Project

General

Profile

ESB DAQ » History » Version 14

Simona Malace, 08/30/2020 01:03 PM

1 2 Alexandre Camsonne
1. ESB DAQ
2 1 Alexandre Camsonne
3
Computers
4
5
simonadaq
6
7 3 Alexandre Camsonne
clrlpc 
8 1 Alexandre Camsonne
9
CPU : solidesbdaq
10
11 2 Alexandre Camsonne
VTP : esbvtp 129.57.36.253
12 1 Alexandre Camsonne
13 2 Alexandre Camsonne
VXS crate : esbvxs
14 4 Mark Jones
15
16
2. FADC cabling
17
18 13 Simona Malace
Slot 3  : Chan 0-7  : Cer14-5,13-4,13-3,13-2,13-1,13-5,12-4,12-3
19
Slot 3  : Chan 8-15  : Cer12-2,12-1,12-5,11-4,11-3,11-2,11-1,11-5   
20 9 Mark Jones
21
Slot 4  : Chan 0-7  : Cer 33-1,33-5,23-4,23-3,23-2,23-1,23-5,24-4
22
Slot 4  : Chan 8-15  : Cer 24-3,24-2,24-1,24-5,14-4,14-3,14-2,14-1
23
24
Slot 5  : Chan 0-7  : Cer 43-2,43-1,43-5,44-4,44-3,44-2,44-1,44-5 
25
Slot 5  : Chan 8-15 :  Cer 34-4,34-3,34-2,34-1,34-5,33-4,33-3,33-2
26
27
Slot 6  : Chan 0-7  : Cer 31-3,31-2,31-1,31-5,41-4,41-3,41-2,41-1
28
Slot 6  : Chan 8-15  : Cer 41-5,42-4,42,-3,42-2,42-1,42-5,43-4,43-3
29
30 4 Mark Jones
Slot 7  : Chan 0-7  : C7-4,C7-3,C7-2,C7-1,C6-4,C6-3,C6-2,C6-1
31
Slot 7  : Chan 8-15 : C5-4,C5-3,C5-2,C5-1,C4,C3,C2,C1
32 1 Alexandre Camsonne
33 9 Mark Jones
Slot 8  : Chan 0-7  : Cer 22-1,22-5,32-4,32-3,32-2,32-1,32-5,31-4
34 1 Alexandre Camsonne
Slot 8  : Chan 8-15 : C9-4,C9-3,C9-2,C9-1,C8-4,C8-3,C8-2,C8-1
35 4 Mark Jones
36 9 Mark Jones
Slot 9  : Chan 0-7  : empty,empty,cer21-4,21-3,21-2,21-1,21-4,22-4
37
slot 9  : Chan 8-15 : Cer22-3,Cer22-2,S2-11,S2-10,S2-9,S2-8,S2-7,S2-6
38 4 Mark Jones
39 1 Alexandre Camsonne
Slot 10 : Chan 0-7  : S2-5,S2-4,S2-3,S2-2,S2-1,S1-11,S1-10,S1-9
40
Slot 10 : Chan 8-15 : S1-8,S1-7,S1-6,S1-5,S1-4,S1-3,S1-2,S1-1
41 13 Simona Malace
42
43 14 Simona Malace
44
45 13 Simona Malace
3. FADC cabling with the LAPPD box
46
47
Slot 3  : Chan 0-7  : LAPPD-B8, LAPPD-B7, LAPPD-B6, LAPPD-B5, LAPPD-B4, LAPPD-B3, LAPPD-B2, LAPPD-B1
48
Slot 3  : Chan 8-15  : LAPPD-A8, LAPPD-A7, LAPPD-A6, LAPPD-A5, LAPPD-A4, LAPPD-A3, LAPPD-A2, LAPPD-A1  
49 14 Simona Malace
50
51
Slot 4  : Chan 0-7  : LAPPD-D8, LAPPD-D7, LAPPD-D6, LAPPD-D5, LAPPD-D4, LAPPD-D3, LAPPD-D2, LAPPD-D1
52
Slot 4  : Chan 8-15  : LAPPD-C8, LAPPD-C7, LAPPD-C6, LAPPD-C5, LAPPD-C4, LAPPD-C3, LAPPD-C2, LAPPD-C1
53
54
55 5 Alexandre Camsonne
56 1 Alexandre Camsonne
------------
57
58 6 Ben Raydo
To start coda:
59
* VNC server should be running on clrlpc:1
60
* To connect: vncviewer clrlpc:1 (account/password is a-compton)
61
* Open terminal, run: kcoda, then startcoda
62 10 Stephen Wood
* Configuration is vtpOnly (To include FADC scalers use vtpScalers)
63 6 Ben Raydo
64
------------
65
66
Readout/trigger configuration files:
67
* FADC: clrlpc:/home/a-compton/params/fadc250/solidcer.cnf
68
* VTP:  clrlpc:/home/a-compton/params/vtp/esbvtp.cnf
69 7 Alexandre Camsonne
70
------------
71
FADC250 Pedestal measurement program:
72 11 Simona Malace
export EXPID=solidcer
73 7 Alexandre Camsonne
a-compton@solidesbdaq
74
/home/a-compton/src/linuxvme/fadc-HallB/test
75
./fadc250peds result.txt
76 8 Alexandre Camsonne
77
78
-----------
79
VTP environment variables in ESB :
80
81
Zynq> printenv
82
autoload=no
83
baudrate=115200
84
bootargs=console=ttyPS0,115200 ip=::::esbvtp:eth0:dhcp nfsroot=129.57.37.107:/diskless/diskless/ArchLinux/armv7-devel/root uio_pdrv_genirq.of_id=my-uio ro rootwait cma=384MB
85
bootargs_rw=console=ttyPS0,115200 ip=::::esbvtp:eth0:dhcp nfsroot=129.57.37.107:/diskless/diskless/ArchLinux/armv7-devel/root uio_pdrv_genirq.of_id=my-uio rw rootwait cma=384MB
86
bootcmd=run $modeboot
87
bootdelay=3
88
devicetree_image=devicetree.dtb
89
devicetree_load_address=0x2000000
90
ethact=ethernet@e000b000
91
ethaddr=ce:ba:f0:03:00:a0
92
fdt_high=0x20000000
93
fdtcontroladdr=3ffa9e30
94
gatewayip=129.57.168.1
95
initrd_high=0x20000000
96
ipaddr=129.57.168.23
97
kernel_image=uImage
98
kernel_load_address=0x2080000
99
kernel_path=linux-install/ArchLinux-armv71
100
modeboot=sdboot
101
netmask=255.255.255.0
102
sdboot=echo Copying Linux from TFTP server to RAM...; echo Download Kernel; if tftpboot ${kernel_load_address} ${kernel_path}/${kernel_image}; then echo OK; else echo FAILED; reset; fi; echo Download DeviceTree; if tftpbo}
103
sdboot_no=if mmcinfo; then echo Copying Linux from SD to RAM... && load mmc 0 ${kernel_load_address} ${kernel_image} && load mmc 0 ${devicetree_load_address} ${devicetree_image} && bootm ${kernel_load_address} - ${deviceti
104
serverip=129.57.37.107
105
stderr=serial@e0000000
106
stdin=serial@e0000000
107
stdout=serial@e0000000
108
tftpboot_no=echo Copying Linux from tftp server to RAM... &&tftpboot ${kernel_load_address} linux_vtp/${kernel_image} &&tftpboot ${devicetree_load_address} linux_vtp/${devicetree_image} &&bootm ${kernel_load_address} - ${;
109
110
Environment size: 1814/131068 bytes
111 12 Stephen Wood
112
3. Flash ADC scalers
113
114
The FADC250 modules have internal scalers.  These scalers can be read both during data taking, or when a CODA run is not in progress.  Scaler server software has been installed on solidesbdaq so that the scalers can be included in the data stream, read by the getscalers command or displayed with xscalers.
115
116
To start the scaler server, type "startscalerserver".  To stop the scaler server, type "killscalerserver".  These commands can be run on clrlpc or solidesbdaq.
117
118
To get a text dump of the scalers, run "getscalers solidesbdaq" from clrlpc or the cdaq account on a Hall C machine.  The last line of the output is a counter running at 60 Hz which can be used as a time base to calculate rates.
119
120
The command "go_xscaler" will bring up an Xscaler display of the FADC scalers.  The mapfile is in /home/a-compton/saw/xscaler/scaler.map on clrlpc.
121
122
To include scalers in the data stream, use the vtpScalers configuration instead of vtpOnly.