Wiki » History » Version 3
Alexandre Camsonne, 02/25/2025 02:45 PM
| 1 | 1 | Alexandre Camsonne | h1. Wiki |
|---|---|---|---|
| 2 | |||
| 3 | List of equipement from Japan |
||
| 4 | |||
| 5 | 1. SiPM 3ch Box Qty.4 |
||
| 6 | 2. Special 30m LAN cable Qty.4 |
||
| 7 | 3. Raspberry Pi5 Qty.1 |
||
| 8 | 4. 7 inch Monitor Qty.1 |
||
| 9 | 5. USB-LAN connector Qty.1 |
||
| 10 | 6. Standard LAN cable Qty.2 |
||
| 11 | 7. NIM EASIROC Qty.1 |
||
| 12 | 8. TTL-NIM-TTL 8ch module Qty.1 (https://www.kagaku.com/hoshin/n002.html, 1ch TTLtoNIM, 4ch NIM-TTL will be used) |
||
| 13 | 9. 2ch Gate&Delay Module Qty.2 (http://www.tcnland.co.jp/archives/product_type/gatedelaygenerator_n-tm_307, 4ch G&D will be used) |
||
| 14 | 10. 4ch logic fan I/O Qty.1 (http://www.tcnland.co.jp/archives/product_type/fanin%EF%BC%8Ffanout_n-tm_102, 2ch will be used) |
||
| 15 | |||
| 16 | The SiPM is 3ch SiPM Box x 4 = 12 ch total. All SiPM can be handled by the adobe items. |
||
| 17 | For 8.~10., please arrange for spare modules in case the modules sent from Japan are defective. Equivalent products are fine. |
||
| 18 | We were unable to handle the detector well due to the effects of noise and crosstalk from TTL with standard cat.7 LAN cables or ECL Flat cables. We will provide a cable with an additional shield on the cat.7 cable. |
||
| 19 | 2 | Alexandre Camsonne | |
| 20 | |||
| 21 | Old map of Hall A for previous SBS experiment |
||
| 22 | |||
| 23 | https://userweb.jlab.org/~efuchey/SBS_BB/Pictures/GlobalPlanHallAFloor_lowBBangle.pdf |
||
| 24 | 3 | Alexandre Camsonne | |
| 25 | https://redmine.jlab.org/documents/118 |