Run list¶

Test stand DAQ¶

VME CPU intelvmeha8 ROC2 ROC ID : 4

DAQ computer clrlpc

HV on /dev/ttyUSB2

VME crate on /dev/ttyUSB1

to access use minicom, if you need to setup the port for /dev/ttyUSB1 or USB2 do : minicom -s and change serial settings ( should be 9600 8 N 1 )

DAQ on VNC :1

Log on clrlpc , type tcsh

To start CODA type : startcoda

choose config TIintelvmeha8 and start run

Online diagnostic :

cd DiagGUI/fe_diaggui/
 ./DiagGUI intelvmeha8.txt

To look at data :

cd companaEcal

./compana

give run number

root file goes in

/home/a-compton/companaEcal/Rootfiles

Few root command to display waveforms :
i=0;
T->Draw("fadc_slot7:Iteration$","","L",1,i++);