Actions
January 8th 2026
- Updates ESB
- Network pulled and put switch should have network 196
- GEM
- booted MPD crate
- tried to boot VTP crate, issue with controller
- Ching can pull out extension cable from SBS, can give extension
- 2 payload boars for up to 8 MPDs
- 9 MPDs in crate
- can setup SBS backplane with one or a few APVs to take pedestals and test software
- Zhiwen gave github to previous GEM software, need to discuss and figure out what decoders are needed
- VMM : use ethernet readout and might use long cables as back up for supply
- need to check for power supply for VMM, need to check if we can use electronics group one or use the MPOD.
- Harsh getting started with VMM readout
- 30 m HDMI found if needed : need to check how many - 10 m x 20
- ECal
- Zhongling moved boards to crate, just need to hook up network and boot the crate
- he will move the computer to the test area
**MRPC
- moved cables on table near other racks
- Sanghwa started installing software for NALU chips on laptop
- HV
- need to get some up and controls
- Lecroy
- MPOD bring crate and set up - start with web interface
- CAEN crate
- controls EPICS
- Network pulled and put switch should have network 196
- GEM
- booted MPD crate
- tried to boot VTP crate, issue with controller
- Ching can pull out extension cable from SBS, can give extension
- 2 payload boars for up to 8 MPDs
- 9 MPDs in crate
- can setup SBS backplane with one or a few APVs to take pedestals and test software
- Zhiwen gave github to previous GEM software, need to discuss and figure out what decoders are needed
- VMM : use ethernet readout and might use long cables as back up for supply
- need to check for power supply for VMM, need to check if we can use electronics group one or use the MPOD.
- Harsh getting started with VMM readout
- 30 m HDMI found if needed : need to check how many - 10 m x 20
- ECal
- Zhongling moved boards to crate, just need to hook up network and boot the crate
- he will move the computer to the test area
**MRPC - moved cables on table near other racks
- Sanghwa started installing software for NALU chips on laptop
- HV
- need to get some up and controls
- Lecroy
- MPOD bring crate and set up - start with web interface
- CAEN crate
- controls EPICS
- To do list :
- network
- check with network people if we can have dedicated fiber
**check in Hall : electronics rack location and network connection
- check with network people if we can have dedicated fiber
- network
- ECal electronics for Zhihong
- FADC, SD, TI , VTP, old VME CPU - need to check all working before shipping
- CAEN controller : will try to run with CODA
- Test stand detector group
- will meet detector group at 2 :30 to setup FADC for PMTs LED tests
- add to new GEM chip paper
Updated by Alexandre Camsonne 4 days ago · 3 revisions