Wiki » History » Version 13
Alexandre Camsonne, 03/07/2019 02:19 PM
1 | 1 | Alexandre Camsonne | h1. Wiki |
---|---|---|---|
2 | |||
3 | h1. DAQ |
||
4 | |||
5 | 4 | Alexandre Camsonne | |
6 | h2. Starting CODA |
||
7 | 1 | Alexandre Camsonne | DAQ is running on simonadaq computer in coda account in the vnc session number 1. |
8 | |||
9 | To open VNC, either start VNC from a computer at the counting house through ssh or make a ssh tunnel if you are offsite |
||
10 | |||
11 | Example : |
||
12 | |||
13 | 9 | Alexandre Camsonne | ssh -L5901:locahost:portnumber username@hallgw.jlab.org ( use a port number not in used on hallgw and there are some limitation on the port range I think between 10000 and 30000 should be ok) |
14 | 1 | Alexandre Camsonne | |
15 | after from hallgw |
||
16 | |||
17 | 9 | Alexandre Camsonne | ssh -Lportnumber:localhost:5901 cdaq@simonadaq |
18 | 1 | Alexandre Camsonne | |
19 | then open a vnc locally on your computer : vncviewer -shared localhost:1 ( ask Junqi or Sylvester for the vnc password ) |
||
20 | |||
21 | To start CODA from scratch, login as coda |
||
22 | |||
23 | type startcoda |
||
24 | |||
25 | that will open the CODA windows |
||
26 | |||
27 | 3 | Alexandre Camsonne | If the ROC is not started alread, ssh root@hallcsc-1 and type ./startroc1 |
28 | |||
29 | 2 | Alexandre Camsonne | in Run Control GUI, go to platform and connect. |
30 | 1 | Alexandre Camsonne | |
31 | 2 | Alexandre Camsonne | Then choose the FADC configuration and just start a run. |
32 | 1 | Alexandre Camsonne | |
33 | 2 | Alexandre Camsonne | To change the FADC parameters, |
34 | |||
35 | ssh to hallcsc-1 as root |
||
36 | |||
37 | go to /root/linuxvme/fadc/rol |
||
38 | |||
39 | and edit fadc_list.c |
||
40 | |||
41 | once done compile with : |
||
42 | |||
43 | make fadc_list.so |
||
44 | |||
45 | and redownload in CODA to take the changes into account |
||
46 | 4 | Alexandre Camsonne | |
47 | |||
48 | 7 | Alexandre Camsonne | I saw from time to time error in FADC ROC window about scanmask, usually stopping the run and redownloading fixes the issue. |
49 | |||
50 | h2. Powercycling the crate |
||
51 | |||
52 | telnet 129.57.168.242 2003 |
||
53 | |||
54 | type CAEN |
||
55 | |||
56 | and a menu should appear |
||
57 | |||
58 | C.A.E.N. A8160 VME8100 Crate Controller V1.05 |
||
59 | |||
60 | B O A R D M E N U |
||
61 | |||
62 | Crate PS & Fan Status |
||
63 | General General Status |
||
64 | Update PS Firmware Update |
||
65 | |||
66 | |||
67 | Quit Abandon program |
||
68 | |||
69 | Type C |
||
70 | |||
71 | and then you will see fan status and you can turn the crate on or off with O |
||
72 | |||
73 | 4 | Alexandre Camsonne | h2. Channel Map |
74 | 3 | Alexandre Camsonne | |
75 | |||
76 | 1 | Alexandre Camsonne | |_FADC 1 | detector| |
77 | 11 | Alexandre Camsonne | | 0 | | |
78 | | 1 | | |
||
79 | | 2 | | |
||
80 | | 3 | | |
||
81 | |||
82 | | 4 | | |
||
83 | |||
84 | | 5 | | |
||
85 | |||
86 | | 6 | | |
||
87 | |||
88 | | 7 | | |
||
89 | |||
90 | | 8 | | |
||
91 | |||
92 | | 9 | | |
||
93 | |||
94 | | 10 | | |
||
95 | |||
96 | | 11 | | |
||
97 | |||
98 | | 12 | | |
||
99 | |||
100 | | 13 | | |
||
101 | |||
102 | | 14 | | |
||
103 | 10 | Alexandre Camsonne | |
104 | 12 | Alexandre Camsonne | | 15 | | |
105 | 2 | Alexandre Camsonne | |
106 | 1 | Alexandre Camsonne | h1. FADC data analysis |
107 | |||
108 | 2 | Alexandre Camsonne | |
109 | 1 | Alexandre Camsonne | on cdaq account |
110 | |||
111 | 2 | Alexandre Camsonne | go to /home/cdaq/tlgc/FADC_decode |
112 | |||
113 | and run FADCcom program |
||
114 | |||
115 | you need to copy the CODA file from simonadaq to /net/cdaq/cdaql1data/cdaq/tlgc/data ( from simonadaq : scp fadc_runnumber.dat cdaq@cdaql2:tlgc/data/ ) |
||
116 | |||
117 | |||
118 | if you open the rootfile you will see the different directories corresponding to the channels decoded. |
||
119 | 6 | Mark Jones | |
120 | |||
121 | h1. HV |
||
122 | |||
123 | h2. Access HV crate. |
||
124 | *The HV crate can be remotely accessed through the port server port 2002 to access the port: telnet 129.57.168.242 2002 |
||
125 | *To end a telnet session type:"CTRL-]" then quit |
||
126 | *If someone else is connected to the 2002 if you get : |
||
127 | <pre> |
||
128 | Trying 129.57.168.242... |
||
129 | telnet: connect to address 129.57.168.242: Connection refused |
||
130 | </pre> |
||
131 | |||
132 | *To force a connect you must first kill the 2002 connection by the following steps: |
||
133 | > # telnet 129.57.168.242 ( login: root password:dbps) |
||
134 | > # at "#>" prompt type: kill tty=2 |
||
135 | > # at "#>" prompt type: "CTRL-]" then quit |
||
136 | |||
137 | *press the "U" ( for update) if you see the following: |
||
138 | |||
139 | <pre> |
||
140 | 16:40:40 104% telnet 129.57.168.242 2002 |
||
141 | Trying 129.57.168.242... |
||
142 | Connected to 129.57.168.242. |
||
143 | Escape character is '^]'. |
||
144 | |||
145 | Digi International |
||
146 | PortServer 8 |
||
147 | </pre> |
||
148 | |||
149 | |||
150 | *Press "D" if you see the main menu |
||
151 | <pre> |
||
152 | ************** |
||
153 | M A I N M E N U |
||
154 | |||
155 | Display Display/Modify channels |
||
156 | Protections Set/Reset password |
||
157 | Crate Connect a new crate |
||
158 | Map Crate map |
||
159 | Kill Kill all channels |
||
160 | Alarms Reset alarms |
||
161 | Status Select type of alarm |
||
162 | Format Reformat EEPROM |
||
163 | Quit Abandon program |
||
164 | *********** |
||
165 | </pre> |
||
166 | |||
167 | *You should eventually see (hitting "P" moves to different pages: |
||
168 | <pre> |
||
169 | |||
170 | Channel Vmon Imon HVmax V0set I0set Hv Status Ch# |
||
171 | CHANNEL48 0000.00 0000.00 2321 1700.00 2000.00 Off 48 |
||
172 | CHANNEL49 0000.00 0000.00 2321 1700.00 2000.00 Off 49 |
||
173 | CHANNEL50 0000.00 0000.00 2321 1850.00 2000.00 Off 50 |
||
174 | CHANNEL51 0000.00 0000.00 2321 1700.00 2000.00 Off 51 |
||
175 | CHANNEL52 0000.00 0000.00 2321 1900.00 2000.00 Off 52 |
||
176 | CHANNEL53 0000.00 0000.00 2321 1900.00 2000.00 Off 53 |
||
177 | cerA 0000.00 0000.00 2321 1000.00 2000.00 Off 54 |
||
178 | cerB 0000.00 0000.00 2321 1000.00 2000.00 Off 55 |
||
179 | cerC 0000.00 0000.00 2321 1000.00 2000.00 Off 56 |
||
180 | cerD 0000.00 0000.00 2321 1000.00 2000.00 Off 57 |
||
181 | CHANNEL58 0000.00 0000.00 2321 0000.00 2000.00 Off 58 |
||
182 | CHANNEL59 0000.00 0000.00 2321 1000.00 2000.00 Off 59 |
||
183 | calo2 1653.40 0880.00 2321 1650.00 2000.00 On 60 |
||
184 | calo3 1653.60 0913.00 2321 1650.00 2000.00 On 61 |
||
185 | calo4 1553.20 0849.00 2321 1550.00 2000.00 On 62 |
||
186 | calo5 1453.20 0790.00 2321 1450.00 2000.00 On 63 |
||
187 | |||
188 | or |
||
189 | Channel Vmon Imon HVmax V0set I0set Hv Status Ch# |
||
190 | chan16 0000.00 0000.00 1048 0200.00 1000.00 Off 16 |
||
191 | scinF 0847.80 0213.00 1048 0850.00 1000.00 On 17 |
||
192 | scinB 0847.40 0216.00 1048 0850.00 1000.00 On 18 |
||
193 | CHANNEL19 0000.00 0000.00 1048 0200.00 1000.00 Off 19 |
||
194 | CHANNEL20 0000.00 0000.00 1048 0200.00 1000.00 Off 20 |
||
195 | CHANNEL21 0000.00 0000.00 1048 0200.00 1000.00 Off 21 |
||
196 | CHANNEL22 0000.00 0000.00 1048 0200.00 1000.00 Off 22 |
||
197 | CHANNEL23 0000.00 0000.00 1048 0200.00 1000.00 Off 23 |
||
198 | CHANNEL24 0023.40 0000.00 1048 0200.00 0800.00 Off 24 |
||
199 | CHANNEL25 0000.00 0000.00 1048 0200.00 0800.00 Off 25 |
||
200 | CHANNEL26 0000.00 0000.00 1048 0200.00 0800.00 Off 26 |
||
201 | CHANNEL27 0000.00 0000.00 1048 0200.00 0800.00 Off 27 |
||
202 | CHANNEL28 0000.00 0000.00 1048 0200.00 0800.00 Off 28 |
||
203 | CHANNEL29 0000.00 0000.00 1048 0200.00 0800.00 Off 29 |
||
204 | CHANNEL30 0000.00 0000.00 1048 0200.00 0800.00 Off 30 |
||
205 | CHANNEL31 0000.00 0000.00 1048 0200.00 0800.00 Off 31 |
||
206 | |||
207 | </pre> |