SoLID DAQ » SoLID preRD

h1. September 3rd 2020

* Updates

** VMM3

*** Progress with Jeff, almost done with schematics ( 8 layers 1 mm pitch FPGA ), still tweaking taking Ben and William feedback, Oscillator to be chosen for ethernet, could use clock from GBT link.

*** Parts in for evaluation board, eval board powered up - need ribbon cables made to connect to eval board -

*** Possible test : could borrow gas system and HV if needed

*** VMM3 eval board : reloaded firmware and board operating correctly, might be pull up resistor which has issues

**** test external trigger : did not work but might miss jumper

**** trying different integration time : for 200 ns 100 ns, no trigger 50 ns ans 25 ns with pulser, need to understand threshold setting                      

** APV25 : 

*** INFN : sbs-aonl account created on all computers triton atedf3 sbsvme20 - readout list need to be adapted -

MPD setup using VME. Issues with configuration with optical - plan to do with VME 

** ASOC : met with Hawai people , still issues, might be hardware, discussion for having a spare

* FNAL test beam

** possible beam test at FNAL : December 9th and 16th - 12 hours beam every day - expect 2 days to setup system

** Manpower : Jixie taking lead and willing to drive

** FNAL MWPC separate DAQ - need to bring DAQ for our detectors

** Xinzhan could help for Fermilab setup , Kondo could be interested - one week before beam test would be safe

** DAQ system : 4 modules + 3 preshower = minimum 6 channels - scintillator trigger ?  Need to look for scintillator trigger : at least 

2 weeks for testing at JLab

** lead plate 6 or 7 mm ? 1 or 2 radiation length - need to check if there are issues to lead loaning and with Fermilab if safety issues

*Write-up

** text from Ed and Ben

** Alex working on draft for Friday

*Nilanga : mention PRAD2 and LAD with large area GEMs, opportunity to test VMM3 

   20 000 channels  

   2 wafers = 200 chips = 12 000 channels

   2 years or more - hit rate low ( Hall B ) - if use GBT trigger and clock  but need FELIX boards for readout

if read with Ethernet need clock and trigger to be developped - 1 GBT for 2 VMM - one FELIX 48 low rate links

 GBT is in initial design. Ed has a few GBT and GBT SCA left but need to get more. GBT 40 to 50 $ and optical

250 $ - 300 $ per board - could lower cost with more VMM per boards 

*Xinzhan waiting for paperwork, might be ready mid September

*SBIR opportunity for GEM ?

*