January 14th 2021 » History » Version 3
Alexandre Camsonne, 01/14/2021 03:34 PM
| 1 | 1 | Alexandre Camsonne | h1. January 14th 2021 |
|---|---|---|---|
| 2 | |||
| 3 | 2 | Alexandre Camsonne | * Updates |
| 4 | 1 | Alexandre Camsonne | ** VMM |
| 5 | 3 | Alexandre Camsonne | *** Met with Ben, 1 Gbit ethernet working on developement board, when finished implemented will try run software ( linux, Ben could try to set up on Ed's computer ) |
| 6 | ***diagram test |
||
| 7 | ***VMM test with detector : try to separate the power, check ground connections of chamber to eval board. |
||
| 8 | Separation helped with SAMPA |
||
| 9 | *** prototype board on going - 1 gbit on prototype and try 10 gigE after |
||
| 10 | *** parts from UVA - need to follow up - |
||
| 11 | **APV |
||
| 12 | *** APV : 32 boards received - waiting for front panel prototype - should be ready by end of January |
||
| 13 | *** trying new firmware from Paolo, looks stable and running |
||
| 14 | ** FADC : Ben working on VTP readout for FADC - still need at least 1 week - can see data transported to VTP from FADC firmware from Ed |
||
| 15 | **UMass test stand |
||
| 16 | ***testing with pulse close of calorimeter pulse |
||
| 17 | ***deadtime in raw mode : |
||
| 18 | ***generating asymmetry with pulser |
||
| 19 | ***NIM asymmetry box |
||
| 20 | *Beam test FNAL |
||
| 21 | **support for ECAL beam test |
||
| 22 | ** Ed and Ben provided information for electronics, review was ok, added kapton |