Actions
December 4th 2025 » History » Revision 1
Revision 1/4
| Next »
Alexandre Camsonne, 12/04/2025 01:34 PM
December 4th 2025
*Status
- GEM ( Ching _
- All MPD and APVs are in ESB
- need VTP and V1495 - CPU and TI
- low voltage
- 1 VXS crate + 1 VME crate for MPD
- 2 QSF board in Hall C
- got fibers from Hall C
- backplanes and adapter : 5 slots - Florian has the one for his chamber - Need more 2 slots ideally - need to get adapter fro Stony Brook
- most hardware - need to setup crate
- EPAS can copy and paste Bill's EPAS
**Computer
- All MPD and APVs are in ESB
- need VTP and V1495 - CPU and TI
- low voltage
- 1 VXS crate + 1 VME crate for MPD
- 2 QSF board in Hall C
- got fibers from Hall C
- backplanes and adapter : 5 slots - Florian has the one for his chamber - Need more 2 slots ideally - need to get adapter fro Stony Brook
- most hardware - need to setup crate
- EPAS can copy and paste Bill's EPAS
- CPU TI SD - using sbsecal4 - need add VTP - SSP for MAROC ***
- 64 channels of SAMPIC
- 8 channels AARDVARC and 8 channels ASOC
- main readout of MRPC will be A/D and vfTDC
- will borrow NINO chips from SBS for the readout
- or NIM A/D
- CDet software
- EPAS
*new switch arriving in January
- one small dumb switch in the rack - pull one 196 cable from rack in HKS
- scintillators
- FADCs for PMT readout : Scintillator, Cerenkov
- VTP
*ECal single trigger
*Scintillator- Ecal+Cerenkov
- Pion trigger - scintillator after calorimeter
- need volounters to program VTP
- analog trigger -
EPAS
*copy from Bill
- we need fibers for VTPs
- need to check data rates and data volumes
Lecroy for PMTs
**MPGD : CAEN ? and SoLID Wiener
- MRPC : HV Wiener - need
- NPS crate in SHMS - Bill can find cards and help with slow control - have positive
Updated by Alexandre Camsonne 4 days ago · 1 revisions