Project

General

Profile

ESB DAQ » History » Version 16

Simona Malace, 08/30/2020 01:30 PM

1 2 Alexandre Camsonne
1. ESB DAQ
2 1 Alexandre Camsonne
3
Computers
4
5
simonadaq
6
7 3 Alexandre Camsonne
clrlpc 
8 1 Alexandre Camsonne
9
CPU : solidesbdaq
10
11 2 Alexandre Camsonne
VTP : esbvtp 129.57.36.253
12 1 Alexandre Camsonne
13 2 Alexandre Camsonne
VXS crate : esbvxs
14 4 Mark Jones
15
16
2. FADC cabling
17
18 13 Simona Malace
Slot 3  : Chan 0-7  : Cer14-5,13-4,13-3,13-2,13-1,13-5,12-4,12-3
19
Slot 3  : Chan 8-15  : Cer12-2,12-1,12-5,11-4,11-3,11-2,11-1,11-5   
20 9 Mark Jones
21
Slot 4  : Chan 0-7  : Cer 33-1,33-5,23-4,23-3,23-2,23-1,23-5,24-4
22
Slot 4  : Chan 8-15  : Cer 24-3,24-2,24-1,24-5,14-4,14-3,14-2,14-1
23
24
Slot 5  : Chan 0-7  : Cer 43-2,43-1,43-5,44-4,44-3,44-2,44-1,44-5 
25
Slot 5  : Chan 8-15 :  Cer 34-4,34-3,34-2,34-1,34-5,33-4,33-3,33-2
26
27
Slot 6  : Chan 0-7  : Cer 31-3,31-2,31-1,31-5,41-4,41-3,41-2,41-1
28
Slot 6  : Chan 8-15  : Cer 41-5,42-4,42,-3,42-2,42-1,42-5,43-4,43-3
29
30 4 Mark Jones
Slot 7  : Chan 0-7  : C7-4,C7-3,C7-2,C7-1,C6-4,C6-3,C6-2,C6-1
31
Slot 7  : Chan 8-15 : C5-4,C5-3,C5-2,C5-1,C4,C3,C2,C1
32 1 Alexandre Camsonne
33 9 Mark Jones
Slot 8  : Chan 0-7  : Cer 22-1,22-5,32-4,32-3,32-2,32-1,32-5,31-4
34 1 Alexandre Camsonne
Slot 8  : Chan 8-15 : C9-4,C9-3,C9-2,C9-1,C8-4,C8-3,C8-2,C8-1
35 4 Mark Jones
36 9 Mark Jones
Slot 9  : Chan 0-7  : empty,empty,cer21-4,21-3,21-2,21-1,21-4,22-4
37
slot 9  : Chan 8-15 : Cer22-3,Cer22-2,S2-11,S2-10,S2-9,S2-8,S2-7,S2-6
38 4 Mark Jones
39 1 Alexandre Camsonne
Slot 10 : Chan 0-7  : S2-5,S2-4,S2-3,S2-2,S2-1,S1-11,S1-10,S1-9
40
Slot 10 : Chan 8-15 : S1-8,S1-7,S1-6,S1-5,S1-4,S1-3,S1-2,S1-1
41 13 Simona Malace
42
43 14 Simona Malace
44
45 13 Simona Malace
3. FADC cabling with the LAPPD box
46
47
Slot 3  : Chan 0-7  : LAPPD-B8, LAPPD-B7, LAPPD-B6, LAPPD-B5, LAPPD-B4, LAPPD-B3, LAPPD-B2, LAPPD-B1
48
Slot 3  : Chan 8-15  : LAPPD-A8, LAPPD-A7, LAPPD-A6, LAPPD-A5, LAPPD-A4, LAPPD-A3, LAPPD-A2, LAPPD-A1  
49 14 Simona Malace
50
51
Slot 4  : Chan 0-7  : LAPPD-D8, LAPPD-D7, LAPPD-D6, LAPPD-D5, LAPPD-D4, LAPPD-D3, LAPPD-D2, LAPPD-D1
52
Slot 4  : Chan 8-15  : LAPPD-C8, LAPPD-C7, LAPPD-C6, LAPPD-C5, LAPPD-C4, LAPPD-C3, LAPPD-C2, LAPPD-C1
53
54
55 15 Simona Malace
Slot 5  : Chan 0-7  : LAPPD-F8, LAPPD-F7, LAPPD-F6, LAPPD-F5, LAPPD-F4, LAPPD-F3, LAPPD-F2, LAPPD-F1 
56
Slot 5  : Chan 8-15 : LAPPD-E8, LAPPD-E7, LAPPD-E6, LAPPD-E5, LAPPD-E4, LAPPD-E3, LAPPD-E2, LAPPD-E1
57
58
59 16 Simona Malace
Slot 6  : Chan 0-7  : LAPPD-H8, LAPPD-H7, LAPPD-H6, LAPPD-H5, LAPPD-H4, LAPPD-H3, LAPPD-H2, LAPPD-H1
60
Slot 6  : Chan 8-15 : LAPPD-G8, LAPPD-G7, LAPPD-G6, LAPPD-G5, LAPPD-G4, LAPPD-G3, LAPPD-G2, LAPPD-G1
61 5 Alexandre Camsonne
62 1 Alexandre Camsonne
------------
63
64 6 Ben Raydo
To start coda:
65
* VNC server should be running on clrlpc:1
66
* To connect: vncviewer clrlpc:1 (account/password is a-compton)
67
* Open terminal, run: kcoda, then startcoda
68 10 Stephen Wood
* Configuration is vtpOnly (To include FADC scalers use vtpScalers)
69 6 Ben Raydo
70
------------
71
72
Readout/trigger configuration files:
73
* FADC: clrlpc:/home/a-compton/params/fadc250/solidcer.cnf
74
* VTP:  clrlpc:/home/a-compton/params/vtp/esbvtp.cnf
75 7 Alexandre Camsonne
76
------------
77
FADC250 Pedestal measurement program:
78 11 Simona Malace
export EXPID=solidcer
79 7 Alexandre Camsonne
a-compton@solidesbdaq
80
/home/a-compton/src/linuxvme/fadc-HallB/test
81
./fadc250peds result.txt
82 8 Alexandre Camsonne
83
84
-----------
85
VTP environment variables in ESB :
86
87
Zynq> printenv
88
autoload=no
89
baudrate=115200
90
bootargs=console=ttyPS0,115200 ip=::::esbvtp:eth0:dhcp nfsroot=129.57.37.107:/diskless/diskless/ArchLinux/armv7-devel/root uio_pdrv_genirq.of_id=my-uio ro rootwait cma=384MB
91
bootargs_rw=console=ttyPS0,115200 ip=::::esbvtp:eth0:dhcp nfsroot=129.57.37.107:/diskless/diskless/ArchLinux/armv7-devel/root uio_pdrv_genirq.of_id=my-uio rw rootwait cma=384MB
92
bootcmd=run $modeboot
93
bootdelay=3
94
devicetree_image=devicetree.dtb
95
devicetree_load_address=0x2000000
96
ethact=ethernet@e000b000
97
ethaddr=ce:ba:f0:03:00:a0
98
fdt_high=0x20000000
99
fdtcontroladdr=3ffa9e30
100
gatewayip=129.57.168.1
101
initrd_high=0x20000000
102
ipaddr=129.57.168.23
103
kernel_image=uImage
104
kernel_load_address=0x2080000
105
kernel_path=linux-install/ArchLinux-armv71
106
modeboot=sdboot
107
netmask=255.255.255.0
108
sdboot=echo Copying Linux from TFTP server to RAM...; echo Download Kernel; if tftpboot ${kernel_load_address} ${kernel_path}/${kernel_image}; then echo OK; else echo FAILED; reset; fi; echo Download DeviceTree; if tftpbo}
109
sdboot_no=if mmcinfo; then echo Copying Linux from SD to RAM... && load mmc 0 ${kernel_load_address} ${kernel_image} && load mmc 0 ${devicetree_load_address} ${devicetree_image} && bootm ${kernel_load_address} - ${deviceti
110
serverip=129.57.37.107
111
stderr=serial@e0000000
112
stdin=serial@e0000000
113
stdout=serial@e0000000
114
tftpboot_no=echo Copying Linux from tftp server to RAM... &&tftpboot ${kernel_load_address} linux_vtp/${kernel_image} &&tftpboot ${devicetree_load_address} linux_vtp/${devicetree_image} &&bootm ${kernel_load_address} - ${;
115
116
Environment size: 1814/131068 bytes
117 12 Stephen Wood
118
3. Flash ADC scalers
119
120
The FADC250 modules have internal scalers.  These scalers can be read both during data taking, or when a CODA run is not in progress.  Scaler server software has been installed on solidesbdaq so that the scalers can be included in the data stream, read by the getscalers command or displayed with xscalers.
121
122
To start the scaler server, type "startscalerserver".  To stop the scaler server, type "killscalerserver".  These commands can be run on clrlpc or solidesbdaq.
123
124
To get a text dump of the scalers, run "getscalers solidesbdaq" from clrlpc or the cdaq account on a Hall C machine.  The last line of the output is a counter running at 60 Hz which can be used as a time base to calculate rates.
125
126
The command "go_xscaler" will bring up an Xscaler display of the FADC scalers.  The mapfile is in /home/a-compton/saw/xscaler/scaler.map on clrlpc.
127
128
To include scalers in the data stream, use the vtpScalers configuration instead of vtpOnly.