Feature #617

Re-configure F1 clock to use TI clock

Added by Juan Carlos Cornejo 6 months ago. Updated 6 months ago.

Status:NewStart date:03/29/2021
Priority:NormalDue date:
Assignee:-% Done:


Category:-Spent time:-
Target version:-


Notes from Bryan Moffit:
I took at look at what you need to connect the TI 31.25MHz clock to the F1 FrontPanel SD.
There's some TI switches that need to be set. They're near the top of the module, if you're looking at the PCB with the VME connectors on the right:
(See Attachment #1 - TI_TDC_Switches).

The TDC connector on the TI has these pin outs. Those 4 signals need connected to the f1 front panel SD ( See Attachment #2 - TI TDC Table)

You'll connect the clock to Connector A (14,13) and the rest of the signals to/from connector B on the F1 front panel SD. (See Attachment #3 F1v1 TDC Input Output Table).

TI_TDC_switches.png - TI TDC Switches (108 KB) Juan Carlos Cornejo, 03/29/2021 04:09 PM

TI_TDC.png - TI TDC Table (42.6 KB) Juan Carlos Cornejo, 03/29/2021 04:09 PM

f1tdc_fpsd.png - F1v1 TDC Input Output Table (67.1 KB) Juan Carlos Cornejo, 03/29/2021 04:10 PM


#1 Updated by Alexandre Camsonne 6 months ago

  • Project changed from SuperBigBite-detector to SBS-DAQ-GMn-HCal

Also available in: Atom PDF