VMM3¶

Presentation by Ed

• https://redmine.jlab.org/attachments/3105 *

Indra lab VMM testing info¶

Verso ROOT tree analysis¶

Run list¶

TestLab Highbay¶

VMM chip testing¶

here are the info you will need:
Manual: https://cernbox.cern.ch/index.php/s/wGLDBKV1uo37oii
VMM3a specs: https://cernbox.cern.ch/index.php/s/Boqgsyv7Op6wp9A
Software: https://gitlab.cern.ch/NSWelectronics/vmm_readout_software
Base config on continuous: https://redmine.jlab.org/attachments/download/952/9_200_neg_cont.xml
host: 192.168.0.16
255.255.255.0
card is on: 192.168.0.2

https://root-forum.cern.ch/t/root-5-compilation-with-gcc-9/33981/16

Firmware

Setup in INDRA lab

software installed on alkaid /usr/local/src/vmm_readout_software-analog_generator

Test software at :

https://gitlab.cern.ch/giakov/vmm_automated_software

• https://code.jlab.org/fedaq/fw/vmm3a-6bit

• Load bit file - it will assign IP to 192.168.0.20
• make PC on same local subnet - 255.255.255.0
• Run software : petiroc_test

will asked for file output

To generate configuration file : ./create_cfg_file_6bit

choose options