SoLID DAQ » SoLID preRD

h1. January 28th 2021

* Updates

** VMM3

*** major breakthrough 1 Gbit ethernet interface working. start sending data out with checked data,

next step send data from Eval board on network using pulser

*** scale up the 12 channel code to 128 channels - need to check if enough ressources for TMR - bigger FPGA available in same footprint if needed - running on VM on laptop 

*** peaking time of 25 ns for impulse response - VMM find peak on the convolution with charge distribution - so dead time will be longer depending on charge distribution - 50 ns peaking time might have better S/N than 25 to be tested - Weizhi will model 6 bit ADC and ToT - 

*** will try to load firmware - panasonic connector has minimum grounding - NIM trigger gives ground   - will try to plug scope on multiplexed output - no ground from 12 V supply power AC - will try with a supply with ground -  

** MPD in buffered mode - several trigger will corrupt memory in MPD - bug solved and will test with common mode and zero suppression - 1.8 KHz trigger limit right now - looking pretty stable 

*** VXS QSFP : front panel delivered - 1 board assembled - 

** FADC VTP readout on going - will be ready in a few days for Dave to test

** UMass test stand : ordered modules to generate asymmetry - starting working on calorimeter clustering code

network components arriving next week 

** ASOC : working with detector self triggering - will setup external cosmics trigger

** ECAl test complete : hardware coming back this Friday