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 90mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1392 | TS1_rate=0.5kHz, TS3_rate=2.5.7kHz,TS4_rate=0.1kHz, total_rate=3.0kHz @ 68uA, 300k |
||
| 1393 | events, 100k pulser, HV trip |
||
| 1394 | |||
| 1395 | 4809 trash, nothing, CODA stuck |
||
| 1396 | |||
| 1397 | 4810 TS1,TS3,TS4: PS1=8,PS3=5,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 90mV(ShowerSum), |
||
| 1398 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 90mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1399 | TS1_rate=0.2kHz, TS3_rate=2.7kHz,TS4_rate=30Hz, total_rate=2.8kHz @ 68uA, 10M |
||
| 1400 | events, 100k pulser, |
||
| 1401 | |||
| 1402 | 4811 TS1,TS3,TS4: PS1=9,PS3=7,PS4=0, threshold1: 25mV(CerSum, 2.5pe) && 60mV(ShowerSum), |
||
| 1403 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 60mV(ShowerSum), threshold4: 480mV(ShowerSum), |
||
| 1404 | TS1_rate=0.4kHz, TS3_rate=1.4kHz,TS4_rate=40Hz, total_rate=2.5kHz @ 68uA, 30M events |
||
| 1405 | |||
| 1406 | 4812 TS4: PS4=12, threshold4: 15mV(ShowerSum), total_rate=2.5kHz @ 68uA, 32M events |
||
| 1407 | |||
| 1408 | 4813 TS4: PS4=12, threshold4: 15mV(ShowerSum), total_rate=2.3kHz @ 60uA, 6M events |
||
| 1409 | |||
| 1410 | 4814 TS1: PS1=8 Threshold1: 40mV(CerSum) & 70mV (ShowerSum), rate =0.9 kHz, 190k events |
||
| 1411 | Pulser is when beam is ramping up: (at 20 uA) |
||
| 1412 | |||
| 1413 | 4815 TS1: PS1=7, Threshold1: 40mV(CerSum) & 70mV (ShowerSum), rate =1.9 kHz, 24k events |
||
| 1414 | Pulser is when beam is at full current: (at 60 uA). Beam kept tripping. |
||
| 1415 | Ramped back up to 30 uA for 5 minutes. Not sure what they are doing |
||
| 1416 | |||
| 1417 | 4816 TS1: PS1=6 Threshold1: 40mV(CerSum) & 70mV (ShowerSum), rate =3.4 kHz. (I adjsted the |
||
| 1418 | prescales after being at 30 uA for 10 minutes. Then they ramped back to 60) |
||
| 1419 | |||
| 1420 | 4817 TS1: PS1=7 Threshold1: 40mV(CerSum) & 70mV (ShowerSum), rate =1.9 kHz, 4.3M events |
||
| 1421 | Pulser is on when beam is at full current: (at 60 uA). |
||
| 1422 | |||
| 1423 | 4818 TS1: PS1=7 Threshold1: 40mV(CerSum) & 70mV (ShowerSum), rate =1.9 kHz, 4.5M events |
||
| 1424 | Pulser is on when beam is at full current: (at 60 uA). |
||
| 1425 | |||
| 1426 | 4819 TS1: PS1=5 Threshold1: 40mV(CerSum) & 120mV (ShowerSum), rate =1.5 kHz, 180k events |
||
| 1427 | Pulser is was on when beam is at full current (60 uA) but beam tripped at towards the end of the 100k events |
||
| 1428 | |||
| 1429 | 4820 TS1: PS1=4 Threshold1: 40mV(CerSum) & 120mV (ShowerSum), rate = 2.9kHz,4.4M events |
||
| 1430 | Pulser is was on when beam is at a current of 30 uA. The current then ramped up to 60 uA |
||
| 1431 | |||
| 1432 | 4821 TS1: PS1=4 Threshold1: 40mV(CerSum) & 120mV (ShowerSum), rate =2.9kHz,5.2M events |
||
| 1433 | Pulser is was on when beam is at a current of 50 uA |
||
| 1434 | |||
| 1435 | 4822 TS2: PS2=10 Threshold2: 35mV(SC_B) & 35mV (SC_D), rate =3.9kHz, 200k events--- Forgot to change prescale! |
||
| 1436 | Pulser events (100k) were taken during beam ramping up from 10 -40 uA |
||
| 1437 | |||
| 1438 | 4823 TS2: PS2=11 Threshold2: 35mV(SC_B) & 35mV (SC_D), rate =2.6kHz, 8.7M events |
||
| 1439 | Pulser events (100k) were taken at 55 uA |
||
| 1440 | |||
| 1441 | 4824 TS3: PS3=5: threshold3: 62mV(SC_C) & 70mV(SC_D) & 15mV(ShowerSum), rate = 3.7 kHz, 200k events |
||
| 1442 | Pulser events (100k) were taken at 55 uA |
||
| 1443 | |||
| 1444 | 4825 TS3: PS3=6: threshold3: 62mV(SC_C) & 70mV(SC_D) & 15mV(ShowerSum), rate = 3.7 kHz, 200k events, prescaled changed but rate is the same? |
||
| 1445 | Pulser events (100k) were taken at 55 uA |
||
| 1446 | |||
| 1447 | 4826 TS3: PS3=6: threshold3: 62mV(SC_C) & 70mV(SC_D) & 15m-30V(ShowerSum), rate = 3.7 kHz, 700k events, prescaled changed but rate is the same, Adjusted showersum threshold |
||
| 1448 | Pulser events (100k) were taken at 55 uA |
||
| 1449 | DAQ rate drop below 3.7 only when showersum threshold is set to 30 mV |
||
| 1450 | |||
| 1451 | 4827 TS3: PS3=6: threshold3: 62mV(SC_C) & 70mV(SC_D) & 30V(ShowerSum), rate = 2.5 kHz,9.5M events |
||
| 1452 | Pulser events (100k) were taken at 0-20 uA |
||
| 1453 | |||
| 1454 | 4828 TS3: PS3=6: threshold3: 62mV(SC_C) & 70mV(SC_D) & 70V(ShowerSum), rate = 1.5 kHz,2.4 M events |
||
| 1455 | Pulser events (100k) were taken with no beam |
||
| 1456 | |||
| 1457 | 4829 TS3: PS3=4: threshold3: 62mV(SC_C) & 70mV(SC_D) & 120V(ShowerSum), rate =1.1 kHz, 161k events |
||
| 1458 | Pulser events (100k) were taken at 60 uA |
||
| 1459 | |||
| 1460 | 4830 TS3: PS3=3: threshold3: 62mV(SC_C) & 70mV(SC_D) & 120V(ShowerSum), rate =1.9 kHz, 2.2M events |
||
| 1461 | Pulser events (100k) were taken as beam was ramping up to 60 uA. Beam has been off for awhile. |
||
| 1462 | Ended the run. Beam is back.... |
||
| 1463 | |||
| 1464 | 4830 TS4: PS4=2: threshold4=230 mV, rate = 3.6 kHz, 143k |
||
| 1465 | |||
| 1466 | 4831 TS4: PS4=2: threshold4=230 mV, rate =1.8 kHz, 3M. Disk is full (I think). CODA error that it needed to reset. |
||
| 1467 | Pulser events (100k) were taken at 60 uA |
||
| 1468 | |||
| 1469 | 4832 TS4, PS4=3, threshold4=230 mV, rate =1.8 kHz, 3.8M. CODA crashed |
||
| 1470 | |||
| 1471 | 4833-4834 SSP error, could not start CODA |
||
| 1472 | |||
| 1473 | ==use hallc_fadc config, no GEM== |
||
| 1474 | 4835 pedestal, no beam, HVs on |
||
| 1475 | |||
| 1476 | 4836 TS3: PS3=6: threshold3: 31mV(SC_C) & 35mV(SC_D) & 120mV(ShowerSum), rate =0.5kHz, 305k events |
||
| 1477 | Pulser events (100k) were taken at no beam. |
||
| 1478 | |||
| 1479 | 4837 TS3: PS3=6: threshold3: 31mV(SC_C) & 35mV(SC_D) & 50mV(ShowerSum), rate =2.0kHz, 213k events |
||
| 1480 | Pulser events (100k) were taken at 50uA. |
||
| 1481 | |||
| 1482 | 4838 TS3, TS4: PS3=4,PS4=0: rate=8.8kHz @ 50uA, 13.05M events |
||
| 1483 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 50mV(ShowerSum),-->TS3_rate =8.2kHz, |
||
| 1484 | threshold4: 350mV(ShowerSum) -->TS4_rate=700Hz |
||
| 1485 | Pulser events (100k) were taken at 50uA. |
||
| 1486 | |||
| 1487 | 4839 TS3, TS4: PS3=4,PS4=0: rate=5.6kHz @ 45uA, 7.75M events |
||
| 1488 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 50mV(ShowerSum),-->TS3_rate =4.7kHz, |
||
| 1489 | threshold4: 280mV(ShowerSum) -->TS4_rate=900Hz |
||
| 1490 | Pulser events (100k) were taken at beam ramping up. |
||
| 1491 | |||
| 1492 | 4840-4845 junk, debug GEM |
||
| 1493 | |||
| 1494 | 4846 TS3,PS3=0: rate=12.8kHz @ 45uA, 871k events, daq saturated |
||
| 1495 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 50mV(ShowerSum) |
||
| 1496 | |||
| 1497 | 4847 TS3,PS3=0: rate=200Hz @ 45uA, 104k events, |
||
| 1498 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 50mV(ShowerSum), |
||
| 1499 | |||
| 1500 | 4848 TS3,PS3=0: rate=200Hz @ 45uA, 122k events, |
||
| 1501 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 50mV(ShowerSum) |
||
| 1502 | |||
| 1503 | 4849 TS3, TS4: PS3=4,PS4=0: rate=2.0kHz @ 45uA, 162k events, |
||
| 1504 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 50mV(ShowerSum), |
||
| 1505 | threshold4: 280mV(ShowerSum), enabled at 140k |
||
| 1506 | |||
| 1507 | 4850 TS3, TS4: PS3=5,PS4=0: rate=7.5kHz @ 50uA, 7.0M events |
||
| 1508 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 40mV(ShowerSum),-->TS3_rate=5.7kHz, |
||
| 1509 | threshold4: 280mV(ShowerSum) -->TS4_rate=1.8kHz |
||
| 1510 | |||
| 1511 | 4851 TS1,TS3,TS4: PS1=5,PS3=5,PS4=0: rate=10.5kHz @ 50uA, 20.3M events |
||
| 1512 | threshold1: 25mV(CerSum) & 70mV(ShowerSum),-->TS1_rate=3.0kHz, |
||
| 1513 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 40mV(ShowerSum),-->TS3_rate=5.7kHz, |
||
| 1514 | threshold4: 280mV(ShowerSum) -->TS4_rate=1.8kHz |
||
| 1515 | |||
| 1516 | 4852 TS1,TS3,TS4: PS1=5,PS3=5,PS4=0: rate=10.4kHz @ 50uA, 20.7M events |
||
| 1517 | threshold1: 25mV(CerSum) & 70mV(ShowerSum),-->TS1_rate=3.0kHz, |
||
| 1518 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 35mV(ShowerSum),-->TS3_rate=6.7kHz, |
||
| 1519 | threshold4: 350mV(ShowerSum) -->TS4_rate=0.7kHz |
||
| 1520 | |||
| 1521 | 4853 TS3: PS3=5: threshold3: 31mV(SC_C) & 35mV(SC_D) & 30mV(ShowerSum), rate=8.1kHz, 450k events |
||
| 1522 | |||
| 1523 | 4854 TS1,TS3,TS4: PS1=6,PS3=5,PS4=0: rate=10.4kHz @ 50uA, 21.3M events |
||
| 1524 | threshold1: 25mV(CerSum) & 70mV(ShowerSum),-->TS1_rate=1.6kHz, |
||
| 1525 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 30mV(ShowerSum),-->TS3_rate=8.1kHz, |
||
| 1526 | threshold4: 350mV(ShowerSum) -->TS4_rate=0.7kHz |
||
| 1527 | |||
| 1528 | 4855 TS3,TS4: PS3=5,PS4=0: rate=10.2kHz @ 50uA, 11M events |
||
| 1529 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 25mV(ShowerSum),-->TS3_rate=9.5kHz, |
||
| 1530 | threshold4: 350mV(ShowerSum) -->TS4_rate=0.7kHz |
||
| 1531 | |||
| 1532 | 4856 TS3,TS4: PS3=5,PS4=0: rate=10.2kHz @ 50uA, 15.4M events |
||
| 1533 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 25mV(ShowerSum),-->TS3_rate=9.5kHz, |
||
| 1534 | threshold4: 350mV(ShowerSum) -->TS4_rate=0.7kHz |
||
| 1535 | |||
| 1536 | 4857 TS1,TS3: PS1=6,PS3=6: rate=10.4kHz @ 45uA, 1.37M events |
||
| 1537 | threshold1: 25mV(CerSum) & 70mV(ShowerSum),-->TS1_rate=1.3kHz, |
||
| 1538 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 20mV(ShowerSum),-->TS3_rate=4.3kHz, |
||
| 1539 | |||
| 1540 | 4858 TS1,TS2TS3,TS4: PS1=6,PS2=11,PS3=6,PS4=0: rate=8.1kHz @ 45uA, 39.3M events |
||
| 1541 | threshold1: 25mV(CerSum) & 70mV(ShowerSum),-->TS1_rate=1.3kHz, |
||
| 1542 | threshold2: 35mV(SC_B) & 35mV(SC_D), -->TS2_rate=1.9kHz, |
||
| 1543 | threshold3: 31mV(SC_C) & 35mV(SC_D) & 20mV(ShowerSum),-->TS3_rate=4.3kHz, |
||
| 1544 | threshold4: 280mV(ShowerSum) -->TS4_rate=0.6kHz |
||
| 1545 | |||
| 1546 | --------End of Real Data Runs-------------------- |