December 4th 2025 » History » Revision 3
Revision 2 (Alexandre Camsonne, 12/04/2025 01:37 PM) → Revision 3/4 (Alexandre Camsonne, 12/04/2025 01:43 PM)
h1. December 4th 2025 *Status ** GEM ( Ching _ *** All MPD and APVs are in ESB *** need VTP and V1495 - CPU and TI *** low voltage *** 1 VXS crate + 1 VME crate for MPD *** 2 QSF board in Hall C *** got fibers from Hall C *** backplanes and adapter : 5 slots - Florian has the one for his chamber - Need more 2 slots ideally - need to get adapter fro Stony Brook *** most hardware - need to setup crate *** EPAS can copy and paste Bill's EPAS ** Computer *** CPU TI SD - using sbsecal4 - need add VTP - SSP for MAROC *** VMM3 board start to setup in ESB - we should have 6 of them - and start testing **MRPC *** 64 channels of SAMPIC *** 8 channels AARDVARC and 8 channels ASOC *** main readout of MRPC will be A/D and vfTDC *** will borrow NINO chips from SBS for the readout *** or NIM A/D *** CDet software *** EPAS ** Infrastructure *** new switch arriving in January *** one small dumb switch in the rack - pull one 196 cable from rack in HKS ** PMTs readout *** scintillators *** FADCs for PMT readout : Scintillator, Cerenkov **Trigger *** VTP ****ECal single trigger ****Scintillator **** Ecal+Cerenkov **** Pion trigger - scintillator after calorimeter **** need volounters to program VTP **** analog trigger - **EPAS ***copy from Bill **Hall C *** we need fibers for VTPs *** need to check data rates and data volumes **High Voltage ***Lecroy for PMTs ***MPGD : CAEN ? and SoLID Wiener *** MRPC : HV Wiener - need *** NPS crate in SHMS - Bill can find cards and help with slow control - have positive *** LAD Crate - **HKS **** DC need more ribbon adapters for vfTDC **** can look at data with trigger time **** FADC v2 for ENGE **** still need to test V3 **** finished test KDC1 and KDC2 ok **** will test all ENGE hodoscope data with FADC **** will test EDC **** LVDS repeater ? - Bill shortened the cable length - 125 ft - 150 ft - 2 to 3 % signal loss - might only need for ENGE - 40 ribbon cables might need repeater