Test stand DAQ » History » Revision 9
Revision 8 (Alexandre Camsonne, 12/28/2020 12:24 PM) → Revision 9/17 (Alexandre Camsonne, 12/28/2020 02:44 PM)
h1. [[Run list]]
h1. Test stand DAQ
VME CPU intelvmeha8 ROC2 ROC ID : 4
DAQ computer clrlpc
HV on /dev/ttyUSB2
VME crate on /dev/ttyUSB1
to access use minicom, if you need to setup the port for /dev/ttyUSB1 or USB2 do : minicom -s and change serial settings ( should be 9600 8 N 1 )
DAQ on VNC :1
Log on clrlpc , type tcsh
To start CODA type : startcoda
choose config TIintelvmeha8 and start run
Online diagnostic :
cd DiagGUI/fe_diaggui/
./DiagGUI intelvmeha8.txt
To look at data :
cd companaEcal
./compana
give run number
root file goes in
/home/a-compton/companaEcal/Rootfiles
Few root command to display waveforms :
i=0;
T->Draw("fadc_slot7:Iteration$","","L",1,i++);