Project

General

Profile

Actions

Feature #617

open

Re-configure F1 clock to use TI clock

Added by Juan Carlos Cornejo over 3 years ago. Updated over 3 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Start date:
03/29/2021
Due date:
% Done:

0%

Estimated time:

Description

Notes from Bryan Moffit:
I took at look at what you need to connect the TI 31.25MHz clock to the F1 FrontPanel SD.
There's some TI switches that need to be set. They're near the top of the module, if you're looking at the PCB with the VME connectors on the right:
(See Attachment #1 - TI_TDC_Switches).

The TDC connector on the TI has these pin outs. Those 4 signals need connected to the f1 front panel SD ( See Attachment #2 - TI TDC Table)

You'll connect the clock to Connector A (14,13) and the rest of the signals to/from connector B on the F1 front panel SD. (See Attachment #3 F1v1 TDC Input Output Table).


Files

TI_TDC_switches.png (108 KB) TI_TDC_switches.png TI TDC Switches Juan Carlos Cornejo, 03/29/2021 04:09 PM
TI_TDC.png (42.6 KB) TI_TDC.png TI TDC Table Juan Carlos Cornejo, 03/29/2021 04:09 PM
f1tdc_fpsd.png (67.1 KB) f1tdc_fpsd.png F1v1 TDC Input Output Table Juan Carlos Cornejo, 03/29/2021 04:10 PM
Actions #1

Updated by Alexandre Camsonne over 3 years ago

  • Project changed from SuperBigBite-detector to SBS-DAQ-GMn-HCal
Actions

Also available in: Atom PDF