Test stand DAQ » History » Revision 16
Revision 15 (David Flay, 01/14/2021 11:36 PM) → Revision 16/17 (David Flay, 01/14/2021 11:36 PM)
h1. [[Run list]] h1. [[Run [Run Plan and Projected Event Rates]] h1. [[Linux/macOS VNC Instructions]] h1. Test stand DAQ VME CPU intelvmeha8 ROC2 ROC ID : 4 DAQ computer clrlpc HV on /dev/ttyUSB2 VME crate on /dev/ttyUSB1 type CAEN to accesss the crate to access use minicom, if you need to setup the port for /dev/ttyUSB1 or USB2 do : minicom -s and change serial settings ( should be 9600 8 N 1 ) DAQ on VNC :1 Log on clrlpc , type tcsh To start CODA type : startcoda choose config TIintelvmeha8 and start run Online diagnostic : cd DiagGUI/fe_diaggui/ ./DiagGUI intelvmeha8.txt To look at data : cd companaEcal ./compana give run number root file goes in /home/a-compton/companaEcal/Rootfiles Few root command to display waveforms : i=0; T->Draw("fadc_slot7:Iteration$","","L",1,i++); To change latency of fadc: 1) go to clrlpc:/home/coda/3.10/linuxvme/fadc-HallB/rol 2) modify fadc_list.C 3) ssh a-compton@intelvmeha8; cd /home/coda/3.10/linuxvme/fadc-HallB/rol; make 4) restart coda