SoLID DAQ » Telescope Cerenkov

h1. Run List2 - after the Covid shutdown 

_*Calibration runs in prep for taking data at high rate*_

_*Run 185*_: Pulser run to look at MaPMT vtpPulser

_*Run 188*_: Cosmic run to look at Calo vtpScaler. Trigger in VTP is Calo only. Bad calo 6-3 is all triggers.

_*Run 189*_: Cosmic run to look at Calo vtpScaler. Trigger in VTP is Calo only. Bad calo 6-3 is all triggers.

_*Run 190*_: Cosmic run to look at Calo vtpScaler. Trigger in VTP is Calo only. Bad calo 6-3 is all triggers.

_*Run 202*_: cosmic run. Calo preamp. All Hv 1200

_*Run 205*_: cosmic run. Calo preamp. All Hv 1200, except 9-1,9-2 HV1100

_*Run 206*_: maPMT checks -pulser trigger

_*Run 207*_: maPMT checks -pulser trigger

_*Run 208*_: maPMT checks -pulser trigger - after taking new PEDs

_*Run 209*_: maPMT checks -pulser trigger - after taking new PEDs

_*Run 210*_: comsics; triggering on calo only

_*Run 211*_: maPMT checks -pulser trigger - after taking new PEDs; Cher th at 17 instead of 20

_*Run 212*_: maPMT checks -pulser trigger - after taking new PEDs; Cher th at 17 instead of 20

_*Run 213*_: maPMT checks -pulser trigger - after taking new PEDs; Cher th at 17 (except for 32 which is at 18) instead of 20; increased HV for 44 from 1085 to 1095 V

_*Run 213*_: maPMT checks -pulser trigger - after taking new PEDs; Cher th at 17 (except for 32 which is at 19) instead of 20; 

_*Run 215*_: Calo gain matching (vtpScalers)

everything at 1200 V except for: cal-92 at 1000 V; cal-64 at 1150 V; cal-91 at 1100 V

_*Run 216*_: Calo gain matching (vtpScalers)

everything the same as for run 215 except for cal-2 at 1170 V; cal-3 at 1230 V; cal-4 at 1265 V

_*Run 218*_: Calo gain matching (vtpScalers)

everything the same as for run 216 except for cal-3 at 1210 V; cal-4 at 1240 V; cal-51 at 1300 V

_*Run 219*_: Calo gain matching (vtpScalers)

only cal-4, cal-51 and cal-64 stayed the same as for run 218 everything else changed as follows: cal-52 at +60 V; cal-53 at +60 V; cal-54 at +15 V; cal-61 at +10 V; cal-62 at +110 V; cal-63 at +50 V; cal-71 at +110 V; cal-72 at +70 V; cal-73 at +55V; cal-74 at +80 V; cal81 at +110 V; cal-82 at +65 V; cal-83 at +35 V; cal-84 at +35 V; cal-91 at +90 V; cal-92 at+10 V; cal-93 at +40 V; cal-94 at +80 V

_*Run 220*_: Calo gain matching (vtpScalers)

everything stayed the same as for run 219 except for: cal-2 at 1180 V; cal-4 at 1247 V; cal-51 at 1350 V; cal-52 at 1265 V; cal-53 at 1285 V; cal-62 at 1342 V; cal-71 at 1345 V; cal-72 at 1310 V; cal-73 at 1262 V; cal-74 at 1320 V; cal-81 at 1380 V; cal-84 at 1255 V; cal-91 at 1280 V; cal-92 at 1045 V; cal-94 at 1320 V

_*Run 222*_: Calo gain matching (vtpScalers)

everything stayed the same as for run 220 except for: cal-1 at 1190 V; cal-3 at 1220 V; cal-51 at 1440 V; cal-52 at 1310 V; cal-53 at 1295 V; cal-61 at 1220 V; cal-62 at 1350 V; cal-63 at 1260 V; cal-64 at 1130 V; cal-71 at 1315 V; cal-72 at 1345 V; cal-73 at 1250 V; cal-74 at 1355 V; cal-81 at 1480 V; cal-82 at 1245 V; cal-83 at 1240 V; cal-84 at 1240 V; cal-91 at 1265 V; cal-93 at 1250 V; cal-94 at 1240 V 

_*Run 223*_: Calo gain matching (vtpScalers)

everything stayed the same as for run 222 except for: cal-51 at 1400 V; cal-52 at 1285 V; cal-64 at 1140 V; cal-71 at 1330 V; cal-72 at 1335 V; cal-74 1335 V; cal-81 at 1430 V; cal-82 at 1255 V; cal-91 at 1275 V; cal-93 at 1245 V; cal-94 at 1285 V; cal-1 at 1195 V; cal-3 at 1212 V; cal-4 at 1242 V

_*Run 224*_: Calo gain matching (vtpScalers)

everything stayed the same as for run 223 except for: cal-91 at 1280 V

_*Run 225*_: Calo gain matching (vtpScalers)

everything stayed the same as for run 224 except for: cal-91 at 1300 V

_*Run 226*_: Calo gain matching (vtpScalers); changed cal-91 from 1300 V to 1260 V

_*Run 227*_: Calo gain matching (vtpScalers); changed cal-91 from 1260 V to 1200 V

_*Run 229*_: Calo gain matching (vtpScalers); changed cal-91 from 1200 V to 1150 V

_*Run 230*_: Calo gain matching (vtpScalers); changed cal-91 from 1150 V to 1170 V

_*Run 231*_: Calo gain matching (vtpScalers); changed cal-91 PMT and base; HV for cal-91 at 1250 V

_*Run 232*_: Calo gain matching (vtpScalers); nothing changed compared to run 231 just taking more data

_*Run 233*_: Calo gain matching (vtpScalers); changed cal-91 from 1250 to 1235 V

_*Run 239*_: Calo gain matching overnight run (vtpScalers); coda lost connection with EB when stopped and had to kcoda

_*vtp Pulser runs for maPMTs checks*_

_*Beam data - tune beam*_

_*Run 262*_: beam

_*Run 263*_: beam

_*Run 264*_: beam; calo TH from 100 to 150 channels - good beam

_*Run 265*_: beam; 

_*Run 266*_: beam; 

_*Run 267*_: beam; 

_*Run 268*_: beam; 

_*Run 269*_: beam; 

_*Run 269*_: beam; changed cal-94 from 1291 to 1296 V; cal-51 from 1400 to 1404 V; cal-52 from 1285 to 1289 V; cal-53 from 1295 to 1301 V; cal-54 1210 to 1214 V

_*Run 270*_: beam;

_*Run 271*_: beam; changed cal-51,62,53,64 TH from 150 to 120

_*Run 271*_: beam; 

_*Run 272*_: beam; 

_*Run 273*_: beam; changed cal-94 HV from 1296 to 1306 V

_*Run 275*_: beam; changed maPMT TH from 20 to 200

_*Run 276*_: beam; changed maPMT TH back 20

_*Run 277*_: beam; vtpPulser with beam

_*Run 278*_: beam; vtpScaler - junk, almost no beam

_*Run 279*_: evening beam; vtp scalers

_*Run 280*_: evening beam; vtp scalers

_*Run 281*_: evening beam; vtp scalers; changed the CHER TH from 20 to 10

_*Run 282*_: evening beam; vtp scalers; CHER TH back to 20 

_*Run 284*_: evening beam; vtp scalers; 

_*CW beam*_

_*Run 285*_: CW beam; crappy beam

_*Run 287*_: CW beam; a bit better beam

_*Run 289*_: CW beam; a bit better beam

_*Run 290*_: CW beam; a bit better beam; vtpPulser

_*Run 291*_: CW beam; a bit better beam; vtpScaler

_*Run 292*_: tune beam; Moller run; all CAL TH at 120 now; crappy beam

_*Run 293*_: tune beam

_*Run 294*_: CW beam

_*Run 295*_: CW beam

_*Run 296*_: CW beam

_*Run 297*_: mostly tune beam

_*Run 298*_: tune + CW beam - vtpPulser; crappy beam; Moller still on

_*Run 299*_: tune + CW beam - vtpPulser; crappy beam; Moller still on

_*Run 300*_: tune + CW beam - vtpPulser; Moller still on

_*Run 301*_: tune + CW beam - vtpPulser; Moller still on

_*Run 302*_: CW beam, good beam, vtpScalers, 1 muA on no target

_*Run 304*_: junk

_*Run 305*_: cosmics

_*Run 306*_: junk

_*Run 307*_: CW 1 muA "no target"; vtpScalers

_*Run 308*_: CW 1 muA "no target"; vtpPulser

_*Run 309*_: CW 1.4 muA "no target"; vtpPulser - trippy beam

_*Run 310*_: CW 1.4 muA "no target"; vtpPulser - kind of trippy beam

_*Run 311*_: CW 1.4 muA "no target"; vtpScaler - trippy beam

_*Run 312*_: CW 1.95 muA "no target"; vtpScaler 

_*Run 313*_: CW 1.95 muA "no target"; vtpPulser

_*Run 314*_: CW 0.5 muA "no target"; vtpScalers

_*LAPPD installation*_

_*Run 315*_: cosmics, calo on; vtpScalers; CALO TH as for beam production

_*Run 316*_: cosmics, calo on; vtpScalers; all CALO TH at 100 - junk

_*Run 317*_: cosmics, calo on; vtpScalers; all CALO TH at 100 -  a bit of beam too :)

_*Run 318*_: beam, calo on; vtpScalers; all CALO TH at 120 

_*Run 319*_: beam, calo on; vtpScalers; all CALO TH at 120 

_*Run 320*_: beam, calo on; vtpScalers; all CALO TH at 120 

_*Run 321*_: beam, calo on; vtpScalers; all CALO TH at 120; S2 HV ON; trigger calo only

_*Run 322*_: beam, calo on; vtpScalers; all CALO TH at 120; S2 HV ON; trigger calo+S2 

_*Run 323*_: beam, calo on, S2 on; vtpScalers; all CALO TH at 120; S2 HV ON; trigger calo+S2 - 3He run

_*Run 324*_: beam, calo on, S2 on; vtpScalers; all CALO TH at 120; S2 HV ON; trigger calo+S2 - Ref cell run

_*Run 325*_: cosmics; CALO TH at 100; triggering on CALO only

_*Run 326*_: troubleshooting S2-5

_*Run 327*_: troubleshooting S2-5

_*Run 328*_: troubleshooting S2-5

_*Run 329*_: troubleshooting S2-5

_*Run 330*_: cosmics; calo trigger only; changed CAL-94 from 1306 V to 1320 V

_*Run 331*_: beam; calo trigger only; 

_*Run 332*_: beam; calo trigger only; took fresh PEDs after changing slots 3,4,5,6 in config file - junk, forgot to turn ON the HV after taking PEDs

_*Run 333*_: beam; calo trigger only; took fresh PEDs after changing slots 3,4,5,6 in config file -

_*Run 334*_: beam; calo trigger only; changed S2-5 from 1380 to 1360 V; S2-2 from 1350 to 1360 V; S2-10 from 1345 to 1360 V; S2-11 from 1380 to 1395 V

_*Run 335*_: beam; calo trigger only; changed S2-5 from 1360 to 1375 V; 

_*Run 336*_: beam; calo trigger only; changed S2-5 from 1375 to 1380 V; 

_*Run 337*_: cosmics; calo trigger only;

_*Runs 338-343*_: junk

_*Run 344*_: vtPulser (no beam); LAPPD HV on; TH =10 channels

_*Run 345*_: vtPulser (no beam); LAPPD HV on; TH =20 channels

_*Run 346*_: vtPulser (no beam); LAPPD HV on; TH =20 channels

_*Run 347*_: vtPulser (no beam); LAPPD HV on; TH =20 channels

_*LAPPD beam*_

_*Run 347*_: vtpScalers (ref cell); LAPPD HV on; TH =20 channels

_*Run 348*_: vtpScalers (ref cell); LAPPD HV on; TH =20 channels

_*Run 349*_: vtpScalers (ref cell); LAPPD HV on; TH =20 channels

_*Run 350*_: vtpScalers (ref cell); LAPPD HV on; TH =70 channels

_*Run 351*_: junk

_*Run 352*_: vtpScalers (ref cell);; LAPPD HV on; TH =70 channels; CAL TH 200

_*Run 354*_: vtpPulser (ref cell);; LAPPD HV on; TH =20 channels; CAL TH 200

_*Run 355*_: vtpPulser (no beam);; LAPPD HV on; TH =20 channels; CAL TH 200

_*LAPPD beam - Sep 05*_

_*Run 356*_: vtpScalers (30 muA beam);; LAPPD HV on; TH =20 channels; CAL TH 120 --> may be junk; CODA was not behaving

_*Run 357*_: vtpScalers (30 muA beam);; LAPPD HV on; TH =20 channels; CAL TH 120

_*Run 360*_: vtpScalers (30 muA beam);; LAPPD HV on; TH =20 channels; CAL TH 120 -- LAPPD trigger only -- junk

_*Run 361*_: vtpScalers (30 muA beam);; LAPPD HV on; TH =10 channels; CAL TH 120 

_*Run 362*_: vtpScalers (30 muA beam);; LAPPD HV on; TH =5 channels; CAL TH 120 

_*LAPPD beam - Sep 05-06*; HV scan_

_*Run 363*_: vtpScalers (30 muA beam);; LAPPD HV 850+K200; TH =5 channels; CAL TH 120 

_*Run 365*_: vtpScalers (30 muA beam);; LAPPD HV 850+K100; TH =5 channels; CAL TH 120 

_*Run 366*_: vtpScalers (30 muA beam);; LAPPD HV 875+K50; TH =5 channels; CAL TH 120 

_*Run 368*_: vtpScalers (30 muA beam);; LAPPD HV 875+K75; TH =5 channels; CAL TH 120 

_*Run 369*_: vtpScalers (30 muA beam);; LAPPD HV 875+K100; TH =5 channels; CAL TH 120 

_*Run 370*_: vtpScalers (30 muA beam);; LAPPD HV 875+K150; TH =5 channels; CAL TH 120 

_*Run 372*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K0; TH =5 channels; CAL TH 120

_*Run 373*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K20; TH =5 channels; CAL TH 120

_*Run 374*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K30; TH =5 channels; CAL TH 120; (good)

_*Run 375*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K40; TH =5 channels; CAL TH 120

_*Run 376*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K25; TH =5 channels; CAL TH 120

_*Run 377*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K50; TH =5 channels; CAL TH 120; (default, good)

_*Run 378*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K60; TH =5 channels; CAL TH 120

_*Run 379*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K75; TH =5 channels; CAL TH 120

_*Run 380*_: vtpScalers (5 muA beam);; LAPPD HV 925/900+K100; TH =5 channels; CAL TH 120; (maybe good?)

_*Run 381*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K100; TH =5 channels; CAL TH 120

_*Run 382*_: vtpScalers (30 muA beam);; LAPPD HV 925/913+K75; TH =5 channels; CAL TH 120

_*Run 383*_: vtpScalers (30 muA beam);; LAPPD HV 925/913+K60; TH =5 channels; CAL TH 120

_*Run 384*_: vtpScalers (30 muA beam);; LAPPD HV 925/913+K50; TH =5 channels; CAL TH 120

_*Run 385*_: vtpScalers (30 muA beam);; LAPPD HV 925/913+K40; TH =5 channels; CAL TH 120

_*Run 386*_: vtpScalers (30 muA beam);; LAPPD HV 925/913+K30; TH =5 channels; CAL TH 120

_*Run 387*_: vtpScalers (30 muA beam);; LAPPD HV 925/913+K20; TH =5 channels; CAL TH 120

_*Run 388*_: vtpScalers (30 muA beam);; LAPPD HV 925/913+K0; TH =5 channels; CAL TH 120

_*Run 389*_: vtpScalers (30 muA beam);; LAPPD HV 925/925+K0; TH =5 channels; CAL TH 120

_*Run 390*_: vtpScalers (30 muA beam);; LAPPD HV 925/925+K20; TH =5 channels; CAL TH 120

_*Run 391*_: vtpScalers (30 muA beam);; LAPPD HV 925/925+K30; TH =5 channels; CAL TH 120

_*Run 393*_: vtpScalers (30 muA beam);; LAPPD HV 925/925+K40; TH =5 channels; CAL TH 120

_*Run 394*_: vtpScalers (30 muA beam);; LAPPD HV 925/925+K50; TH =5 channels; CAL TH 120

_*Run 395*_: vtpScalers (30 muA beam);; LAPPD HV 925/925+K60; TH =5 channels; CAL TH 120

_*Run 396*_: vtScalers (30 muA beam);; LAPPD HV 925/888+K100; TH =5 channels; CAL TH 120

_*Run 397*_: vtScalers (30 muA beam);; LAPPD HV 925/888+K75; TH =5 channels; CAL TH 120

_*Run 398*_: vtScalers (30 muA beam);; LAPPD HV 925/888+K60; TH =5 channels; CAL TH 120

_*Run 399*_: vtpScalers (30 muA beam);; LAPPD HV 925/888+K50; TH =5 channels; CAL TH 120 (very good)

_*Run 400*_: vtpScalers (30 muA beam);; LAPPD HV 925/888+K40; TH =5 channels; CAL TH 120 (good)

_*Run 402*_: vtpScalers (30 muA beam);; LAPPD HV 925/888+K30; TH =5 channels; CAL TH 120

_*Run 403*_: vtpScalers (30 muA beam);; LAPPD HV 925/888+K20; TH =5 channels; CAL TH 120

_*Run 405*_: vtpScalers (30 muA beam);; LAPPD HV 925/888+K0; TH =5 channels; CAL TH 120

_*Run 406*_: vtpScalers (30 muA beam);; LAPPD HV 925/875+K0; TH =5 channels; CAL TH 120

_*Run 407*_: vtpScalers (30 muA beam);; LAPPD HV 925/875+K20; TH =5 channels; CAL TH 120

_*Run 408*_: vtpScalers (30 muA beam);; LAPPD HV 925/875+K30; TH =5 channels; CAL TH 120

_*Run 409*_: vtpScalers (30 muA beam);; LAPPD HV 925/875+K40; TH =5 channels; CAL TH 120

_*Run 410*_: vtpScalers (30 muA beam);; LAPPD HV 925/875+K50; TH =5 channels; CAL TH 120

_*Run 411*_: vtpScalers (30 muA beam);; LAPPD HV 925/875+K50; TH =5 channels; CAL TH 120 (good)

_*Run 413*_: vtpScalers (30 muA beam);; LAPPD HV 925/875+K60; TH =5 channels; CAL TH 120

_*Run 414*_: vtpScalers (30 muA beam);; LAPPD HV 925/875+K75; TH =5 channels; CAL TH 120

_*Run 415*_: vtpScalers (30 muA beam);; LAPPD HV 925/875+K100; TH =5 channels; CAL TH 120

_*LAPPD beam - Sep 06*; Long runs with favorite HV Settings_

_*Run 417*_: vtpScalers (30 muA beam);; LAPPD HV 925/888+K50; TH =5 channels; CAL TH 120

_*Run 418*_: vtpPulser (30 muA beam);; LAPPD HV 925/888+K50; TH =5 channels; CAL TH 120

_*Run 419*_: vtpPulser (30 muA beam);; LAPPD HV 925/900+K30; TH =5 channels; CAL TH 120

_*Run 420*_: vtpPulser (30 muA beam);; LAPPD HV 925/900+K50; TH =5 channels; CAL TH 120

_*Run 421*_: vtpPulser (no beam);; LAPPD HV 925/900+K50; TH =5 channels; CAL TH 120

_*Run 422*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K30; TH =5 channels; CAL TH 120

_*Run 423*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K50; TH =5 channels; CAL TH 120

_*Run 424*_: vtpScalers (30 muA beam);; LAPPD HV 925/888+K50; TH =5 channels; CAL TH 120

_*Run 426*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K30; TH =5 channels; CAL TH 120 (last 10 minutes 15uA beam)

_*Run 427*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K50; TH =5 channels; CAL TH 120 (many beam trips near the end)

_*Sep 7*_

_*Run 428*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K50; TH =5 channels; CAL TH 120; trigger LAPPD only 

_*Run 429*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K50; TH =5 channels; CAL TH 120; trigger LAPPD+CAL 

_*Run 430*_: vtpScalers (30 muA beam);; LAPPD HV 925/888+K50; TH =5 channels; CAL TH 120; trigger LAPPD+CAL 

_*Run 431*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K30; TH =5 channels; CAL TH 120; trigger LAPPD+CAL 

_*Run 432*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K50; TH =5 channels; CAL TH 120; trigger LAPPD+CAL - long run

_*Sep 9*_

_*Run 433*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K50; TH =5 channels; CAL TH 120; trigger LAPPD+CAL no LAPPD HV

_*Run 434*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K50; TH =5 channels; CAL TH 120; trigger LAPPD+CAL no LAPPD HV

_*Run 435*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K50; TH =8 channels; CAL TH 120; trigger LAPPD+CAL no LAPPD HV

_*Run 436*_: vtpScalers (30 muA beam);; LAPPD HV 925/900+K50; TH =8 channels; CAL TH 120; trigger LAPPD+CAL no LAPPD HV; D2 at 10 CH TH, C1 and F3 as well; forgot to end the run LAPPD HV was ramping up towards the end of the run

h2. Run List PreCovid

*MODE 3 Runs - Nitrogen; all detector channels ON*; Cher channels with zero FADC threshold; 3-fold coin

_*Run 54*_: short run to test the analyzer

_*Run 55*_: done

_*Run 59*_: done

*MODE 3 Runs - CO2; all detector channels ON* - 3-fold coin

_*Run 63*_: short to test DAQ/Trigger - calo threshold at 10 channels; scin threshold at 120 channels; Cher threshold at zero 

_*Run 64*_: test DAQ/Trigger - calo threshold at 10 channels; scin threshold at 120 channels; Cher threshold at zero

_*Run 65*_: test DAQ/Trigger - calo threshold at 40 channels; scin threshold at 120 channels; Cher threshold at 20 channels 

_*Run 66*_: Same as run 65. 

_*Run 67*_: adjusted Calorimeter HVs 

_*Run 68*_: adjusted Calorimeter HVs 

*MODE 1 Runs - CO2; all detector channels ON* - 3-fold coin

_*Run 69*_: to test Chao's code

*MODE 3 Beam Scintillator Gain matching*

_*Run 113, 114*_: changed the scin TH from 120 to 160 

_*Run 115, 116*_: changed the scin TH from 160 to 210 

_*Run 117*_: changed the scin TH from 210 to 250

_*Run 132*_: S2 and Calo trigger, scin TH = 200, Cher TH = 20, Calo TH = 40

_*Run 134*_: Calo trigger, scin TH = 200, Cher TH = 20, Calo TH = 40

*MODE 3 Beam Calorimeter Gain matching*

_*Run 135*_: Calo HV 4: 1775V, 5-1: 1800, 5-2: 1800, 5-3: 1900, 5-4:1800, 6-2:1800, 7-2:1775, 8-3: 1800, 8-4:1875, 9-1: 1800, 9-4:1850

_*Run 136*_: Calo HV 4: 1825V, 5-1: 1850, 5-2: 1850, 5-3: 1950, 5-4:1850, 7-2:18255, 9-2: 1600, 9-4:1900

_*Run 137*_: Calo HV 5-3: 2000, 8-4: 1925, 9-4:1950

_*Run 138*_: Calo HV 5-3: 2000, 8-4: 1925, 9-4:1950

_*Run 139*_: changed SUM_THR =3 ( SUM_THR is threshold on the CALO trigger)

_*Run 140*_:  changed SUM_THR =10

_*Run 141*_: changed individual calo thresholds from 40 to 80

_*Run 142*_: Calo HV 1:1750, 2:1825, 3:1800, 4:1875

_*Run 143*_: Add S2 plane to the VTP trigger ( before just calo), changed individual calo thresholds from 80 to 120

_*Run 144*_: same as 143

_*Run 145*_: same as 143

_*Run 146*_: same as 143

_*Run 147*_: same as 143

_*Run 148*_: changed individual calo thresholds from 120 to 150

_*Run 149*_: mistakenly changed calo thresholds 8-1,2,3,4 and 9-1,2,3,4 from 150 to 100

_*Run 150*_: changed time window from 768 to 200ns

_*Run 151*_: same as 150

_*Run 152*_: put calo thresholds 8-1,2,3,4 and 9-1,2,3,4 back to 150, set threshold for 1,2,3,4,5-1,-2,-3,-4 from  150 to 100

*MODE 3 Beam golden Runs - CO2; all detector channels ON* - S2 + calo (after calorimeter gain matching)

_*Run 153*_: same as 152

_*Run 154*_: same as 152

_*Run 155*_: Calo HV 6-1: 1725V, 6-3: 1650V, 7-3: 1800V, 9-2: 1500V

_*Run 156*_: Calo HV 6-1: 1625V, 6-4: 1625V, 7-3: 1760V, 8-2: 1725V

_*Run 157*_: Calo HV 6-1: 1625V, 6-4: 1625V, 7-3: 1760V, 8-2: 1725V

_*Run 159*_: same as 157, steady 30uA on C-OPTICS

_*Run 161*_: 30uA on Pol-He3 cell. Use same scaler data as run 160.

*MODE 1 Beam golden Runs - CO2; all detector channels ON* - S2 + calo (after calorimeter gain matching)

_*Run 158*_: 30uA on multi-foil carbon target, Steve Wood took scaler rates before the run

_*Run 160*_: 30uA on PolHe3 target, took scaler rates before this run