December 4th 2025 » History » Version 4
Alexandre Camsonne, 12/04/2025 01:45 PM
| 1 | 1 | Alexandre Camsonne | h1. December 4th 2025 |
|---|---|---|---|
| 2 | *Status |
||
| 3 | ** GEM ( Ching _ |
||
| 4 | *** All MPD and APVs are in ESB |
||
| 5 | *** need VTP and V1495 - CPU and TI |
||
| 6 | *** low voltage |
||
| 7 | *** 1 VXS crate + 1 VME crate for MPD |
||
| 8 | *** 2 QSF board in Hall C |
||
| 9 | *** got fibers from Hall C |
||
| 10 | *** backplanes and adapter : 5 slots - Florian has the one for his chamber - Need more 2 slots ideally - need to get adapter fro Stony Brook |
||
| 11 | *** most hardware - need to setup crate |
||
| 12 | *** EPAS can copy and paste Bill's EPAS |
||
| 13 | 2 | Alexandre Camsonne | ** Computer |
| 14 | 1 | Alexandre Camsonne | *** CPU TI SD - using sbsecal4 - need add VTP - SSP for MAROC |
| 15 | 2 | Alexandre Camsonne | *** VMM3 board start to setup in ESB - we should have 6 of them - and start testing |
| 16 | 4 | Alexandre Camsonne | ** MRPC |
| 17 | 1 | Alexandre Camsonne | *** 64 channels of SAMPIC |
| 18 | *** 8 channels AARDVARC and 8 channels ASOC |
||
| 19 | *** main readout of MRPC will be A/D and vfTDC |
||
| 20 | *** will borrow NINO chips from SBS for the readout |
||
| 21 | *** or NIM A/D |
||
| 22 | *** CDet software |
||
| 23 | *** EPAS |
||
| 24 | 2 | Alexandre Camsonne | ** Infrastructure |
| 25 | *** new switch arriving in January |
||
| 26 | 1 | Alexandre Camsonne | *** one small dumb switch in the rack - pull one 196 cable from rack in HKS |
| 27 | |||
| 28 | 2 | Alexandre Camsonne | ** PMTs readout |
| 29 | 1 | Alexandre Camsonne | *** scintillators |
| 30 | *** FADCs for PMT readout : Scintillator, Cerenkov |
||
| 31 | |||
| 32 | |||
| 33 | **Trigger |
||
| 34 | *** VTP |
||
| 35 | ****ECal single trigger |
||
| 36 | ****Scintillator |
||
| 37 | **** Ecal+Cerenkov |
||
| 38 | **** Pion trigger - scintillator after calorimeter |
||
| 39 | **** need volounters to program VTP |
||
| 40 | **** analog trigger - |
||
| 41 | **EPAS |
||
| 42 | ***copy from Bill |
||
| 43 | **Hall C |
||
| 44 | *** we need fibers for VTPs |
||
| 45 | *** need to check data rates and data volumes |
||
| 46 | 2 | Alexandre Camsonne | **High Voltage |
| 47 | 1 | Alexandre Camsonne | ***Lecroy for PMTs |
| 48 | ***MPGD : CAEN ? and SoLID Wiener |
||
| 49 | *** MRPC : HV Wiener - need |
||
| 50 | *** NPS crate in SHMS - Bill can find cards and help with slow control - have positive |
||
| 51 | *** LAD Crate - |
||
| 52 | 3 | Alexandre Camsonne | **HKS |
| 53 | **** DC need more ribbon adapters for vfTDC |
||
| 54 | **** can look at data with trigger time |
||
| 55 | **** FADC v2 for ENGE |
||
| 56 | **** still need to test V3 |
||
| 57 | **** finished test KDC1 and KDC2 ok |
||
| 58 | **** will test all ENGE hodoscope data with FADC |
||
| 59 | **** will test EDC |
||
| 60 | **** LVDS repeater ? - Bill shortened the cable length - 125 ft - 150 ft - 2 to 3 % signal loss - might only need for ENGE - 40 ribbon cables might need repeater |