Wiki » History » Version 9
Alexandre Camsonne, 03/07/2019 02:14 PM
| 1 | 1 | Alexandre Camsonne | h1. Wiki |
|---|---|---|---|
| 2 | |||
| 3 | h1. DAQ |
||
| 4 | |||
| 5 | 4 | Alexandre Camsonne | |
| 6 | h2. Starting CODA |
||
| 7 | 1 | Alexandre Camsonne | DAQ is running on simonadaq computer in coda account in the vnc session number 1. |
| 8 | |||
| 9 | To open VNC, either start VNC from a computer at the counting house through ssh or make a ssh tunnel if you are offsite |
||
| 10 | |||
| 11 | Example : |
||
| 12 | |||
| 13 | 9 | Alexandre Camsonne | ssh -L5901:locahost:portnumber username@hallgw.jlab.org ( use a port number not in used on hallgw and there are some limitation on the port range I think between 10000 and 30000 should be ok) |
| 14 | 1 | Alexandre Camsonne | |
| 15 | after from hallgw |
||
| 16 | |||
| 17 | 9 | Alexandre Camsonne | ssh -Lportnumber:localhost:5901 cdaq@simonadaq |
| 18 | 1 | Alexandre Camsonne | |
| 19 | then open a vnc locally on your computer : vncviewer -shared localhost:1 ( ask Junqi or Sylvester for the vnc password ) |
||
| 20 | |||
| 21 | To start CODA from scratch, login as coda |
||
| 22 | |||
| 23 | type startcoda |
||
| 24 | |||
| 25 | that will open the CODA windows |
||
| 26 | |||
| 27 | 3 | Alexandre Camsonne | If the ROC is not started alread, ssh root@hallcsc-1 and type ./startroc1 |
| 28 | |||
| 29 | 2 | Alexandre Camsonne | in Run Control GUI, go to platform and connect. |
| 30 | 1 | Alexandre Camsonne | |
| 31 | 2 | Alexandre Camsonne | Then choose the FADC configuration and just start a run. |
| 32 | 1 | Alexandre Camsonne | |
| 33 | 2 | Alexandre Camsonne | To change the FADC parameters, |
| 34 | |||
| 35 | ssh to hallcsc-1 as root |
||
| 36 | |||
| 37 | go to /root/linuxvme/fadc/rol |
||
| 38 | |||
| 39 | and edit fadc_list.c |
||
| 40 | |||
| 41 | once done compile with : |
||
| 42 | |||
| 43 | make fadc_list.so |
||
| 44 | |||
| 45 | and redownload in CODA to take the changes into account |
||
| 46 | 4 | Alexandre Camsonne | |
| 47 | |||
| 48 | 7 | Alexandre Camsonne | I saw from time to time error in FADC ROC window about scanmask, usually stopping the run and redownloading fixes the issue. |
| 49 | |||
| 50 | h2. Powercycling the crate |
||
| 51 | |||
| 52 | telnet 129.57.168.242 2003 |
||
| 53 | |||
| 54 | type CAEN |
||
| 55 | |||
| 56 | and a menu should appear |
||
| 57 | |||
| 58 | C.A.E.N. A8160 VME8100 Crate Controller V1.05 |
||
| 59 | |||
| 60 | B O A R D M E N U |
||
| 61 | |||
| 62 | Crate PS & Fan Status |
||
| 63 | General General Status |
||
| 64 | Update PS Firmware Update |
||
| 65 | |||
| 66 | |||
| 67 | Quit Abandon program |
||
| 68 | |||
| 69 | Type C |
||
| 70 | |||
| 71 | and then you will see fan status and you can turn the crate on or off with O |
||
| 72 | |||
| 73 | |||
| 74 | |||
| 75 | 4 | Alexandre Camsonne | h2. Channel Map |
| 76 | 3 | Alexandre Camsonne | |
| 77 | |||
| 78 | 1 | Alexandre Camsonne | |
| 79 | 7 | Alexandre Camsonne | |
| 80 | 2 | Alexandre Camsonne | |
| 81 | 1 | Alexandre Camsonne | h1. FADC data analysis |
| 82 | |||
| 83 | 2 | Alexandre Camsonne | |
| 84 | 1 | Alexandre Camsonne | on cdaq account |
| 85 | |||
| 86 | 2 | Alexandre Camsonne | go to /home/cdaq/tlgc/FADC_decode |
| 87 | |||
| 88 | and run FADCcom program |
||
| 89 | |||
| 90 | you need to copy the CODA file from simonadaq to /net/cdaq/cdaql1data/cdaq/tlgc/data ( from simonadaq : scp fadc_runnumber.dat cdaq@cdaql2:tlgc/data/ ) |
||
| 91 | |||
| 92 | |||
| 93 | if you open the rootfile you will see the different directories corresponding to the channels decoded. |
||
| 94 | 6 | Mark Jones | |
| 95 | |||
| 96 | h1. HV |
||
| 97 | |||
| 98 | h2. Access HV crate. |
||
| 99 | *The HV crate can be remotely accessed through the port server port 2002 to access the port: telnet 129.57.168.242 2002 |
||
| 100 | *To end a telnet session type:"CTRL-]" then quit |
||
| 101 | *If someone else is connected to the 2002 if you get : |
||
| 102 | <pre> |
||
| 103 | Trying 129.57.168.242... |
||
| 104 | telnet: connect to address 129.57.168.242: Connection refused |
||
| 105 | </pre> |
||
| 106 | |||
| 107 | *To force a connect you must first kill the 2002 connection by the following steps: |
||
| 108 | > # telnet 129.57.168.242 ( login: root password:dbps) |
||
| 109 | > # at "#>" prompt type: kill tty=2 |
||
| 110 | > # at "#>" prompt type: "CTRL-]" then quit |
||
| 111 | |||
| 112 | *press the "U" ( for update) if you see the following: |
||
| 113 | |||
| 114 | <pre> |
||
| 115 | 16:40:40 104% telnet 129.57.168.242 2002 |
||
| 116 | Trying 129.57.168.242... |
||
| 117 | Connected to 129.57.168.242. |
||
| 118 | Escape character is '^]'. |
||
| 119 | |||
| 120 | Digi International |
||
| 121 | PortServer 8 |
||
| 122 | </pre> |
||
| 123 | |||
| 124 | |||
| 125 | *Press "D" if you see the main menu |
||
| 126 | <pre> |
||
| 127 | ************** |
||
| 128 | M A I N M E N U |
||
| 129 | |||
| 130 | Display Display/Modify channels |
||
| 131 | Protections Set/Reset password |
||
| 132 | Crate Connect a new crate |
||
| 133 | Map Crate map |
||
| 134 | Kill Kill all channels |
||
| 135 | Alarms Reset alarms |
||
| 136 | Status Select type of alarm |
||
| 137 | Format Reformat EEPROM |
||
| 138 | Quit Abandon program |
||
| 139 | *********** |
||
| 140 | </pre> |
||
| 141 | |||
| 142 | *You should eventually see (hitting "P" moves to different pages: |
||
| 143 | <pre> |
||
| 144 | |||
| 145 | Channel Vmon Imon HVmax V0set I0set Hv Status Ch# |
||
| 146 | CHANNEL48 0000.00 0000.00 2321 1700.00 2000.00 Off 48 |
||
| 147 | CHANNEL49 0000.00 0000.00 2321 1700.00 2000.00 Off 49 |
||
| 148 | CHANNEL50 0000.00 0000.00 2321 1850.00 2000.00 Off 50 |
||
| 149 | CHANNEL51 0000.00 0000.00 2321 1700.00 2000.00 Off 51 |
||
| 150 | CHANNEL52 0000.00 0000.00 2321 1900.00 2000.00 Off 52 |
||
| 151 | CHANNEL53 0000.00 0000.00 2321 1900.00 2000.00 Off 53 |
||
| 152 | cerA 0000.00 0000.00 2321 1000.00 2000.00 Off 54 |
||
| 153 | cerB 0000.00 0000.00 2321 1000.00 2000.00 Off 55 |
||
| 154 | cerC 0000.00 0000.00 2321 1000.00 2000.00 Off 56 |
||
| 155 | cerD 0000.00 0000.00 2321 1000.00 2000.00 Off 57 |
||
| 156 | CHANNEL58 0000.00 0000.00 2321 0000.00 2000.00 Off 58 |
||
| 157 | CHANNEL59 0000.00 0000.00 2321 1000.00 2000.00 Off 59 |
||
| 158 | calo2 1653.40 0880.00 2321 1650.00 2000.00 On 60 |
||
| 159 | calo3 1653.60 0913.00 2321 1650.00 2000.00 On 61 |
||
| 160 | calo4 1553.20 0849.00 2321 1550.00 2000.00 On 62 |
||
| 161 | calo5 1453.20 0790.00 2321 1450.00 2000.00 On 63 |
||
| 162 | |||
| 163 | or |
||
| 164 | Channel Vmon Imon HVmax V0set I0set Hv Status Ch# |
||
| 165 | chan16 0000.00 0000.00 1048 0200.00 1000.00 Off 16 |
||
| 166 | scinF 0847.80 0213.00 1048 0850.00 1000.00 On 17 |
||
| 167 | scinB 0847.40 0216.00 1048 0850.00 1000.00 On 18 |
||
| 168 | CHANNEL19 0000.00 0000.00 1048 0200.00 1000.00 Off 19 |
||
| 169 | CHANNEL20 0000.00 0000.00 1048 0200.00 1000.00 Off 20 |
||
| 170 | CHANNEL21 0000.00 0000.00 1048 0200.00 1000.00 Off 21 |
||
| 171 | CHANNEL22 0000.00 0000.00 1048 0200.00 1000.00 Off 22 |
||
| 172 | CHANNEL23 0000.00 0000.00 1048 0200.00 1000.00 Off 23 |
||
| 173 | CHANNEL24 0023.40 0000.00 1048 0200.00 0800.00 Off 24 |
||
| 174 | CHANNEL25 0000.00 0000.00 1048 0200.00 0800.00 Off 25 |
||
| 175 | CHANNEL26 0000.00 0000.00 1048 0200.00 0800.00 Off 26 |
||
| 176 | CHANNEL27 0000.00 0000.00 1048 0200.00 0800.00 Off 27 |
||
| 177 | CHANNEL28 0000.00 0000.00 1048 0200.00 0800.00 Off 28 |
||
| 178 | CHANNEL29 0000.00 0000.00 1048 0200.00 0800.00 Off 29 |
||
| 179 | CHANNEL30 0000.00 0000.00 1048 0200.00 0800.00 Off 30 |
||
| 180 | CHANNEL31 0000.00 0000.00 1048 0200.00 0800.00 Off 31 |
||
| 181 | |||
| 182 | </pre> |