Project

General

Profile

Runlist » History » Revision 27

Revision 26 (Jixie Zhang, 01/17/2021 09:30 PM) → Revision 27/80 (Jixie Zhang, 01/17/2021 10:26 PM)

1. Runlist 

 beam hit the edge of top Ecal 
 New HV is: 1260, 1300, 920, 960, 940, 1940, 1780, 2100 

    
 
 Run      
 777    First run - MWPC trigger -  

 783 Preshower channels set to 2V range in FADC, new New HV is: 1260, 1300, 920, 960, 940, 1840, 1680, 2000 
 783 Preshower channels set to 2V range in FADC 

 784 TS1 and TS2 - move detector position so beam is hitting the center of three ECals 

 
 785    
 New HV is: 1160, 1200, 820, 860, 840, 1840, 1680, 2000  

  
 786 TS1 only - beam centered on calorimeter 

 787 lower HV on preshower, New HV is: 1260, 1300, 820, 860, 840, 1740, 1580, 1900 
 787 lower HV on preshower 

 788 

 792 

 793 reduce 100 V more on preshower, New HV is: 1260, 1300, 820, 860, 840, 1640, 1480, 1800 
 preshower 

 793 short run PEB1 crashed 

 795 switch to FADC only config TiIntelvmeha8 and use 

 795  

 Changing down stream Cerenkov N2 pressure 

 ===========good data start from here=================== 

 796 move to Top block  
 New HV: 1260, 1300, 880, 920, 940, 1640, 1440, 1800 
 797 

 798 move to left block 

  


 800 beam on the center of the top block, point A 
 801 
 802 beam on the center of the right block, point C 

 803 beam on the center of the left block, point A 

 804 beam on the center of 3 modules, 6.5k 

 805 2GeV, beam on the center of 3 modules, 31.7k 

 806 4GeV, beam on the center of 3 modules, 

 818 12 GeV e-  
 819 12 GeV e-  
 820 10 GeV e-  
 821 8 GeV e- 
 822 6 GeV e-  

 ===========1GeV=================== 
 HV is: 1260, 1280, 760, 860, 880, 1640, 1480, 1800 
 823 
 824 
 825 
 Switch to TS2 trigger 

 828  

 Switch back to TS1 

 831  

 839    daq crashed 

 847 1 GeV 
 ===========6GeV=================== 

 848 6 GeV 
 849 6 GeV 
 850 6 GeV 
 851 6 GeV 

 858 bad run 

 ===========16GeV=================== 
 862, ecal HV is using 8GeV setting: 760, 860, 880        bad run, all saturated 
 863, change ecal HV: 720, 820. 840, bad run, all saturated 
 864     bad run, all saturated 
 865, change ecal HV: 700 780,800    bad run, sdu#5 saturated 
 866 bad run, sdu#5 saturated 
 ===========12GeV=================== 
 867 
 868 
 869 
 
 870 motion table moved to (1429,315) 
 871 

 872 motion table moved to (1452,315) 
 873 
 874 

 875 motion table moved to (1461,315) 
 876 

 877 motion table moved to (1451,315)