Data replay » History » Version 16
Chao Peng, 07/30/2020 10:54 AM
1 | 6 | Chao Peng | h1. Data replay on clrlpc |
---|---|---|---|
2 | 1 | Mark Jones | |
3 | 14 | Chao Peng | # Login to clrlpc (a-compton@clrlpc) |
4 | # Type the following commands |
||
5 | 8 | Chao Peng | |
6 | 1 | Mark Jones | <pre> |
7 | 9 | Chao Peng | cd ~/fadc_decoder |
8 | 1 | Mark Jones | source env/set_env.csh |
9 | ./bin/esb_analyze <raw_data.evio> <output.root> |
||
10 | 4 | Sylvester Joosten | </pre> |
11 | 1 | Mark Jones | |
12 | 9 | Chao Peng | Note that: |
13 | 10 | Chao Peng | * The map file is at config/esb_module.conf |
14 | 1 | Mark Jones | * It works for both mode 1 and mode 3 raw data |
15 | |||
16 | 7 | Chao Peng | |
17 | 1 | Mark Jones | h1. Online Monitor on cdaql1 |
18 | |||
19 | 14 | Chao Peng | # Login under cdaq@cdaql1 |
20 | # Type the following commands |
||
21 | 11 | Chao Peng | |
22 | 14 | Chao Peng | <pre> |
23 | go_analysis pro |
||
24 | cd ~/solid/fadc_decoder |
||
25 | source env/set_env.sh |
||
26 | </pre> |
||
27 | 11 | Chao Peng | |
28 | 14 | Chao Peng | Now check the configuration file "config/online_monitor.conf" |
29 | Correct the host, port, etfile if they are not consistent with the current DAQ system. |
||
30 | Continue with the command: |
||
31 | 7 | Chao Peng | |
32 | <pre> |
||
33 | 14 | Chao Peng | root -b -q online/monitor.cxx+ |
34 | 7 | Chao Peng | </pre> |
35 | 1 | Mark Jones | |
36 | 16 | Chao Peng | Open a web browser, and the monitor is ready at cdaql1.jlab.org/online/solid |
37 | 1 | Mark Jones |